| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pgAdmin 4 did not invalidate a user's existing sessions when their password changed, either through the user's own change password dialog or through an administrator resetting it in User Management. A session established before the change, for example on another device or by someone who had obtained the old password or a session cookie, therefore stayed logged in after the change, which is the step a user or administrator takes precisely to cut such access off. It remained usable until it expired.
The fix rotates the user's session identifier (fs_uniquifier) whenever the password is changed, so every other session of that user is logged out. The session that made the change is logged in again and keeps its database connections. Saved server passwords, including those for shared servers, are re-encrypted under the new key; any that cannot be decrypted are cleared and the user is told. If re-encryption fails, the sessions are still revoked and the saved passwords are cleared rather than the change failing.
This issue affects pgAdmin 4: before 9.19. |
| WebDyne versions from 2.014 before 3.022 for Perl issue session cookies without the Secure, HttpOnly and SameSite attributes.
WebDyne::Session sets its session cookie with only a name, value and path.
Browsers then send the session ID over plain HTTP and with cross-site requests, and expose it to page scripts. A network attacker or an injected script can steal the session, and another site can make requests that carry it. |
| Insufficient session expiration in Apache Wicket.
org.apache.wicket.protocol.ws.WebSocketSettings#newWebSocketRequest() wraps the WebSocket upgrade request in an org.apache.wicket.protocol.ws.api.ServletRequestCopy, which is kept for the life of the connection and used to build the request for every frame that arrives on it. Copying the request is deliberate and is documented as such, because the container recycles the upgrade request once the handshake is over. The container session is copied along with it, into an org.apache.wicket.protocol.ws.api.HttpSessionCopy holding the session attributes as they stood when the connection was opened. That second copy is not necessary, because a session, unlike a request, is not discarded at the end of a request. Every frame afterwards resolves its Wicket session through ISessionStore#lookup(), which reads it out of the copy, so the connection is detached from the live container session for as long as it stays open.
Ending the session through the container therefore does not end the connection. After an idle timeout, an HttpSession#invalidate() call made from a filter or from a security framework, a container-managed logout, or a session replacement, the connection goes on resolving the org.apache.wicket.Session instance that existed when it was opened, together with that session's attributes and, for applications built on wicket-auth-roles, the signed-in state held on that same instance, so an authorization decision taken inside a WebSocket callback is taken against an identity that has already been revoked. The copy is also what the connection writes through: a Session#invalidateNow() issued from inside a WebSocket callback invalidates the copy and leaves the container session valid, and session attributes set over the connection are written to the copy rather than to the session.
An application is affected where it uses Wicket's native WebSocket support on pages or shared resources that require an authenticated session, and where sessions are ended by the container rather than by Wicket. Session#invalidateNow(), and AuthenticatedWebSession#invalidate() and #signOut() which call it, remain effective for a WebSocketBehavior on a page: they clear the page manager, and the connection can then no longer resolve the page it was opened for. A WebSocketResource is not limited in that way, because a frame naming a resource is served against a throwaway page and never consults the page manager, so such a connection outlives Wicket's own sign-out as well. Some containers close WebSocket connections themselves when the HTTP session they were opened under is destroyed, in which case the connection ends regardless; that is a property of the container rather than of Wicket. Applications that do not use the native WebSocket support are not affected.
This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Older, unsupported releases from 6.0.0 onwards are also affected. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. |
| A flaw was found in QEMU. An assertion failure was present in the usb_ep_get() function in hw/net/core.c when trying to get the USB endpoint from a USB device. This flaw may allow a malicious unprivileged guest user to crash the QEMU process on the host and cause a denial of service condition. |
| Jenkins 2.587 and earlier, LTS 2.580.1 and earlier allows requests authenticated using HTTP Basic authentication, including with an API token, to obtain a "remember me" cookie, allowing attackers who have obtained a user's API token to retain access to Jenkins using a "remember me" cookie after the API token is revoked or expires. |
| A flaw was found in nfs-utils. The fsidd daemon improperly handles input received over its local domain socket by relying on program assertions to verify command arguments. A local user can exploit this vulnerability by sending a malformed request lacking the required arguments to trigger an assertion failure. This causes the daemon to crash, resulting in a Denial of Service (DoS) for filesystem identifier lookup services until restarted. |
| A flaw was found in libsoup. When a client sends an HTTP/2 request body from a non-pollable input stream, the library can buffer more data than the current flow-control window later allows. A malicious HTTP/2 server can shrink SETTINGS_INITIAL_WINDOW_SIZE while that buffered read is still in progress. The client then copies the full buffer into a smaller DATA callback without a runtime bounds check, which can abort the process or fail the HTTP/2 session. |
| A symlink-following flaw was found in libvirt's qemuTPMEmulatorPrepareHost() function. The function uses a path-based chown() on the swtpm logfile without checking for symbolic links. A local attacker with access to the swtpm account can replace the logfile with a symlink, causing libvirtd (running as root) to transfer ownership of an arbitrary file to the swtpm user. |
| Incus is a system container and virtual machine manager. Prior to version 7.2.0, a specially crafted image can be used to read or create/write arbitrary files on the host; possibly leading to arbitrary command execution. Version 7.2.0 fixes the issue. |
| Incus is a system container and virtual machine manager. Prior to version 7.2.0, a specially crafted image or instance backup can be used to read or create/write arbitrary files on the host; possibly leading to arbitrary command execution. Version 7.2.0 patches the issue. |
| Szafir and Szafir Weryfikująca are vulnerable to XML External Entity (XXE) injection. When a user signs or verify a crafted XML file containing a `DOCTYPE` with an external DTD reference, the parser processes external entities, allowing an attacker to read arbitrary files from the victim's filesystem.
