| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, two concurrent token-exchange requests using the same OAuth authorization code could each mint a distinct valid (access_token, refresh_token) pair, breaking the single-use guarantee that PKCE relies on. This vulnerability is fixed in 2026.05.1. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, the refresh-token cookie was set with httpOnly: true but missing both the secure flag and the sameSite attribute. Over plain HTTP the cookie could be intercepted on the network; without sameSite, browsers attached it to cross-site POSTs, enabling CSRF against the token-refresh endpoint. This vulnerability is fixed in 2026.04.1. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
The generic/642 test-case can reproduce the kernel crash:
[40243.605254] ------------[ cut here ]------------
[40243.605956] kernel BUG at fs/ceph/xattr.c:918!
[40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI
[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)
[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[40243.611820] Workqueue: ceph-msgr ceph_con_workfn
[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0
[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc
[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287
[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000
[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000
[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000
[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000
[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd
[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000
[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0
[40243.627408] Call Trace:
[40243.627839] <TASK>
[40243.628188] __prep_cap+0x3fd/0x4a0
[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0
[40243.629474] ceph_check_caps+0x46a/0xc80
[40243.630094] ? __lock_acquire+0x4a2/0x2650
[40243.630773] ? find_held_lock+0x31/0x90
[40243.631347] ? handle_cap_grant+0x79f/0x1060
[40243.632068] ? lock_release+0xd9/0x300
[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340
[40243.633429] ? lock_release+0xd9/0x300
[40243.634052] handle_cap_grant+0xcf6/0x1060
[40243.634745] ceph_handle_caps+0x122b/0x2110
[40243.635415] mds_dispatch+0x5bd/0x2160
[40243.636034] ? ceph_con_process_message+0x65/0x190
[40243.636828] ? lock_release+0xd9/0x300
[40243.637431] ceph_con_process_message+0x7a/0x190
[40243.638184] ? kfree+0x311/0x4f0
[40243.638749] ? kfree+0x311/0x4f0
[40243.639268] process_message+0x16/0x1a0
[40243.639915] ? sg_free_table+0x39/0x90
[40243.640572] ceph_con_v2_try_read+0xf58/0x2120
[40243.641255] ? lock_acquire+0xc8/0x300
[40243.641863] ceph_con_workfn+0x151/0x820
[40243.642493] process_one_work+0x22f/0x630
[40243.643093] ? process_one_work+0x254/0x630
[40243.643770] worker_thread+0x1e2/0x400
[40243.644332] ? __pfx_worker_thread+0x10/0x10
[40243.645020] kthread+0x109/0x140
[40243.645560] ? __pfx_kthread+0x10/0x10
[40243.646125] ret_from_fork+0x3f8/0x480
[40243.646752] ? __pfx_kthread+0x10/0x10
[40243.647316] ? __pfx_kthread+0x10/0x10
[40243.647919] ret_from_fork_asm+0x1a/0x30
[40243.648556] </TASK>
[40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore
[40243.654766] ---[ end trace 0000000000000000 ]---
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__bui
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix RCU stall in bpf_fd_array_map_clear()
Add a missing cond_resched() in bpf_fd_array_map_clear() loop.
For PROG_ARRAY maps with many entries this loop calls
prog_array_map_poke_run() per entry which can be expensive, and
without yielding this can cause RCU stalls under load:
rcu: Stack dump where RCU GP kthread last ran:
CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef)
Workqueue: events prog_array_map_clear_deferred
RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246
Call Trace:
<TASK>
prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096
__fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925
bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline]
prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141
process_one_work+0x898/0x19d0 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x770/0x10b0 kernel/workqueue.c:3400
kthread+0x465/0x880 kernel/kthread.c:464
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: return VMA snapshot from task_vma iterator
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted. |
| A Stored Cross-Site Scripting (XSS) vulnerability exists in Frappe Framework version 17.0.0-dev due to unsafe evaluation of user-controlled data in the Number Card component. |
| jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.21.0 until 2.21.4 and 3.1.4, in BeanDeserializer._deserializeUsingPropertyBased, the active-view (@JsonView) filter was applied only to creator properties; the regular property-buffering branch performed no prop.visibleInView(activeView) check. A change making SetterlessProperty.isMerging() return true routed setterless Collection/Map properties through this unguarded path, so a setterless collection annotated with a restricted @JsonView is populated from attacker JSON even when the active view excludes it. This vulnerability is fixed in 2.21.4 and 3.1.4. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent lockup in requeue-PI during signal/ timeout wakeup
During wait-requeue-pi (task A) and requeue-PI (task B) the following
race can happen:
Task A Task B
futex_wait_requeue_pi()
futex_setup_timer()
futex_do_wait()
futex_requeue()
CLASS(hb, hb1)(&key1);
CLASS(hb, hb2)(&key2);
*timeout*
futex_requeue_pi_wakeup_sync()
requeue_state = Q_REQUEUE_PI_IGNORE
*blocks on hb->lock*
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_IGNORE => -EAGAIN
double_unlock_hb(hb1, hb2)
*retry*
Task B acquires both hb locks and attempts to acquire the PI-lock of the
top most waiter (task B). Task A is leaving early due to a signal/
timeout and started removing itself from the queue. It updates its
requeue_state but can not remove it from the list because this requires
the hb lock which is owned by task B.
