| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: riscv-sbi-mpxy: validate RPMI notification lengths
The SBI return value controls how many bytes are copied from shared
memory into the RPMI notification buffer. It is not validated against
the negotiated shared-memory size before that copy. The event walker
also uses a reversed loop condition and can inspect a short event record.
Validate the complete notification length before copying it, iterate only
while a full event header remains, and stop when a declared event payload
extends beyond the copied notification data. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative optlen in cgroup getsockopt hook
A cgroup getsockopt BPF program can shrink ctx->optlen after the
kernel getsockopt handler has run. The kernel-buffer variant, used by
TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original
length.
If BPF writes a negative optlen, that value is accepted and propagated
back to the TCP getsockopt code. It can then be passed to
copy_to_sockptr() as a size_t and trigger the hardened usercopy
bytes > INT_MAX warning.
Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(),
matching the lower-bound validation already present in the sockptr-based
getsockopt hook. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID
tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID
taken from master->streams[0], and only warns when the device does not have
exactly one stream. A device with several streams gets only its first one
mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB
entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out
of bounds.
Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: reject PDUs declaring more data than was received
isert_recv_done() hands each received PDU to the opcode handlers without
ever looking at wc->byte_len, the number of bytes the HCA actually placed
in the receive descriptor. The handlers then copy that many bytes - the
data-segment length the initiator declared in the BHS
(ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) -
out of the fixed-size descriptor:
isert_handle_iscsi_dataout():
sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc),
unsol_data_len);
isert_handle_scsi_cmd():
sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents,
isert_get_data(rx_desc), imm_data_len);
Because the declared length is never checked against wc->byte_len, an
initiator can declare a data segment larger than the bytes it actually
sent (and larger than the descriptor) and cause an out-of-bounds read of
the receive buffer.
Nothing upstream of isert closes this door:
- __iscsit_check_dataout_hdr() bounds the inbound payload against
conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter,
used here for the inbound check.
- iscsi_set_connection_parameters() sets
ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength;
and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in
iscsi_check_acceptor_state(), so the value the initiator declares is
adopted verbatim (type range 512..16777215). The initiator effectively
raises its own ceiling.
- isert never clamps the negotiated value to its own fixed receive
descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and
the descriptor size are unrelated.
The imm_data_len == data_len path is more than an over-read: it aliases
the receive descriptor via sg_set_buf() and passes it to the backend as
the data source for the SCSI WRITE, so an over-declared length causes heap
contents past the descriptor to be written through the backend to the
backing store. The backend is the victim of the oversized scatterlist
isert hands it, not the cause; no read-back of the written bytes was
demonstrated.
Trigger: after login completes (full feature phase), an initiator that has
declared a large TargetRecvDataSegmentLength and a FirstBurstLength that
permits unsolicited/immediate data sends a PDU whose declared data-segment
length exceeds what was received. With KASAN:
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0
Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25
Workqueue: ib-comp-wq ib_cq_poll_work
Call Trace:
sg_copy_buffer+0x150/0x1c0
isert_recv_done+0xba6/0x2390
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout()
(ib_isert.c:1160), inlined through isert_rx_opcode().
Validate wc->byte_len against the framing in isert_recv_done() before the
PDU reaches any handler, and reinstate the connection if it is short.
Because the test compares without subtracting the header length, it also
rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise
be parsed out of stale descriptor contents. The login handler rejects PDUs
shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login
PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared
length either; that is fixed in the next patch. The data handlers had no
length check at all.
isert reads the data segment from a fixed offset: isert_get_data()
returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for
an AHS. The bytes the handlers touch are therefore exactly
[ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum
against wc->byte_len bounds precisely the region that is read. An AHS
term would only make the test stricter without bounding anything furth
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent out-of-bounds read in super root block parsing
super-root inode metadata size is trusted before nilfs_read_inode_common().
Reject super-root inode sizes whose computed on-disk footprint exceeds the
filesystem block size. This prevents malformed filesystem images from
making nilfs_read_inode_common() read past the end of the super-root block.
[ryusuke: clarify the commit title] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: avoid OOB read of build info string
The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read
Build Information) and hands the response to bt_dev_info() and
hci_set_fw_info() as a "%s" string starting at skb->data + 1, without
checking the length. A backend that answers with status only leaves that
pointer past the end of the received data, so the walk reads adjacent
slab memory until it meets a NUL. Those bytes reach the kernel log and
the firmware-info debugfs file.
To fix this, print the string with a bounded "%.*s" limited to
skb->len - 1. A short or unterminated response then prints as much as
arrived instead of failing setup.
This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of
revision string in bpa10x_setup()"), which fixed the identical pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count
cros_typec_register_partner_pdos() copies the partner PDOs from the EC
TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array.
memcpy(caps_desc.pdo, resp->source_cap_pdos,
sizeof(u32) * resp->source_cap_count);
...
memcpy(caps_desc.pdo, resp->sink_cap_pdos,
sizeof(u32) * resp->sink_cap_count);
PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields
from the EC. The only check is that they are not both zero. If either is
larger than 7, the memcpy writes past the end of the array on the stack.
A count of 255 overflows it by about 1 KB. The EC source arrays are only
seven entries wide. A larger count reads past them too.
The ChromeOS EC firmware caps these counts today, so a compliant setup
does not hit this. The kernel should still validate these values rather
than trust them.
Validate the counts in cros_typec_register_partner_pdos() next to the
memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS.
The rest of cros_typec_handle_status() still runs so events are handled
and cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread name.
