| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: The OpenSSL QUIC server, when configured to not preform address
validation, can be forced to count incoming packets multiple times in its
unvalidated credit computation, leading to a violation of the RFC 9000
unvalidated connection amplification limit of 3 times the amount of data
received.
Impact summary: A remote attacker able to spoof packets to a server using the
OpenSSL QUIC implementation might use the server for an amplification of
a DDoS attack.
CWE: CWE-440: Expected Behavior Violation
Description: OpenSSL's QUIC stack, when operating as a server, enforces client
address validation (RFC 9000, Section 8), to confirm the peer address is not
used for a traffic amplification attack. If this feature is disabled on the
server, the QUIC stack limits the amount of server data that can be sent to 3
times the amount of data received from the peer address, until such time as the
TLS handshake is completed.
The OpenSSL QUIC server, when operating in non-validation mode, adds the
length of the whole datagram received to the unvalidated credit limit when
processing each QUIC packet in the datagram. A remote peer may,
after establishing a connection with an initial client hello frame, send a
subsequent datagram containing multiple QUIC packets, leading the server to
account the entire datagram length for each packet in the datagram, resulting
in the server believing that the peer has sent more data than it actually has,
thereby violating the 3x amplification limit mandated by the RFC.
FIPS impact: no
As the QUIC stack lives outside the FIPS module boundary, no FIPS modules
are affected by this CVE. |
| Issue summary: A certificate with many nameRelativeToCRLIssuer CRL
distribution points causes disproportionate heap growth when OpenSSL caches
X.509 extensions.
Impact summary: Receiving a crafted certificate from a malicious peer can lead
to significant memory pressure and possible Denial of Service in clients or
in servers that solicit client certificates.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: A certificate or a set of certificates that fits under the limit for
size of certificates accepted from the peer (~100 KiB) can result in allocation
of several hundred MiB of resident memory on the receiving side
during a normal TLS handshake. This may be enough to crash the client or
server, if multiple concurrent connections lead to similarly large memory
allocations.
The fix postpones processing of the CRL distribution points extensions in
certificates to the time when the processed value is required for CRL processing.
This avoids keeping large memory allocations for a long time when such
certificates are received.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.
Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.
CWE: CWE-1284: Improper Validation of Specified Quantity in Input
Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.
In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.
The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: A CMP client that requests certificate revocation on the basis
of a PKCS#10 CSR may dereference a NULL pointer and terminate abnormally when
processing a crafted revocation response.
Impact summary: The NULL pointer dereference happens on a read which
leads to a crash and a Denial of Service for the affected client application.
CWE: CWE-476: NULL-pointer dereference
Description: A CMP client revoking a certificate has to tell the server which
certificate to revoke, and may do so by supplying a PKCS#10 CSR instead of the
certificate itself or its issuer name and serial number. This is
'openssl cmp -cmd rr -csr <file>' on the command line, or
OSSL_CMP_exec_RR_ses() with the certificate supplied via
OSSL_CMP_CTX_set1_p10CSR() through the API.
A CSR does not contain the issuer name and serial number of the certificate,
so the client does not send them. A server may optionally name the
certificate it revoked in its response, and the client then compares that
name against what it sent. Having sent neither an issuer name nor a serial
number, it has nothing to compare against, and a server returning a specially
crafted name causes the client to read from a NULL pointer and crash.
The revocation response is checked for valid message protection before
the affected code is reached, so an attacker must be a malicious or
compromised CMP server, or a man-in-the-middle in possession of the
secret used for message protection. Clients that identify the certificate
to be revoked by a certificate or by issuer and serial number rather
than by a PKCS#10 CSR are not affected.
FIPS impact: no
No FIPS modules are affected by this issue, as the CMP protocol
implementation is outside the OpenSSL FIPS module boundary. |
| Issue summary: OpenSSL QUIC stack does not enforce connection
level flow control for streams. Remote peers may send more bytes
as long as they fit within the stream flow control limits.
Impact summary: A malicious remote peer may exploit the lack of connection
flow control for streams to make the QUIC stack receive ~100MB of memory
instead of 768 KiB (default flow control window size).
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The local QUIC stack advertises two flow control limits
to its remote peer: stream flow control limit and connection flow
control limit. The remote peer must follow both limits when transmitting
stream data.
