| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Music Player Daemon (MPD) before version 0.24.11 contains a stack buffer overflow vulnerability in the pcm_unpack_24be function in src/pcm/Pack.cxx that allows unauthenticated attackers to corrupt stack memory by triggering an off-by-one write in the PCM decoder plugin. Attackers can issue two MPD commands referencing a malicious HTTP audio source to cause the unpack loop to write 1366 entries into a 1365-entry buffer, overwriting four bytes past the array boundary with three attacker-controlled bytes from an HTTP response body, resulting in daemon termination or potential code execution. |
| In NLnet Labs Unbound 1.13.2 up to and including 1.25.1, stub or forward zones where the name is below an intermediate labed below a DNSSEC signed zone could be shadowed by the intermediate label's secure NXDOMAIN answer from the parent. This is caused by an off-by-one error in 'harden-below-nxdomain' logic; enabled by default. It effectively bypasses the configuration and the configured stub/forward zone is never contacted. 'harden-below-nxdomain' does an upward DNS cache walk together with a delegation point guard that does not allow NXDOMAIN synthesis above stub/forward zones. The guard tests the domain name but before stripping a label. This results in an iteration where the domain name equals the configured stub/forward zone apex that passes the guard, strips one more label, and probes the cache at the apex's immediate public parent. If that parent has a cached DNSSEC-secure NXDOMAIN, which it will for any private namespace nested two or more labels under a signed public name, the walk returns it and the configured stub/forward upstream is never contacted. This can only be triggered by the query for the intermediate label (between the stub/forward apex and the DNSSEC parent zone). |
| An invalidly formatted IKEv2 fragment causes the Libreswan pluto daemon to crash and restart. Continued exploitation would cause a denial of service. The function reassemble_v2_incoming_fragments() would ignore unknown outer payloads but still store these in a fixed size array msg_digest.digest[PAYLIMIT]. An off-by-one error in the assertion PASSERT(logger, md->digest_roof < elemsof(md->digest)) causes the daemon to abort. No remote code execution is possible. Any configuration that allows IKEv2 connections that do not set fragmentation=no are vulnerable. IKEv1 is not affected. |
| UltraVNC repeater through 1.8.2.2 contains an off-by-one error in the Base64 decode helper used for HTTP Basic authentication. In repeater/webgui/webutils.c:817, the wi_uudecode() function checks whether the input length exceeds the output buffer with a strict greater-than comparison (>), while the correct check should be greater-than-or-equal (>=). When strlen(authdata) equals sizeof(decode), the decoded output length (approximately 3/4 of input) does not overflow the buffer in current practice because the outer HTTP request bounds constrain the Authorization header. However, the defective check leaves a latent off-by-one condition that could become exploitable if the buffering constraints change. The current risk is limited to a one-byte write at the boundary of a 1024-byte stack buffer under constrained conditions. |
| UltraVNC viewer through 1.8.2.2 contains an off-by-one stack buffer overflow in the RFB ServerInit message handler. In vncviewer/ClientConnection.cpp, when the server-supplied nameLength equals exactly 2024 the code declares a 2024-byte stack buffer _dn[2024] and calls ReadString(_dn, 2024). ReadString writes the NUL terminator at buf[length], i.e., _dn[2024], one byte past the end of the stack buffer. A malicious VNC server can trigger this condition by advertising a desktop name of length 2024 in its ServerInit message. On release builds without stack canaries the single-byte NUL overwrite adjacent stack data. On builds with /GS stack protection the canary is corrupted and the process terminates, resulting in denial of service. User interaction (connecting the viewer to the malicious server) is required. |
| In hostapd before 2.12, a missing bounds check in AP-mode Wi-Fi 7 (IEEE 802.11be) Multi-Link Operation (MLO) association request processing allows an unauthenticated attacker within wireless range to send a crafted management frame containing a malformed Multi-Link Element or Per-STA Profile subelement. In hostapd_process_ml_assoc_req() in src/ap/ieee802_11_eht.c, the received link_id field can be parsed as value 15, but the corresponding links[] storage only has valid entries for lower link IDs (0 through 14). This causes an out-of-bounds write / small memory corruption during association processing before the 4-way handshake. The attack does not require network credentials, prior authentication, or user interaction. The confirmed practical impact is denial of service through hostapd process termination. This affects hostapd v2.11 and newer development snapshots before v2.12 when built with CONFIG_IEEE80211BE enabled. The issue is fixed in hostapd v2.12 and the upstream 2026-1 fixes. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fix off-by-one in check_imm signed range check
check_imm(bits, imm) is used in the arm64 BPF JIT to verify that
a branch displacement (in arm64 instruction units) fits into the
signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding
before it is handed to the encoder. The macro currently tests for
(imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits
values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A
signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check
admits one extra bit of range on each side.
