| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Fix folio allocation fallback and use-after-put
drm_pagemap_migrate_populate_ram_pfn() had two issues when populating
RAM PFNs with higher-order folios:
1. The higher-order vma_alloc_folio()/folio_alloc() calls did not pass
__GFP_NOWARN, so a THP allocation failure under memory pressure
would spam the kernel log, and there was no fallback path despite a
TODO comment stating one was needed. Add __GFP_NOWARN to the
higher-order allocation and, on failure, fall back to order-0
allocations for the entire range originally covered by the failed
higher-order allocation, leaving MIGRATE_PFN_COMPOUND unset for
those PFNs.
2. In the free_pages error path, order was computed via
folio_order(page_folio(page)) *after* put_page(page) had already
dropped the reference, resulting in a use-after-free/put when that
was the last reference on the page. Compute order before releasing
the page.
Introducing the fallback in 1. also requires the source page array
handed to ->copy_to_ram() to be built differently. Both callers only
populated the entry at the head of each source folio, relying on the
copy callback to derive the rest of the folio from the order recorded
in the matching drm_pagemap_addr. Once the destination has been demoted
to order-0 folios the drm_pagemap_addr entries are per-page, so a source
page is needed for every one of them; leaving them NULL makes the copy
callback stop after the first page and the remainder of the range is
never copied.
The source folio is only split later, by migrate_vma_pages() /
migrate_device_pages(), so its order cannot be used to detect the
demotion - test the destination for MIGRATE_PFN_COMPOUND instead. Factor
the array population out into drm_pagemap_migrate_populate_src_pages()
and use it from both drm_pagemap_evict_to_ram() and
__drm_pagemap_migrate_to_ram(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix mismatched DMA unmap size for large folios
Device-private THP migration maps migration buffers with page_size()
and records that length in dma_info->size. For a compound folio
page_size() is PAGE_SIZE << order, but two teardown sites still pass a
literal PAGE_SIZE to dma_unmap_page():
- nouveau_dmem_migrate_to_ram() on the success path, and
- nouveau_dmem_migrate_copy_one() on the copy-error path.
For an order > 0 folio this unmaps less than was mapped, leaking the
remainder of the IOMMU/IOVA mapping. The other unmap sites, in
nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already
use the saved size; use it here too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: unsubscribe the channel-kill event before the fence context
nouveau_channel_del() tears the fence context down first and only drops
the channel-kill subscription later, in the middle of the nvif object
teardown:
if (chan->fence)
nouveau_fence(chan->cli->drm)->context_del(chan);
...
nvif_object_dtor(&chan->vram);
nvif_event_dtor(&chan->kill);
The subscribed handler is nouveau_channel_killed(), which calls
nouveau_channel_kill() and from there nouveau_fence_context_kill() on
chan->fence. A kill event delivered in that window takes fctx->lock and
walks fctx->pending on a fence context that context_del() has already
freed.
Nothing reaches this below Fermi today, because the subscription is
gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On
Fermi and newer the window is real but narrow, since a kill has to land
exactly while the channel is being destroyed. That is reason enough on
its own, which is why this carries a Fixes: tag. The last patch in this
series subscribes Tesla channels as well; nothing kills those today, so
it does not widen the exposure now, but it is the groundwork for a
recovery path that would, and the ordering is better fixed before that
lands than alongside it.
Drop the subscription before anything it depends on is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix premature region free on failed OP_UNMAP_SPARSE
In nouveau_uvmm_bind_job_submit()'s OP_UNMAP_SPARSE arm, op->reg is set
from nouveau_uvma_region_find(), which only looks the region up and takes
no reference; a region's sole reference is its membership in
uvmm->region_mt. Two failure paths leave op->reg set: the -ENOENT check
when the region is busy, and the drm_gpuvm_sm_unmap_ops_create() failure.
The sibling nouveau_uvmm_sm_unmap_prepare() failure just below clears
op->reg; these two do not.
unwind_continue steps back one op, so the failing op is skipped by the
unwind loop and its op->reg stays set. nouveau_uvmm_bind_job_cleanup()
then enters its if (op->reg) branch and calls nouveau_uvma_region_remove()
and nouveau_uvma_region_put() on it, dropping the tree's sole reference
and freeing a region this job never created. The comment above the
cleanup loop documents the broken invariant: op->reg must be NULL on
submit failure.