Whenever the local QUIC stack receives a stream frame, it validates
that the size of the received stream frame stays within flow control limits.
If either limit is exceeded (stream level or connection level), then
the QUIC stack must close the connection with a flow control error.
The vulnerable OpenSSL QUIC stack enforces the stream-level but not
the connection-level limit. To exploit the issue, three conditions must be met:
- the remote peer opens several streams
- each stream must stay within the stream-level flow control limit
- there must be no zero-offset byte sent on any of the streams
(to prevent the vulnerable QUIC stack from consuming data).
By meeting the conditions above, the remote peer may make the local stack
allocate 2 x MAX_STREAMS x (stream flow control limit) bytes
of memory. MAX_STREAMS defaults to 100, and the limit applies to both
bidirectional and unidirectional streams, making it 200 in total. The default
flow control window for a stream is 512kB. The remote peer may
force the vulnerable QUIC stack to allocate 100MB of heap per connection.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: A non-constant-time optimized implementation of scalar
point multiplication is used for SM2 private key operations on ARM64 and
RISC-V platforms.
Impact summary: An attacker able to measure the time taken by, or to observe
the cache-line access pattern of SM2 signing or decryption on an affected
platform can learn information about the secret scalar.
CWE: CWE-208: Observable Timing Discrepancy
Description: On ARM64 and RISC-V processors, the SM2 curve uses an optimized
scalar multiplication implementation whose conditional branches and table
look ups are chosen according to the bits of the secret scalar. The execution
time and the cache-access pattern therefore depend on the long-term private
key (during SM2 decryption) or the per-signature nonce (during SM2 signature
generation), forming a timing and cache side-channel.
FIPS Impact: no
SM2 is not a FIPS algorithm and the optimized SM2 implementation is not part
of the FIPS module.
OpenSSL 4.0, 3.6, 3.5 and 3.4 are vulnerable to this issue on AArch64 and
RISC-V.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.5.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.9.
OpenSSL 3.4 users should upgrade to OpenSSL 3.4.8.
This issue was reported on 2 May 2026 by Abhinav Agarwal.
It was independently reported on 6 June 2026 by Feng Xue.
The fix was developed by Igor Ustinov.
-- cut (non-publishing metadata for internal use) --
Reported by: Abhinav Agarwal, Feng Xue
Fixed by: Igor Ustinov |
| Issue summary: The generic elliptic-curve scalar multiplication used for
ECDSA and SM2 signature operations with curves that do not have a dedicated
implementation leaks information about the secret nonce through timing.
Impact summary: An attacker able to measure signing times may learn
information about the per-signature secret nonce, which over many signatures
can, via a lattice / Hidden Number Problem attack, lead to recovery of the
private key.
CWE: CWE-208: Observable Timing Discrepancy
Description: The generic elliptic-curve scalar multiplication used for
curves that do not have a dedicated constant-time implementation pads the
secret scalar with non-constant-time BIGNUM operations, so the time taken
depends on the value of the secret scalar derived from the ECDSA and SM2 nonce.
The leak is very small; observing it requires a large number of
measurements. The effect is largest for curves whose group order lies
on a machine-word boundary, such as brainpoolP384r1.
Applications using ECDSA signing over the Brainpool and other generic prime
curves, and SM2 signing on platforms that use the generic implementation,
are vulnerable to this issue.
The NIST curves P-256, P-384 and P-521 use dedicated constant-time
implementations and are not affected.
FIPS Impact: no
The FIPS modules are not affected: the approved NIST curves used in the FIPS
provider have dedicated constant-time implementations and do not use the
affected code path. |
| Issue summary: The first concurrent use of the same X.509 certificate by
several threads may cause its cached extension data to be freed while
another thread is still using it.
Impact summary: A remote, unauthenticated peer could crash a multi-threaded
TLS client, or a multi-threaded TLS server that requests client
certificates, if the first certificate chains built to the same trusted CA
certificate are built by several connections at the same time. This is a
use-after-free read, which is likely to crash the process, resulting in a
Denial of Service.