In particular, for check_imm19(), values in [2^18, 2^19) slip past
the check but do not fit into the 19-bit signed imm19 field of
B.cond. aarch64_insn_encode_immediate() then masks the raw value
into the 19-bit field, setting bit 18 (the sign bit) and flipping
a forward branch into a backward one. Same class of issue exists
for check_imm26() and the B/BL encoding. Shift by (bits - 1)
instead of bits so the actual signed N-bit range is enforced. |
| CANBoat through 6.22, fixed in commit a5a22b7, contains an off-by-one global buffer overflow in the searchForPgn() function in analyzer/pgn.c that allows remote attackers to crash the application. Attackers can deliver a crafted NMEA-2000 message with an out-of-range PGN value over CAN bus or N2K-over-IP to trigger an out-of-bounds array access and denial of service. |
| RTKLIB through 2.4.3 contains an off-by-one out-of-bounds read vulnerability in the decode_ssr3 function at src/rtcm3.c:1446 that allows remote attackers to trigger a global buffer overflow via crafted RTCM3 SSR messages with attacker-controlled signal mode fields. Remote attackers can exploit this vulnerability by sending malicious SSR correction streams over NTRIP or serial connections to cause denial of service or crash RTKLIB rovers and CORS servers. |
| LibreOffice Calc compiles cell formulas when opening a spreadsheet. A heap buffer overflow existed when compiling a very long formula made up of many opening tokens. The array that tracks nesting depth was allocated one element too small for that worst case, so such a formula wrote one element past its end. In fixed versions the array is sized to hold the largest possible nesting. |
| A heap-based buffer overflow vulnerability exists in the Palette box parser functionality of Accusoft ImageGear 19.10. A specially-crafted file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| Moby is an open source container framework. Prior to version 29.3.1, a security vulnerability has been detected that allows plugins privilege validation to be bypassed during docker plugin install. Due to an error in the daemon's privilege comparison logic, the daemon may incorrectly accept a privilege set that differs from the one approved by the user. Plugins that request exactly one privilege are also affected, because no comparison is performed at all. This issue has been patched in version 29.3.1. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rkcif: fix off by one bugs
Change these comparisons from > vs >= to avoid accessing one element
beyond the end of the arrays.
While at it, use ARRAY_SIZE instead of the _MAX enum values.
[fix cosmetic issues] |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, an incorrect check in the JP2 will result in an heap buffer over-write of a single byte when specifying certain options. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, an off by one in the meta encoder could result in an out of bounds read of a single byte in the meta encoder. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| bit7z is a cross-platform C++ static library that allows the compression/extraction of archive files. Prior to version 4.0.12, a one-byte off-by-one error in SafeOutPathBuilder::restoreSymlink() allows an attacker to craft a .7z archive that, when extracted with bit7z on any non-Windows platform, creates a symlink escaping the intended output directory. Subsequent archive entries extracted through this symlink write arbitrary files outside the extraction directory with the permissions of the extracting process. This issue has been patched in version 4.0.12. |
| bzip2 contains an off‑by‑one error in the bzip2recover utility. When processing a specially crafted file, the application performs an out‑of‑bounds write to a global buffer, resulting in memory corruption and a crash (denial of service).
This issue was fixed in bzip2 patch 35d122a3df8b0cc4082a4d89fdc6ee99f375fe67 |
| An off-by-one error (CWE-193) in the ConsumeUnit16Array and ConsumeUnit64Array functions in Velocidex Velociraptor before version 0.76.5 on Windows and Linux allows a local attacker to cause a Denial of Service (DoS) via a process crash by providing a specially crafted .evtx file to the parse_evtx VQL plugin. |
| FastNetMon Community Edition through 1.2.9 contains an off-by-one heap-based buffer overflow in the dynamic_binary_buffer_t class (src/dynamic_binary_buffer.hpp). Five methods (append_dynamic_buffer, append_data_as_pointer, append_data_as_object_ptr, memcpy_from_ptr, memcpy_from_object_ptr) use an incorrect bounds check of the form 'if (offset + length > maximum_internal_storage_size + 1)' instead of the correct 'if (offset + length > maximum_internal_storage_size)'. This allows writing exactly one byte past the end of the heap-allocated buffer. The class is used pervasively in BGP message encoding/decoding, NetFlow template processing, and Flow Spec NLRI construction. An attacker who can send network traffic (NetFlow, sFlow, IPFIX, or BGP) to a FastNetMon instance can trigger this overflow, potentially achieving arbitrary code execution by corrupting heap metadata. Notably, the append_byte() method uses the correct bounds check, confirming the inconsistency. |
| Rsync versions before 3.4.3 contain an off-by-one out-of-bounds stack write vulnerability in the establish_proxy_connection() function in socket.c that allows network attackers to corrupt stack memory by sending a malformed HTTP proxy response. Attackers can exploit this by positioning themselves between the client and proxy or controlling the proxy server to send a response line of 1023 or more bytes without a newline terminator, causing a null byte to be written to an out-of-bounds stack address when the RSYNC_PROXY environment variable is set. |
