| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Magee Shortcodes WordPress plugin through 2.1.1 does not restrict the recipient of some of its unauthenticated contact-form actions, allowing unauthenticated users to send arbitrary emails to any address through the site (mail relay). |
| The Nexi XPay Build WordPress plugin through 7.6.2 does not correctly validate the security token on its payment notification route, accepting the request when the target order has no stored token, which allows unauthenticated attackers to mark arbitrary orders as paid, or to mark genuinely paid orders as failed. |
| MiniUPnPd through 2.3.11 built with --strict contains a divide-by-zero vulnerability in ProcessSSDPData() that allows unauthenticated local network attackers to crash the daemon. Attackers can send a single multicast M-SEARCH datagram with MX: 0 and a known ST to port 1900, triggering SIGFPE and denying UPnP IGD service. |
| Rundeck before 6.2.0 contains an OS command injection vulnerability that allows authenticated users with job run permission to execute commands on Windows nodes by supplying crafted option values. Attackers can inject cmd.exe metacharacters such as && or | into free-text options, which CLIUtils.quoteWindowsCMDArg wraps in ineffective single quotes, running commands with node executor credential privileges. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in AF themes WP Post Author wp-post-author allows Blind SQL Injection.This issue affects WP Post Author: from n/a through 4.0.0. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in 10Web Slider by 10Web slider-wd allows Blind SQL Injection.This issue affects Slider by 10Web: from n/a through 1.2.63. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() -> isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't free driver-owned scan requests
When an interface goes down while a scan is running, cfg80211 completes
the scan towards userspace and frees the scan request. However, the
driver can be convinced that it owns the request, since the cancellation
is (intended to be) asynchronous.
The WARN_ON() in the netdev notifier was meant to catch this, but it's
not actually avoidable, so it triggers and we get a UAF in scan_done().
There doesn't seem to be a great way around it, so just track that the
driver is still convinced it owns the request, and then just free it on
completion if it was already cancelled. Also remove the warnings since
they can trigger in the intended architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: downgrade zerocopy managed frags before mutating skb frags
On the out-of-place output path (esp->inplace == false) ESP rewrites the
skb frag array: esp_output_head() appends a trailer frag and
esp_output_tail() replaces the frags with a destination page, both
referenced with get_page().
When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the
payload frags are owned by the ubuf and must not be referenced or
unreferenced individually, but ESP mutates the frag array without ever
downgrading the skb. This breaks the managed-frag invariant two ways:
- esp_ssg_unref() walks the source scatterlist and drops a page
reference for every frag, including the ubuf-owned payload frags,
pushing their refcount below the GUP pin bias while the pages are
still pinned, i.e. a use-after-free of the zerocopy pages;
- esp_output_tail() installs its destination page as frag 0 with
get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so
skb_release_data() takes the skip_unref branch and never drops that
reference, leaking the x->xfrag page at packet rate.
Fix this the way every other frag-mutating site does (__ip_append_data(),
__ip6_append_data(), tcp_sendmsg_locked()) and call
skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes
a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS,
so the per-frag unref in esp_ssg_unref() and the frag release in
skb_release_data() are both balanced and no mixed-ownership frag array is
left behind. |
| The Yaad Sarig Payment Gateway For WC WordPress plugin before 2.2.13 does not verify authorization or that the requesting user owns the target order in several of its order payment-processing actions, allowing any authenticated user, including subscribers, to act on and alter orders belonging to other customers. |
| LMCache multiprocess mode, also called distributed mode, opens an unauthenticated ZeroMQ ROUTER so worker processes can register and share KV cache blocks. Messages on that socket are msgpack. Extension code 1 is passed to DeviceIPCWrapper.Deserialize, which calls pickle.loads, while the server is still decoding request arguments and before the handler runs. A single unauthenticated ZMQ DEALER message to the transport port (default 5555) therefore executes code as the user the LMCache process runs as. Official container images run that process as root. The transport binds to localhost unless the operator sets a routable address with --host, which is how multi-node deployments let peers connect. |
| An SQL Injection vulnerability exists in the Site Search function of Movable Type, which may allow an unauthenticated attacker to execute an arbitrary SQL query on the affected product. |
| Apache YuniKorn 1.8.0 and later, if configured with the LDAP group resolver, crashes due to an out of bounds read processing group membership entries.If the LDAP server returns a group membership entry, memberOf attribute, for a user specified in the pod the server crashes if a membership record does not start with "CN=".
This only affects install that have the non default LDAP group provider configured.
Users are recommended to upgrade to version 1.10.0, which fixes this issue. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in SERVIT Software Solutions affiliate-toolkit affiliate-toolkit-starter allows Blind SQL Injection.This issue affects affiliate-toolkit: from n/a through 3.9.1. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Sarah Giles Dynamic User Directory dynamic-user-directory allows Blind SQL Injection.This issue affects Dynamic User Directory: from n/a through 2.4. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, net.jpountz.lz4.LZ4BlockInputStream refill() validates that the compressedLen field in a legacy LZ4Block header is nonnegative but allocates a compressed-input buffer of that attacker-controlled size before reading payload data, allowing a header-only stream to request a near-2 GiB allocation and exhaust the JVM heap. Canonical writers emit raw blocks when compression is not smaller than the original block, but vulnerable readers accept non-canonical oversized compressed blocks. This issue is fixed in version 1.11.2. |
| Clickjacking in EVP in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Use of released resource in Session in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| Incorrect authorization in WebAppInstalls in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