CWE: CWE-416: Use After Free
Description: OpenSSL caches the decoded values of a certificate's X.509v3
extensions inside the X509 object the first time they are needed. In
OpenSSL 4.0 this cache is built in two phases: the extension values are
computed while holding a read lock on the certificate, and the results are
then installed into the certificate under a write lock. Because a read lock
does not exclude other readers, several threads can compute the cache for
the same certificate at the same time. Each thread that subsequently
acquires the write lock installs its own results and frees the values
installed by the thread before it, even though that earlier thread has
already marked the cache as complete and may have returned pointers into it
to its caller. A caller still using those pointers then reads freed memory.
Any certificate shared between threads is exposed the first time its
extensions are decoded. In TLS the certificates at risk are the trusted CA
certificates supplied for chain verification, by whatever means, since these
are shared by every connection and their extensions are decoded and cached
the first time a chain is built to them. Certificates sent by the peer are
decoded separately for each connection and are not shared, so they are not
affected. In a TLS client verifying server certificates, or a TLS server
that requests and verifies client certificates, the use-after-free could
only occur if the first chains built to the same trusted CA are built by
several connections at the same time.
FIPS impact: no
The FIPS module is not affected as X.509 certificate handling is outside
of the OpenSSL FIPS module boundary.
OpenSSL 4.0 is vulnerable to this issue.
OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and
independently in a public report on 31 August 2026 by aydinmercan.
The fix has been developed by Bob Beck.
-- cut (non-publishing metadata for internal use) --
Reported by: Tim Becker (Xint.io), aydinmercan
Fixed by: Bob Beck |
| Issue summary: A TLS server that calls SSL_set_SSL_CTX() to switch a
connection to a different SSL_CTX part way through a handshake may access
memory beyond the end of an internal array if the replacement context knows
about more provider signature algorithms than the context the connection was
created from. Applications which never call SSL_set_SSL_CTX() are not
affected.
Impact summary: A remote peer may be able to cause a small out-of-bounds
read, and in some circumstances a fixed-value out-of-bounds write, on the
server heap. This may lead to a Denial of Service.
CWE: CWE-787: Out-of-bounds Write
Description: A TLS connection records how many certificate slots it has
when it is created, taken from the SSL_CTX that created it: the built-in
certificate types plus one slot for each provider TLS-SIGALG entry that
context was aware of. That count sizes an internal array of per-slot
certificate validity flags.
An application may replace a connection's SSL_CTX part way through the
handshake by calling SSL_set_SSL_CTX(), most commonly from a servername
callback in order to serve a different virtual host. Doing so did not
refresh the recorded count. A provider signature algorithm's slot index is
its position in the list of whichever context resolves it, so if the
replacement context is aware of more of them than the original, an
algorithm offered by the peer can resolve to an index beyond the end of the
array. Processing the peer's signature algorithms then reads one four byte
word past the end for each such algorithm and, where the word read is zero,
writes a fixed value over it. A peer offering many of them can corrupt heap
metadata and abort the process.
Only provider signature algorithms which occupy one of the excess slots,
and which the server also has configured, have this effect. Codepoints the
replacement context does not recognise are discarded without being resolved
to a slot, and provider signature algorithms are usable only from TLS 1.3.
The two contexts must therefore be aware of different numbers of provider
signature algorithms, which requires separate library contexts, a provider
loaded between the two being created, or providers which differ in what
they advertise - in 4.0, for example, the default provider advertises SM2
where the FIPS provider does not. A deployment meeting the condition is
also unable to negotiate the affected algorithms with legitimate clients,
since the same stale count hides the corresponding certificates, so the
misconfiguration is likely to be noticed. For that reason, and because the
configuration is not the default, this issue has been assessed as Low
severity.
FIPS impact: no
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Improper removal of sensitive information before storage or transfer vulnerability in Wikimedia Foundation's Mediawiki - FlaggedRevs extension through 1.46.0. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Mediawiki - Cargo extension allows Reflected XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| The Viidure Android application embeds permanent, plaintext cloud storage credentials within its compiled code. These credentials provide full access to critical platform storage, including the ability to read, modify, or delete operational files such as firmware and application binaries. |
| The central cloud storage backend for the entire dashcam platform is misconfigured with public-read permissions, allowing unrestricted access to all stored objects. Because this bucket serves as shared storage for the platform, sensitive user records, live dashcam footage, application packages, and firmware files are exposed to anyone on the internet. |
| Apache Airflow's Teradata provider embedded cloud storage credentials directly into SQL statements. `S3ToTeradataOperator` and `AzureBlobStorageToTeradataOperator` interpolate the source bucket's credentials as plain string literals into the `CREATE MULTISET TABLE ... LOCATION` statement whenever the bucket is private and no `teradata_authorization_name` is configured — which is the default credential path for both operators. The statement is then logged and executed, so the credentials reach two places outside the operator's control.