This frees a live region on an unrelated failure, reachable single-job
when drm_gpuvm_sm_unmap_ops_create() returns -ENOMEM; if another job owns
the same region, its cleanup then removes and puts the freed region, a
use-after-free. Clear op->reg on both failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: clear VM_MAYWRITE on read-only ublk char device mmap
ublk_ch_mmap() rejects mmap requests with VM_WRITE set, but never
clears VM_MAYWRITE on the resulting read-only mapping. This allows
a userspace daemon to mmap the per-queue command buffer PROT_READ,
then upgrade it to PROT_WRITE via mprotect(), since VM_MAYWRITE was
never cleared.
The command buffer holds struct ublksrv_io_desc entries that are
kernel-written ABI; a writable mapping lets an unprivileged daemon
process corrupt fields such as addr, op_flags, nr_sectors, and
start_sector.
Same bug class as the drm/panthor and drm/vc4 VM_MAYWRITE fixes, and
the 2026-08-13 ptp/vmclock fix (a5edadbae57e).
Verified via mprotect() PoC: before the fix, a PROT_READ mapping can
be upgraded to PROT_READ|PROT_WRITE and a write into the command
buffer corrupts io_desc fields (confirmed under KASAN). After the
fix, mprotect() returns -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix use-after-free when perf mmap() revival races with the last munmap()
perf_mmap_close() drops rb->mmap_count *without* holding
event->mmap_mutex (the refcount_dec_and_test() right before the
refcount_dec_and_mutex_lock() of event->mmap_count). A concurrent
perf_mmap_rb() can slot its entire "revival" path into that window
(perf_mmap holds event->mmap_mutex for its whole duration, including
rb_alloc):
munmap side (perf_mmap_close) mmap side (perf_mmap_rb)
----------------------------------- --------------------------------
rb->mmap_count 1 -> 0 (no lock) (holds event->mmap_mutex)
inc_not_zero(rb->mmap_count) fails
ring_buffer_attach(event, NULL)
rb_alloc() + attach new rb
refcount_set(&event->mmap_count, 1)
lock; event->mmap_count 1 -> 0
ring_buffer_attach(event, NULL)
ring_buffer_put() -> frees the *new* rb
The revival's refcount_set(&event->mmap_count, 1) is an invisible
1 -> 1 write: the close frees the just-revived buffer although the
other process still has it mapped -- a page-level use-after-free
allowing local privilege escalation to root by any unprivileged user
(default kernel.perf_event_paranoid=2).
Swap the order of the two counter updates: event->mmap_count is
dropped first via refcount_dec_and_mutex_lock(), so its 1 -> 0
transition and the ring_buffer_attach() stay serialized with
perf_mmap(). rb->mmap_count == 0 then implies every event using the
buffer is detached already, so the result of the rb->mmap_count drop
can gate the remaining teardown directly and detach_rest is no longer
needed.
An earlier fix for this race from Kyle Zeng and David Lee takes
event->mmap_mutex around both counter updates [0]; here the not-last
close stays lockless. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: add synchronize_net() in gtp_newlink() error path to prevent use-after-free
gtp_newlink()'s error path frees tid_hash and addr_hash without
waiting for an RCU grace period after clearing sk_user_data. A
concurrent gtp_encap_recv() in softirq may still hold the gtp_dev
pointer obtained via rcu_dereference_sk_user_data() and access the
freed memory.
BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152)
Call Trace:
<IRQ>
gtp0_pdp_find+0x1f6/0x200
gtp_encap_recv+0x527/0x24b0
udp_queue_rcv_one_skb+0x75f/0xc10
Add synchronize_net() before the kfree calls in out_hashtable, which
covers all error paths from both gtp_encap_enable() and
gtp_create_sockets(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix tree connection use-after-free in smb2_tree_connect()
ksmbd_tree_conn_connect() publishes a new tree connection in
sess->tree_conns with a single reference and returns its pointer to
smb2_tree_connect(). The handler continues to initialize the object and
build the response after publication. A concurrent session logoff can
erase the connection and drop that reference, freeing the object while
the handler still uses it.
BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90
smb2_tree_connect (fs/smb/server/smb2pdu.c:2872)
handle_ksmbd_work
process_one_work
worker_thread
kthread
After xa_store() succeeds, take a second reference before releasing
tree_conns_lock. The original reference belongs to the xarray entry and
the second belongs to the creating smb2_tree_connect() handler.
Keep the references balanced in every path:
- On normal exit or an error after publication, smb2_tree_connect()
drops its creator reference. Error cleanup also calls
ksmbd_tree_conn_disconnect(), which drops the xarray reference only if
it removes the exact entry.
- SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop
its xarray reference. The request's existing lookup reference remains
owned by the request and is released by the existing cleanup.
- Session LOGOFF removes each entry and drops its xarray reference. If
it wins the race, later cleanup sees that the entry is gone and does
not drop that reference again.
To enforce this ownership, claim the disconnected state and erase the
exact entry atomically under tree_conns_lock. This guarantees one drop
for the xarray reference and one drop by each in-flight user, regardless
of which teardown path wins. If logoff removes the entry before
initialization completes, fail the connect instead of marking the
detached object TREE_CONNECTED. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out-of-bounds read in ext4_read_inline_dir()
ext4_read_inline_dir() can read a dirent header past the end of its inline
buffer, triggering a slab-out-of-bounds read during getdents64():
BUG: KASAN: slab-out-of-bounds in __ext4_check_dir_entry
Read of size 2 at addr ffff88800f3dd23c by task exploit/148
...
__ext4_check_dir_entry
ext4_read_inline_dir
iterate_dir
The dirent payload lives in a buffer of exactly inline_size bytes:
dir_buf = kmalloc(inline_size, GFP_NOFS);
but iteration runs in a position space extra_offset bytes larger
(extra_size = extra_offset + inline_size) so the synthetic "." and ".."
land at their block-dir offsets. A dirent is formed at "dir_buf + pos -
extra_offset", yet the ext4_check_dir_entry() length argument uses the
larger extra_size. A position whose dirent header would extend past
extra_size is therefore accepted, and the rescan loop's rec_len probe and
ext4_check_dir_entry() dereference de->rec_len before the entry is rejected.
Reject a position whose minimum-size dirent header would not fit within
extra_size before forming de, in both the rescan and main loops, and pass
inline_size rather than extra_size to ext4_check_dir_entry() so the length
check matches the physical buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full
The depth check in xfrm6_input_addr() is off by one:
if (1 + sp->len == XFRM_MAX_DEPTH)
goto drop;
...
sp->xvec[sp->len++] = x;
xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode
receive path re-enters IPv6 input via xfrm_trans_reinject() with that
secpath preserved. If the inner packet carries a destination-options HAO
option or a type-2 routing header, xfrm6_input_addr() is called with
sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so
sp->xvec[sp->len++] writes one slot past the 6-element xvec[]. The write
stays within the sec_path allocation (invisible to KASAN); UBSAN_BOUNDS
flags it and panics under panic_on_warn.
Use "sp->len >= XFRM_MAX_DEPTH", matching xfrm_input(). This also
restores one chain level the old check rejected at sp->len == 5.
UBSAN: array-index-out-of-bounds in net/ipv6/xfrm6_input.c:309:10
index 6 is out of range for type 'xfrm_state *[6]' |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject restart table growth beyond U16_MAX entries
During $LogFile replay, log_replay() indexes the transaction table by the
transact_id taken from the log record header. check_log_rec() only
verifies that transact_id is non-zero and properly aligned, not its
magnitude, so a crafted image can request an arbitrarily large index.
alloc_rsttbl_from_idx() grows the table to cover that index via
extend_rsttbl(), which passes the new entry count to init_rsttbl():
rt = init_rsttbl(esize, used + add);
used + add is computed as u32 but init_rsttbl() takes a u16, and the
count is stored in struct RESTART_TABLE as a __le16. When used + add
exceeds U16_MAX it is truncated, init_rsttbl() allocates a table far
smaller than the index requires, and alloc_rsttbl_from_idx() then
dereferences and writes at the original, untruncated offset -- an
out-of-bounds access past the allocation, reachable by mounting a
crafted NTFS image.