This issue was fixed in Szafir version 2.0 build 708. Szafir Weryfikująca is no longer supported (End of Life) and has not been fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
__arm_lpae_unmap() returns size_t but was returning -ENOENT (negative
error code) when encountering an unmapped PTE. Since size_t is unsigned,
-ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE
on 64-bit systems).
This corrupted value propagates through the call chain:
__arm_lpae_unmap() returns -ENOENT as size_t
-> arm_lpae_unmap_pages() returns it
-> __iommu_unmap() adds it to iova address
-> iommu_pgsize() triggers BUG_ON due to corrupted iova
This can cause IOVA address overflow in __iommu_unmap() loop and
trigger BUG_ON in iommu_pgsize() from invalid address alignment.
Fix by returning 0 instead of -ENOENT. The WARN_ON already signals
the error condition, and returning 0 (meaning "nothing unmapped")
is the correct semantic for size_t return type. This matches the
behavior of other io-pgtable implementations (io-pgtable-arm-v7s,
io-pgtable-dart) which return 0 on error conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr
A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data()
when an inode had the INLINE_DATA_FL flag set but was missing the
system.data extended attribute.
Since this can happen due to a maiciouly fuzzed file system, we
shouldn't BUG, but rather, report it as a corrupted file system.
Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii
ext4_create_inline_data() and ext4_inline_data_truncate(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix WARN_ON for monitor mode on some devices
On devices without WANT_MONITOR_VIF (and probably without
channel context support) we get a WARN_ON for changing the
per-link setting of a monitor interface.
Since we already skip AP_VLAN interfaces and MONITOR with
WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update
the settings, catch this in the link change code instead
of the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix bug due to prealloc collision
When userspace is using AF_RXRPC to provide a server, it has to preallocate
incoming calls and assign to them call IDs that will be used to thread
related recvmsg() and sendmsg() together. The preallocated call IDs will
automatically be attached to calls as they come in until the pool is empty.
To the kernel, the call IDs are just arbitrary numbers, but userspace can
use the call ID to hold a pointer to prepared structs. In any case, the
user isn't permitted to create two calls with the same call ID (call IDs
become available again when the call ends) and EBADSLT should result from
sendmsg() if an attempt is made to preallocate a call with an in-use call
ID.
However, the cleanup in the error handling will trigger both assertions in
rxrpc_cleanup_call() because the call isn't marked complete and isn't
marked as having been released.
Fix this by setting the call state in rxrpc_service_prealloc_one() and then
marking it as being released before calling the cleanup function. |
| Incus is a system container and virtual machine manager. Prior to version 7.2.0, the `record-output` parameter of the `/instances/$name/exec` endpoint stores the output of the command in the `exec-output` directory of the instance. If `exec-output` is a symlink, file named `exec_UUID.stdout` and `exec_UUID.stderr` can be written to an arbitrary location where the `.stdout` file will contain arbitrary content. This behavior can be abused for arbitrary command execution. Version 7.2.0 contains a patch. |
| A denial of service vulnerability was found in GStreamer's AV1 codec parser in gst-plugins-bad. The gst_av1_parser_parse_tile_list_obu() function passes a byte count to a bit-reader API that expects a bit count, causing parser desynchronization. A remote attacker could trick a user into opening a specially crafted AV1 media file, triggering an assertion abort and causing the application to crash. |