Usually task A is able to swoop the lock after task B unlocked it.
However if task B is of higher priority then task A may not be able to
wake up in time and acquire the lock before task B gets it again.
Especially on a UP system where A is never scheduled.
As a result task A blocks on the lock and task B busy loops, trying to
make progress but live locks the system instead. Tragic.
This can be fixed by removing the top most waiter from the list in this
case. This allows task B to grab the next top waiter (if any) in the
next iteration and make progress.
Remove the top most waiter if futex_requeue_pi_prepare() fails.
Let the waiter conditionally remove itself from the list in
handle_early_requeue_pi_wakeup(). |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Clear rel_deadline when initializing forked entities
A yield-triggered crash can happen when a newly forked sched_entity
enters the fair class with se->rel_deadline unexpectedly set.
The failing sequence is:
1. A task is forked while se->rel_deadline is still set.
2. __sched_fork() initializes vruntime, vlag and other sched_entity
state, but does not clear rel_deadline.
3. On the first enqueue, enqueue_entity() calls place_entity().
4. Because se->rel_deadline is set, place_entity() treats se->deadline
as a relative deadline and converts it to an absolute deadline by
adding the current vruntime.
5. However, the forked entity's deadline is not a valid inherited
relative deadline for this new scheduling instance, so the conversion
produces an abnormally large deadline.
6. If the task later calls sched_yield(), yield_task_fair() advances
se->vruntime to se->deadline.
7. The inflated vruntime is then used by the following enqueue path,
where the vruntime-derived key can overflow when multiplied by the
entity weight.
8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility
calculation, and can eventually make all entities appear ineligible.
pick_next_entity() may then return NULL unexpectedly, leading to a
later NULL dereference.
A captured trace shows the effect clearly. Before yield, the entity's
vruntime was around:
9834017729983308
After yield_task_fair() executed:
se->vruntime = se->deadline
the vruntime jumped to:
19668035460670230
and the deadline was later advanced further to:
19668035463470230
This shows that the deadline had already become abnormally large before
yield_task_fair() copied it into vruntime.
rel_deadline is only meaningful when se->deadline really carries a
relative deadline that still needs to be placed against vruntime. A
freshly forked sched_entity should not inherit or retain this state.
Clear se->rel_deadline in __sched_fork(), together with the other
sched_entity runtime state, so that the first enqueue does not interpret
the new entity's deadline as a stale relative deadline. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()
Fix inverted condition that skips frequency change trigger,
causing kernel panics during cpufreq scaling. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: terminate the cached volume label after UTF-8 conversion
ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()
and stores the result in sbi->volume.label. The converted label is later
exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only
returns the number of bytes written and does not add a trailing NUL.
If the converted label fills the entire fixed buffer,
ntfs3_label_show() can read past the end of sbi->volume.label while
looking for a terminator.
Terminate the cached label explicitly after a successful conversion and
clamp the exact-full case to the last byte of the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: Fix error pointer dereference
The variable tps->partner is checked for an error pointer and then if it
is, it sends an error message but does not return and then immediately
dereferenced a few lines below:
tps->partner = typec_register_partner(tps->port, &desc);
if (IS_ERR(tps->partner))
dev_warn(tps->dev, "%s: failed to register partnet\n", __func__);
if (desc.identity) {
typec_partner_set_identity(tps->partner);
cd321x->cur_partner_identity = st.partner_identity;
}
Add early return and fix spelling mistake in error message.
Detected by Smatch:
drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error:
'tps->partner' dereferencing possible ERR_PTR() |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix deadlock in hid_post_reset()
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them. |
| motionEye (mEye) is an online interface for a piece of software called "motion," which is a video surveillance program with motion detection. Versions prior to 0.44.0 contain an absolute path traversal vulnerability in multiple media file handlers that allows an attacker to read arbitrary files from the filesystem. The affected handlers accept a user-controlled filename parameter and construct filesystem paths using `os.path.join()`. When an absolute path is supplied, Python discards the configured media directory and returns the attacker-supplied path directly. The application then bypasses Tornado's built-in path validation by overriding the relevant safety checks. As a result, an attacker can access files outside of the configured camera media directory, subject to the permissions of the motionEye process. Version 0.44.0 fixes the issue. |
| jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.13.0 until 2.14.0, a potential Denial-of-Service exists when attacker sends deeply nested JSON if (and only if) the service reads deeply nested (1000s of levels) JSON as JsonNode (ObjectMapper.readTree()) and writes out same (or modifided) node using JsonNode.toString(). This can consume significant amount of resources with concurrent relatively small requests (1000 nested arrays is 2kB). This vulnerability is fixed in 2.14.0. |
| A vulnerability in SP Page Builder for Joomla allows unauthenticated users to upload arbitrary files, ultimately resulting in the upload and execution of PHP code. |