BUG: KASAN: use-after-free in alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
Read of size 4 at addr ffff8880327ffff8 by task exploit
alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
log_replay (fs/ntfs3/fslog.c:4562)
ntfs_loadlog_and_replay (fs/ntfs3/fsntfs.c:324)
ntfs_fill_super (fs/ntfs3/super.c:1393)
get_tree_bdev_flags
vfs_get_tree
path_mount
__x64_sys_mount
A restart table is limited to U16_MAX entries by its __le16 count, so a
larger growth request is invalid input. Reject it in extend_rsttbl();
all callers already handle a NULL return. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix out-of-bounds read in read_log_rec_buf()
read_log_rec_buf() copies a log record into a caller buffer starting at
u32 off = lsn_to_page_off(log, lsn) + log->record_header_len;
log->record_header_len (and log->data_off, used for the following pages)
comes verbatim from the on-disk restart area and is only checked for
8-byte alignment in is_rst_area_valid(), so off can exceed
log->page_size. "tail = log->page_size - off" then underflows and
memcpy() reads past the page_size-sized buffer returned by
read_log_page(), spilling adjacent slab memory into the replay buffer.
This is reachable by mounting a crafted NTFS image:
BUG: KASAN: slab-out-of-bounds in read_log_rec_buf+0x216/0x580
Read of size 64 at addr ffff88800a877ff8 by task exploit/127
read_log_rec_buf fs/ntfs3/fslog.c:2299
log_replay fs/ntfs3/fslog.c:4216
ntfs_loadlog_and_replay fs/ntfs3/fsntfs.c:324
ntfs_fill_super fs/ntfs3/super.c:1392
get_tree_bdev_flags fs/super.c:1694
__x64_sys_mount fs/namespace.c:4360
The buggy address is located 4088 bytes to the right of
the 4096-byte region [ffff88800a876000, ffff88800a877000)
Reject an in-page offset outside the current page before the copy.
[[email protected]: replaced the >= sign with >] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate ef->size covers the record's name and value
When an EA record has a non-zero ef->size, ntfs_read_ea() only checks
that the record fits in the remaining buffer (ea_size > bytes), not that
ef->size is large enough to hold the record's own name_len + 1 + elength.
A crafted image can pass validation with, e.g., ef->size = 24 but
elength = 0xffff. ntfs_get_ea() then trusts elength and copies it out of
the undersized record, reading past the kmalloc(info->size) allocation
and leaking heap memory to userspace via getxattr():
BUG: KASAN: slab-out-of-bounds in ntfs_get_ea (fs/ntfs3/xattr.c:302)
Read of size 65535 at addr ffff888100794550 by task exploit
__asan_memcpy (mm/kasan/shadow.c:105)
ntfs_get_ea (fs/ntfs3/xattr.c:302)
ntfs_getxattr (fs/ntfs3/xattr.c:848)
__vfs_getxattr (fs/xattr.c:441)
vfs_getxattr (fs/xattr.c:474)
do_getxattr (fs/xattr.c:800)
path_getxattrat (fs/xattr.c:868)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
The buggy address is located 80 bytes inside of
allocated 84-byte region in cache kmalloc-96
Compute the size the record needs and require ef->size to cover it. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: fix out-of-bounds page array access on empty zisofs block
zisofs_uncompress_block()'s empty-block fast path returns
pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the
decompression path which returns bytes produced relative to poffset.
zisofs_fill_pages() uses that return to advance its page cursor, so when
the zisofs block size is below PAGE_SIZE and a sub-page block leaves
poffset partway into a page, a following empty block over-counts and
advances pages[] one element past its end, after which
"if (poffset && *pages)" reads pages[1] out of bounds. rock.c only
rejects a block-size shift > 17, so a crafted "ZF" Rock Ridge record can
set it below PAGE_SHIFT; the bug is reached by an ordinary read() of a
compressed file on such a mounted ISO9660 image.
