| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
|
A hard-coded AES key vulnerability was reported in the Motorola GuideMe application, along with a lack of URI sanitation, could allow for a local attacker to read arbitrary files.
|
| Arris VIP1113 devices through 2025-05-30 with KreaTV SDK have a firmware decryption key of cd1c2d78f2cba1f73ca7e697b4a485f49a8a7d0c8b0fdc9f51ced50f2530668a. |
| Use of Hard-coded Cryptographic Key vulnerability in ABB RMC-100, ABB RMC-100 LITE.
When the REST interface is enabled by the user, and an attacker gains access to
source code and control network, the attacker can bypass the REST interface authentication and gain access to MQTT configuration data.
This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| A vulnerability was detected in PandaXGO PandaX up to fb8ff40f7ce5dfebdf66306c6d85625061faf7e5. This affects an unknown function of the file config.yml of the component JWT Secret Handler. The manipulation of the argument key results in use of hard-coded cryptographic key
. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| itech iLabClient 3.7.1 relies on the hard-coded YngAYdgAE/kKZYu2F2wm6w== key (found in iLabClient.jar) for local users to read or write to the database. |
| The NXP Data Co-Processor (DCP) is a built-in hardware module for specific NXP SoCs¹ that implements a dedicated AES cryptographic engine for encryption/decryption operations. The dcp_tool reference implementation included in the repository selected the test key, regardless of its `-t` argument. This issue has been patched in commit 26a7. |
| Use of hard-coded cryptographic key issue exists in AIPHONE IX SYSTEM, IXG SYSTEM, and System Support Software. A network-adjacent unauthenticated attacker may log in to SFTP service and obtain and/or manipulate unauthorized files. |
| A low privileged local attacker can abuse the affected service by using a hardcoded cryptographic key. |
| Successful exploitation of this vulnerability could allow an attacker (who needs to have Admin access privileges) to read hardcoded AES passphrase, which may be used for decryption of certain data within backup files of 2N Access Commander version 1.14 and older.
2N has released an updated version 3.3 of 2N Access Commander, where this vulnerability is mitigated. It is recommended that all customers update 2N Access Commander to the latest version. |
| A vulnerability has been found in MartialBE one-hub up to 0.14.27. This vulnerability affects unknown code of the file docker-compose.yml. The manipulation of the argument SESSION_SECRET leads to use of hard-coded cryptographic key
. The attack may be initiated remotely. The complexity of an attack is rather high. It is stated that the exploitability is difficult. The exploit has been disclosed to the public and may be used. It is recommended to change the configuration settings. The code maintainer recommends (translated from Chinese): "The default docker-compose example file is not recommended for production use. If you intend to use it in production, please carefully check and modify every configuration and environment variable yourself!" |
| "FOD" App uses hard-coded cryptographic keys, which may allow a local unauthenticated attacker to retrieve the cryptographic keys. |
| A vulnerability was determined in opsre go-ldap-admin up to 20251011. This issue affects some unknown processing of the file docs/docker-compose/docker-compose.yaml of the component JWT Handler. Executing manipulation of the argument secret key can lead to use of hard-coded cryptographic key
. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitability is assessed as difficult. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was found in gooaclok819 sublinkX up to 1.8. It has been declared as problematic. This vulnerability affects unknown code of the file middlewares/jwt.go. The manipulation with the input sublink leads to use of hard-coded cryptographic key
. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.9 is able to address this issue. The patch is identified as 778d26aef723daa58df98c8060c43f5bf5d1b10b. It is recommended to upgrade the affected component. |
| Use of Hard-coded Cryptographic Key vulnerability in ABB RMC-100, ABB RMC-100 LITE.
An attacker can gain access to salted information to decrypt MQTT information.
This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| nvOC through 3.2 ships with SSH host keys baked into the installation image, which allows man-in-the-middle attacks and makes identification of all public IPv4 nodes trivial with Shodan.io. NOTE: as of 2019-12-01, the vendor indicated plans to fix this in the next image build. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). The affected systems use symmetric cryptography with a hard-coded key to protect the communication between client and server. This could allow an unauthenticated remote attacker to compromise confidentiality and integrity of the communication and, subsequently, availability of the system.
A successful exploit requires the attacker to gain knowledge of the hard-coded key and to be able to intercept the communication between client and server on the network. |
| Unitree Go2, G1, H1, and B2 devices through 2025-09-20 decrypt BLE packet data by using the df98b715d5c6ed2b25817b6f2554124a key and the 2841ae97419c2973296a0d4bdfe19a4f IV. |
| SimpleMiningOS through v1259 ships with SSH host keys baked into the installation image, which allows man-in-the-middle attacks and makes identification of all public IPv4 nodes trivial with Shodan.io. NOTE: the vendor indicated that they have no plans to fix this, and discourage deployment using public IPv4. |
| Certain Anpviz products contain a hardcoded cryptographic key stored in the firmware of the device. This affects IPC-D250, IPC-D260, IPC-B850, IPC-D850, IPC-D350, IPC-D3150, IPC-D4250, IPC-D380, IPC-D880, IPC-D280, IPC-D3180, MC800N, YM500L, YM800N_N2, YMF50B, YM800SV2, YM500L8, and YM200E10 firmware v3.2.2.2 and lower and possibly more vendors/models of IP camera. |
| A weakness has been identified in DJI Mavic Spark, Mavic Air and Mavic Mini 01.00.0500. Affected is an unknown function of the component Telemetry Channel. Executing manipulation can lead to use of hard-coded cryptographic key
. The attacker needs to be present on the local network. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer. |