A corrupted image can therefore provide an oversized thread name length
and make hfs_bnode_read() write past the catalog search-key allocation.
Read the CNID record through hfsplus_brec_read_cat(), which bounds the
record read to sizeof(hfsplus_cat_entry) and verifies that a thread
record's size exactly matches nodeName.length. Together, these checks
ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread
records before building the delete key from the validated thread name.
Share the thread-record-type helper between hfsplus_find_cat() and
hfsplus_delete_cat(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uac: validate rate list length before storing
UAC1 and UAC2 configfs rate-list attributes parse a comma-separated
list of sampling rates and store each parsed value in fixed-size arrays.
The arrays have UAC_MAX_RATES entries, but the store paths do not check
that the input contains at most that many tokens before writing through
opts->name##s[i++].
Writing more than ten rates therefore writes past the end of the
p_srates[] or c_srates[] array in struct f_uac1_opts or struct
f_uac2_opts.
With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the
UAC1 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac1.c:1669:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac1_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
The same reproducer against the UAC2 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac2.c:2087:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac2_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
Reject additional tokens once UAC_MAX_RATES entries have been parsed.
Also keep the original kstrdup() pointer for kfree(), because strsep()
advances the parsing cursor. Freeing the advanced cursor leaks the
original buffer on successful parses and can free an interior pointer on
some error paths. |
| A vulnerability in the RADIUS feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by sending a crafted RADIUS request directly to an affected device. A successful exploit could allow the attacker to cause the ISE node to become unavailable. For single node deployments in that condition, endpoints that have not already authenticated would be unable to access the network until the node comes back up on its own. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix out-of-bounds write when probed more than once
imx6_soc_volt is allocated fresh on every probe, sized to the number of
ARM OPPs:
imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
GFP_KERNEL);
but it is filled through soc_opp_count, which has static storage and is
never reset. A second bind after an unbind keeps indexing from where the
first one stopped, and writes past the end of the new array.
Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN:
BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34
Write of size 4 at addr c5e90480 by task binder/73
imx6q_cpufreq_probe from platform_probe+0x88/0xe4
platform_probe from really_probe+0x108/0x384
bind_store from kernfs_fop_write_iter+0x1b4/0x28c
The write lands one u32 past the end of the allocation.
soc_opp_count is only read a few lines below the loop that fills it, so it
never needed static storage. Make it a local. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: coreboot: Validate table bounds
The existing coreboot_table_populate() bounds checks limit individual
entries to the mapped length. However, coreboot_table_probe() replaces
the platform resource length with header and table sizes supplied by
firmware before mapping the full table.
A malformed table can overflow the 32-bit size addition or advertise an
extent beyond the resource, causing the driver to map and parse memory
outside the resource. A resource shorter than the fixed header is also
mapped as though it contained a complete header.
Reject resources shorter than the fixed header. After validating the
signature, require a complete header, calculate the advertised extent
with overflow checking, and reject extents beyond the resource before
remapping the table. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: avoid userspace overflow on invalid optlen
nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so
the kernel always stores 4 bytes regardless of the caller-supplied
optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length
reported back to userspace; it does not constrain the store. A call with
optlen < 4 therefore writes past the user buffer, violating the
getsockopt(2) contract for all five supported optnames.
Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a
plain size comparison would promote a negative optlen to size_t and slip
past the check; an explicit 'len < 0' test is added first to catch
negative values before the size compare. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The
subsequent memcpy() destination advances by sizeof(full struct) per slot
via C pointer arithmetic, not by the clamped len. When firmware sends
short TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, so those bytes reach the target. SRP_AER_REQ behaves the same way
and also reads req->lun.
The leak is 8 bytes per response. max_ti_iu_len also decides which slab
cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and
the read is entirely outside it:
BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0
Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of
allocated 8-byte region [ffff888104714da0, ffff888104714da8)
Without KASAN the returned bytes are whatever is next in the slab. One
run returned ".strtab".
rsp->data[3] in srp_process_rsp() has the same problem: only
resp_data_len is checked before it is read.
Drop a request that is shorter than the structure being parsed, and
check byte_len before the tsk_mgmt read. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate external xattr entries when reading metadata
ocfs2_validate_xattr_block() checks the xattr block header before the
block reaches higher-level xattr users, but it does not verify that a
non-indexed block's xh_count and entry offsets fit inside the block.
Indexed buckets likewise reach list/get consumers after ECC without an
entry-bounds check.
Use the flat xattr entry validator for non-indexed external xattr blocks,
and use a bucket-specific validator for indexed buckets at metadata read
time. The bucket validator keeps the entry array bounded by the first
bucket block while checking name/value offsets against the bucket block
they target.
Reject corrupted external xattr metadata before listxattr() or getxattr()
can walk out-of-range entry arrays or name/value offsets.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190
Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_list_entries+0xd7/0x190
ocfs2_listxattr+0x3f6/0x610
listxattr+0x90/0xe0
path_listxattrat+0xed/0x220
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: reserve space for the CSA-abort countdown TLV
When a CSA countdown is active, mt7996_mcu_beacon_cntdwn() emits two
bss_bcn_cntdwn_tlv entries (the CSA countdown and the CCA-abort BCC), but
MT7996_BEACON_UPDATE_SIZE only reserved one. With MBSSID enabled and a
near-maximum beacon template the extra 8 bytes could push the offload
command past MT7996_MAX_BSS_OFFLOAD_SIZE and trigger skb_over_panic().
Reserve room for both countdown TLVs. |
