| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add validation for node in acpi_ns_build_normalized_path()
Add validation for node in acpi_ns_build_normalized_path()
to prevent use-after-free vulnerabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix UAF race in destroy_queue_cpsch
wait_on_destroy_queue() drops locks to wait for queue resume, allowing
a concurrent destroy to free the queue. Use is_being_destroyed flag to
serialize destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidpp: fix potential UAF in hidpp_connect_event()
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move free_irq out of the close-time spinlocked section
au1000_close() calls free_irq() while aup->lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol()
If during relocation we fail in insert_dirty_subvol() because
btrfs_update_reloc_root() returned an error, we will leave a root's
reloc_root field pointing to a reloc root that was freed instead of NULL,
resulting later in a use-after-free, or double free attempt during
unmount.
The sequence of steps is this:
1) During relocation the call to btrfs_update_reloc_root() in
insert_dirty_subvol() fails, so insert_dirty_subvol() returns the
error to merge_reloc_root() without adding the root to the list
rc->dirty_subvol_roots;
2) Then merge_reloc_root() aborts the current transaction because
insert_dirty_subvol() returned an error;
3) Up the call chain, merge_reloc_roots() gets the error, adds the
reloc root for root X to the local reloc_roots list and jumps to the
'out' label, where it calls free_reloc_roots() to free all the reloc
roots in the local reloc_roots list. This frees the reloc root for
root X;
4) We go up the call chain to relocate_block_group() which calls
clean_dirty_subvols() to go over dirty roots and set their
->reloc_root field to NULL, but root X is not in the dirty_subvol_roots
list, so its ->reloc_root still points to a reloc root;
5) Relocation finishes, with an error and a transaction abort, but the
->reloc_root field for root X still points to the reloc root that was
freed in step 3;
6) When unmounting the fs we end up calling:
btrfs_free_fs_roots()
btrfs_drop_and_free_fs_root()
--> calls btrfs_put_root() against root X's ->reloc_root
which is not NULL and points to the already freed
reloc root in step 4 above
Resulting in a use-after-free to a double free attempt.
Syzbot reported this with the following dmesg/syslog:
[ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5)
[ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure
[ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5
[ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction.
[ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0
[ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure
[ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly
[ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure
[ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1
[ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30
[ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30
[ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409
[ 106.682946][ T5338] ==================================================================
[ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250
[ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338
[ 106.693173][ T5338]
[ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
[ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 106.694300][ T5338] Call Trace:
[ 106.694308][ T5338] <TASK>
[ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150
[ 106.694331][ T5338] print_address_description+0x55/0x1e0
[ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250
[ 106.694358][ T5338] print_report+0x58/0x70
[ 106.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: flush backend after device ioctls
vhost-scsi translates guest response descriptors into userspace iovecs
when commands are submitted. Target-core completes those commands
asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while
an in-flight command still retains response iovecs translated through the
old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command
completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device
ioctl. This waits for in-flight commands that can still use the old
response iovecs before the ioctl returns. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix UAF in selftest IOPF reporting
IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from
group->pasid_array without synchronizing against PASID detach,
then a concurrent iommu_report_device_fault() can dereference
that borrowed handle's domain pointer after the detach erases
the handle and frees the backing struct iommufd_attach_handle.
TRIGGER_IOPF then dereferences the freed handle, causing a UAF.
Fix by adding a iopf_rwsem in mock_dev to follow the expected design
of a real driver. Hold its read side across the whole
iommu_report_device_fault() call, and its write side around every
path that attaches, detaches, or replaces a device domain.
This can block new reports and drains in-flight reports before an old
attach handle or the IOPF fault parameter can be removed.
Also take the write side while registering a mock device, since
it can invoke the mock driver's default-domain attach callback. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix shadow paging use-after-free due to unexpected role
Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due
to unexpected GFN") fixed a shadow paging mismatch between stored and
computed GFNs; the bug could be triggered by changing a PDE mapping from
outside the guest, and then deleting a memslot. The rmap_remove()
call would miss entries created after the PDE change because the GFN
of the leaf SPTE does not match the GFN of the struct kvm_mmu_page.