Return the byte count relative to poffset and zero only
[poffset, PAGE_SIZE) of the first page, matching the decompression path.
The page-aligned case (poffset == 0) is unaffected.
BUG: KASAN: slab-out-of-bounds in zisofs_read_folio (fs/isofs/compress.c:290)
Read of size 8 at addr ffff88800f5eac48 by task exploit/142
zisofs_read_folio (fs/isofs/compress.c:290)
read_pages (mm/readahead.c:184)
...
filemap_read (mm/filemap.c:2814)
vfs_read (fs/read_write.c:574)
__x64_sys_pread64 (fs/read_write.c:769)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address is located 0 bytes to the right of the
allocated 8-byte region in the kmalloc-8 cache |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: clear vdev->msi_perm after freeing it on init failure
vfio_msi_cap_len() lazily allocates the per-device MSI permission table:
vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT);
if (!vdev->msi_perm)
return -ENOMEM;
ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags);
if (ret) {
kfree(vdev->msi_perm);
return ret; /* vdev->msi_perm left dangling */
}
When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the
error path frees vdev->msi_perm but leaves the freed pointer stored in
it. vdev->msi_perm is not re-zeroed later because struct
vfio_pci_core_device is per-device and persists across open/close cycles,
and the vfio_config_init() error path returns without calling
vfio_config_free(). So the dangling pointer outlives the failed open.
That leads to two use-after-frees on the same device:
1. Reuse. The next vfio_config_init() sees the stale pointer at
"if (vdev->msi_perm) return len;" and reuses the freed object. MSI
config accesses in vfio_pci_config_rw_single() then dereference and
call the freed perm->readfn / perm->writefn function pointers.
2. Double free. A later vfio_config_free() runs free_perm_bits() and
kfree() on the already-freed object.
Fix it by NULLing vdev->msi_perm after the kfree(), matching the
NULL-after-free discipline already used in free_perm_bits() and
vfio_config_free().
BUG: KASAN: slab-use-after-free in vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
Read of size 8 at addr ffff88800fcc88d0 by task exploit/143
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
vfio_pci_config_rw (drivers/vfio/pci/vfio_pci_config.c:1986)
vfio_pci_rw (drivers/vfio/pci/vfio_pci_core.c:1599)
vfs_read (fs/read_write.c:572)
__x64_sys_pread64 (fs/read_write.c:764)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Followed on device close by a double free of the same object:
Oops: general protection fault, probably for non-canonical address
0x1f63e0e8000008: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:kfree (mm/slub.c:6711)
Call Trace:
vfio_config_free (drivers/vfio/pci/vfio_pci_config.c:1861)
vfio_pci_core_disable (drivers/vfio/pci/vfio_pci_core.c:685)
vfio_pci_core_close_device (drivers/vfio/pci/vfio_pci_core.c:777)
vfio_df_close (drivers/vfio/vfio_main.c:602)
vfio_device_fops_release (drivers/vfio/vfio_main.c:648)
__fput (fs/file_table.c:512)
__x64_sys_close (fs/open.c:1496)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation
Computing the effects of a TLB invalidation involves looking at
the size of the mapping cached by the TLB. For S1 mappings such as
VNCR, this is deducted from the combination of the base granule size
and the mapping level.
However, this implies that the S1 MMU is *on*. When the MMU is off,
we indicate this with the level being set to a "creative" value of
-127 (S1_MMU_DISABLED).
This ends-up being misinterpreted by pgshift_level_to_ttl() as it
doesn't handle negative levels at all (the level is immediately cast
to a u8 and only the bottom two bits considered), leading to an
invalidation size of 0. Not helpful.
Tidy-up pgshift_level_to_ttl() to handle these negative levels, and
ttl_to_size() to always return SZ_1G when no valid TTL is present.
This allows the removal of open-coded checks for similar situations.
Note that the check for a negative value not explicitely checking for
S1_MMU_DISABLED is deliberate, so that actual negative levels introduced
with LVA2 and D128 can take the same path if we ever support them. |
