| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review. |
| gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProcess in internal/xds/server/routing.go assumes that an authority value exists and indexes the empty slice. A remote client that can complete transport connection establishment can trigger an index-out-of-bounds panic that is not recovered by the per-RPC goroutine and terminates the entire server process. In insecure or ordinary TLS deployments the request can be unauthenticated, while strict mTLS or ALTS deployments require valid transport credentials before the malformed RPC can reach the interceptor. This issue is fixed in versions 1.82.2 and 1.83.2. |
| GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. Prior to version 4.7.0, GoBGP accepts a zero-length AS_PATH during UPDATE decoding and later panics while validating that attribute for a confederation eBGP peer. The vulnerable path is in the BGP UPDATE validator: a malformed UPDATE that should be rejected as a malformed AS_PATH instead reaches an unchecked `p.Value[0]` access, allowing a configured confederation eBGP peer to trigger a denial of service. Version 4.7.0 patches the issue. |
| PJSIP is a free and open source multimedia communication library written in C. Prior to commit 673b978, a remote out-of-bounds read and write can occur in the SDP negotiator when the remote payload-type map maintenance feature is enabled. assign_pt_and_update_map() in pjmedia/src/pjmedia/sdp_neg.c uses payload-type numbers taken from a remote SDP offer or answer to index fixed-size internal tables without sufficient bounds validation, so a crafted remote SDP can cause memory access outside those tables. The practical impact is memory corruption and denial of service; code execution is not demonstrated. This path is only reached when PJMEDIA_SDP_NEG_MAINTAIN_REMOTE_PT_MAP is enabled. The default is disabled, so default builds are not affected; the feature is an interoperability option that integrating products may enable. This issue has been patched via commit 673b978. |
| PocketMine-MP versions before 4.8.1 fail to validate dye color IDs in banner NBT data during deserialization. Attackers can provide invalid color values in inventory transactions or via commands to trigger undefined offset errors and crash the server. |
| Improper validation of array index in ANGLE in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In BPF instructions that load/store a value from/to a scratch memory register the register index is an unsigned 32-bit integer and must not exceed 15, but libpcap BPF interpreter does not validate the value. In particular uncommon use cases a crafted filter program can cause the interpreter to try reading and writing the OS process memory in the 16GiB starting at the current stack frame on 64-bit architectures and in the entire address space on 32-bit architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses
EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated,
but their get and put callbacks access the value through
ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but wsa-macro was missed.
On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value
sanity check and every read of these controls fails with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
The DBSC5 DRAM controller protects DRAM content using inline ECC.
The inline ECC utilizes areas of DRAM for its operation, which are
in the DRAM address range, but must not be accessed or modified.
Describe the inline ECC carveout areas used by the DBSC5 controller
on this hardware as reserved-memory, which must not be accessed.
Include DRAM areas which are unprotected by ECC as well, those are
parts of the DRAM which directly precede the ECC carveout.
In case of high DRAM utilization, unless the inline ECC carveouts
are properly reserved, Linux may use and corrupt the memory used
by the DBSC5 DRAM controller for inline ECC, which would lead to
the system becoming unstable. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix VPOS/VNEG voltage selector table
The VPOSNEG_table[] mapping does not match the FP9931 datasheet.
The datasheet defines the VPOS/VNEG voltage mapping as:
00h-04h -> 7.04V (-7.04V)
05h -> 7.26V (-7.26V)
06h -> 7.49V (-7.49V)
...
28h-3Fh -> 15.06V (-15.06V)
However, VPOSNEG_table[] has two issues:
1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the
table has 6 entries of 7.04V, causing all subsequent entries to be
shifted by one position.
2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but
the table has only 41 entries. Any selector value above 0x28
would result in an out-of-bounds table access.
Fix both issues by removing the duplicate 7.04V entry and appending
the missing 23 clamped 15.06V entries, bringing the table to the
correct size of 64 entries (0x00~0x3F). |
| Out-of-bounds Write and Improper Validation of Array Index vulnerability in Samsung Open Source TizenFX Samsung/TizenFX allows Overflow Buffers. |
| A malicious virtual function can invoke the certain command handlers in the SMU, causing a denial of service due to out-of-bounds memory read. |
| The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack. |
| rclone versions >= v1.72.0 and <= v1.74.4 (fixed in v1.75.0) contain multiple denial-of-service vulnerabilities in the archive backend's SquashFS parser, which relies on the github.com/diskfs/go-diskfs dependency. The parser fails to validate attacker-controlled superblock and metadata values before use. An attacker who can place or modify a SquashFS image in storage exposed through an rclone :archive: remote can craft a malicious image that triggers an integer division-by-zero panic (zero block size), an out-of-bounds slice panic (out-of-range inode metadata offset), or a non-progress CPU loop (truncated metadata stream). Variants 1 and 2 terminate the rclone process and, via 'rclone serve sftp', can crash the entire SFTP server; variant 3 causes sustained CPU consumption. Parsing is lazy, so a victim or remote client must address or descend into the malicious archive object to trigger it. |
| A stack-based buffer overflow vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to execute arbitrary code by sending specially crafted network traffic. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system. |
| The Zephyr virtio driver does not validate the descriptor-chain head id that the virtio device writes into the used ring. In virtio_isr() (drivers/virtio/virtio_common.c), the device-written vq->used->ring[idx].id is used directly as an index into vq->recv_cbs[] and vq->desc[], which are both allocated with exactly vq->num entries. recv_cbs[] holds {cb, opaque} callback entries, and the indexed callback pointer is then invoked as cbe.cb(cbe.opaque, used_len).
Because the id is consumed as a 16-bit value with no bound check, a malicious or compromised virtio backend (an untrusted hypervisor, or an untrusted hardware/peer-processor virtio device on a PCI or MMIO transport) can supply an id far beyond vq->num. This causes an out-of-bounds read of a {function pointer, argument} pair from heap memory beyond recv_cbs[], after which the driver calls that attacker-shaped pointer in the guest's interrupt context. No guest privileges or user interaction are required; the backend triggers it by writing the shared used ring and raising the queue interrupt.
The result is an arbitrary / attacker-influenced function-pointer call in the Zephyr guest, i.e. a control-flow-hijack primitive that can lead to code execution or, at minimum, a reliable crash. The fix rejects any used-ring id >= vq->num before indexing recv_cbs[]/desc[] or invoking the callback. This affects builds using CONFIG_VIRTIO with the PCI or MMIO transport. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper check for an array index boundary. |
| Deskflow is a keyboard and mouse sharing app. Prior to continuous build 1.26.0.299, a remote unauthenticated Deskflow server can send kMsgDSetOptions (DSOP) values to ServerProxy::setOptions() in src/lib/client/ServerProxy.cpp so that the value following a modifier option poisons m_modifierTranslationTable, after which ServerProxy::translateKey() or ServerProxy::translateModifierMask() indexes the seven-row s_translationTable or s_masks arrays out of bounds, disclosing four bytes at an attacker-selected relative offset or crashing the connected client; an odd option count also causes an out-of-bounds OptionsList read. This issue is fixed in continuous build 1.26.0.299. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an authenticated SSH client can cause a denial of service by sending a pty-req channel request with more than 130 terminal-mode records. The parser in russh/src/server/encrypted.rs stores terminal modes in a fixed 130-entry [(Pty::TTY_OP_END, 0); 130] array but continues increasing the mode count, then constructs an out-of-bounds slice and panics before the application pty_request handler runs. The panic terminates the server session task without causing memory corruption. This issue is fixed in version 0.62.4. |