A similar hole however remains if the modified PDE points to a non-leaf
page. In this case the gfn can be made to match, but the role does not
match: the original large 2MB page creates a kvm_mmu_page with direct=1,
while the new 4KB needs a kvm_mmu_page with direct=0. However,
kvm_mmu_get_child_sp() does not compare the role, and therefore reuses
the page.
The next step is installing a leaf (4KB) SPTE on the new path which
records an rmap entry under the gfn resolved by the walk. But when
that child is zapped its parent kvm_mmu_page has direct=1 and
kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as
sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[]
in older kernels). It therefore fails to remove the recorded entry.
When the memslot is dropped the shadow page is freed but the rmap
entry survives, as in the scenario that was already fixed. Code that
later walks that gfn (dirty logging, MMU notifier invalidation, and
so on) dereferences an sptep that lies in the freed page, causing the
use-after-free. |
| In JetBrains IntelliJ IDEA before 2026.2.3 rCE via Structural Search script constraints was possible in untrusted projects |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix UAF via dangling GEM handle in create_bo
rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via
drm_gem_handle_create() early on, then performs several operations that
can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after
the handle is live, the error path calls drm_gem_shmem_object_free()
which kfree's the object without removing the handle from the IDR.
This leaves a dangling handle pointing to freed slab memory. Any
subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls
drm_gem_object_lookup() and dereferences freed memory (UAF).
Fix by moving drm_gem_handle_create() to after all fallible operations
succeed, matching the pattern used by panfrost, lima, and etnaviv.
Also fix drm_mm_insert_node_generic() whose return value was silently
overwritten by iommu_map_sgtable() on the next line. Add the missing
error check.
[tomeu: Move handle creation to the very end] |
| Mooncake transfer engine before 0.3.13 contains an untrusted pointer dereference in ServerSession::readHeader that allows unauthenticated attackers to read and write arbitrary process memory via the TCP transport data port. Attackers can send a crafted SessionHeader with arbitrary addr and size values using READ or WRITE opcodes to disclose KV cache contents, prompts and secrets or corrupt memory toward code execution. |
| A local attacker with control over GRUB's configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.
The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules. |
| Dell PowerStore contains an Inclusion of Functionality from Untrusted Control Sphere vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to execute arbitrary code with root privileges.. |
| Access of Uninitialized Pointer vulnerability in Apache Thrift c_glib bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Use after free in DevTools in Google Chrome prior to 154.0.8037.57 allowed a remote attacker leveraging social engineering to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| An unprivileged, memory-protected ThreadX module can have the kernel read and write memory at addresses of its choosing, in privileged mode, and can use that to clear the MPU enable bit and remove its own isolation boundary.
The Module Manager decided whether a privileged service could dereference an object address a module named by asking only whether that address fell outside the module. The manager's object pool is outside every module, so the test was satisfied by an address shifted into the interior of one of the module's own privileged allocations, which denotes no object at all. The bytes such an address presents as a control block are bytes the module put there through ordinary create and set services, so the control block ID at the front of them could be made to read as any type the module chose, and the `_txe_` layer's ID test then agreed. The reported chain uses that to reach a privileged `memset` across an attacker-chosen range. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry
svcauth_gss_decode_credbody() writes the caller's
rpc_gss_wire_cred field by field and assigns gc_ctx.len only on
the success tail. The caller storage is svcdata->clcred, which
lives in the per-svc_rqst gss_svc_data and is reused across
requests. Early decode failures leave partially decoded state
mixed with residue from the prior request.
The trailing body_len tightness check is the sharpest case:
xdr_stream_decode_opaque_inline() has already written gc_ctx.data
with a borrowed inline pointer into the current request's XDR
pages, but gc_ctx.len retains its prior value. Once the request
pages are released the pooled clcred carries a dangling pointer
paired with a stale length.
Zero the caller's rpc_gss_wire_cred at function entry so that
every early-return path leaves a deterministic all-zero cred.
On the trailing tightness-check path, gc_ctx.len is now zero
instead of stale, which neuters length-driven consumers such as
gss_svc_searchbyctx() that would otherwise walk the dangling
data pointer. |