The two operators expose different credentials through different channels, and deployments should check both. `S3ToTeradataOperator` takes its values from `s3_hook.get_credentials()`, which under an instance profile or IRSA returns runtime AWS credentials that were never registered with Airflow's secrets masker — and the STS session token is runtime-generated and therefore unmasked even when an AWS connection is configured. Those credentials appear **in the Airflow task log**, readable by any user with log-view permission on the Dag. `AzureBlobStorageToTeradataOperator` takes its storage account key from the connection, so the masker usually redacts the task-log copy; its exposure is the Teradata side. **Both** operators write the credentials into Teradata's DBQL query logs and live monitoring views, where Airflow's masking never applies and the values persist for that system's log retention period.
Affects deployments using either operator against a private bucket or container without a Teradata `AUTHORIZATION` object. Users are advised to upgrade to `apache-airflow-providers-teradata` `3.7.0` or later, which keeps the credential-bearing statement out of the Airflow task log. Upgrading does not remove the credentials from Teradata's query logs and monitoring views, which Airflow cannot redact: users should configure `teradata_authorization_name` with a Teradata `AUTHORIZATION` object so that credentials are never inlined, and should rotate any credentials previously used through the inline path. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Mediawiki - Cargo extension allows Stored XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| Dockhand before 1.0.36 contains an open redirect vulnerability in the OIDC initiation endpoint that allows unauthenticated remote attackers to redirect authenticated users to attacker-controlled sites by injecting an unvalidated redirect query parameter. Attackers can craft a malicious link targeting the OIDC callback flow to capture authorization codes via the Referer header and conduct follow-up credential phishing against any Dockhand account after a legitimate login. |
| mcp-chrome-bridge through 1.0.31 contains an origin validation error in the native-server HTTP API that allows attackers to bypass CORS restrictions. Attackers can craft malicious web pages that make cross-origin requests to the local server and invoke browser automation tools including script execution, page content reading, and screenshot capture. |
| Apache XmlSchema doesn't limit how deeply schema imports and includes can be nested, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service.
Users are recommended to upgrade to version 2.3.3, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject legacy packet loads from callbacks
check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a
subprogram as an implicit return with R0 set to zero. It calls
prepare_func_exit() to explore this synthesized path.
When the load is reached directly from a synchronous callback,
prepare_func_exit() enforces the callback return contract and marks R0
precise. R0 is not derived from a real instruction on this path, so
precision backtracking reaches the callback call with R0 still requested
and triggers the "callback unexpected regs" verifier bug. A privileged
program loader can therefore cause a verifier warning and an -EFAULT
BPF_PROG_LOAD.
These legacy packet-load instructions are deprecated. Reject them from
callbacks rather than complicating their implicit-return model. Check all
active frames before constructing the implicit return so nested static
subprograms cannot hide the callback context.
Global functions are verified independently with a fresh frame zero, so
an active-frame check cannot identify a global function called from a
callback. Also check the complete subprogram call graph during stack-depth
validation and reject a function containing a legacy load when any caller
is a callback. This covers global and static descendants without making
has_ld_abs transitive, preserving its per-function BTF return-type check.
Ordinary uses outside callbacks remain supported. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_btf_find_by_name_kind() as sleepable
When bpf_btf_find_by_name_kind() finds a type in module BTF, it
returns a new BTF object fd through __btf_new_fd(). This reaches
anon_inode_getfd(), which can sleep while allocating or expanding the
current task fd table.
The helper prototype does not set might_sleep, so the verifier allows
the helper in non-sleepable contexts such as BPF timer callbacks. The
fd allocation can then sleep in softirq context and install the fd into
the interrupted task.
Mark the helper as sleepable. This preserves calls from the main body
of a sleepable syscall program while rejecting calls from its
non-sleepable regions. |
