Export limit exceeded: 381685 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381685 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-70899 | 1 Oracle | 1 Hyperion Data Relationship Management | 2026-08-22 | 8.8 High |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Data Relationship Management. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-70903 | 1 Oracle | 1 Hyperion Data Relationship Management | 2026-08-22 | 8.7 High |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle Hyperion Data Relationship Management. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Hyperion Data Relationship Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 8.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:N). | ||||
| CVE-2026-70960 | 1 Oracle | 1 Hyperion Financial Management | 2026-08-22 | 7.6 High |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Hyperion Financial Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data as well as unauthorized update, insert or delete access to some of Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 7.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:L/A:N). | ||||
| CVE-2026-72341 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix publication race for priv->channel_stats[] mlx5e_channel_stats_alloc() publishes a new entry to priv->channel_stats[] and then increments priv->stats_nch as a publication token, but neither store carries any memory barrier: priv->channel_stats[ix] = kvzalloc_node(...); if (!priv->channel_stats[ix]) return -ENOMEM; priv->stats_nch++; Concurrent readers compute the loop bound from priv->stats_nch and then dereference priv->channel_stats[i] using plain accesses, e.g. for (i = 0; i < priv->stats_nch; i++) { struct mlx5e_channel_stats *cs = priv->channel_stats[i]; ... cs->rq.packets ... } On weakly-ordered architectures (ARM, PowerPC, RISC-V) the writes to channel_stats[ix] and stats_nch may become visible to other CPUs out of program order. A reader can observe stats_nch == N while still seeing channel_stats[N-1] == NULL, leading to a NULL pointer dereference in the channel_stats loop. This has been observed in production on BlueField-3 DPUs (arm64), where ovs-vswitchd queries netdev statistics over netlink during NIC bringup, racing mlx5e_open_channel() -> mlx5e_channel_stats_alloc() on another CPU: Unable to handle kernel NULL pointer dereference at virtual address 0x840 Hardware name: BlueField-3 DPU pc : mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core] Call trace: mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core] dev_get_stats+0x50/0xc0 ovs_vport_get_stats+0x38/0xac [openvswitch] ovs_vport_cmd_fill_info+0x194/0x290 [openvswitch] ovs_vport_cmd_get+0xbc/0x10c [openvswitch] genl_family_rcv_msg_doit+0xd0/0x160 genl_rcv_msg+0xec/0x1f0 netlink_rcv_skb+0x64/0x130 genl_rcv+0x40/0x60 netlink_unicast+0x2fc/0x370 netlink_sendmsg+0x1dc/0x454 ... __arm64_sys_sendmsg+0x2c/0x40 Add mlx5e_stats_nch_write() and mlx5e_stats_nch_read() helpers in en.h that wrap the smp_store_release()/smp_load_acquire() pair on stats_nch. The release/acquire pair establishes the contract: stats_nch == N => channel_stats[0..N-1] are visible and non-NULL. Publish the stats_nch increment via mlx5e_stats_nch_write() in the writer (mlx5e_channel_stats_alloc()), and read stats_nch via mlx5e_stats_nch_read() in all readers: mlx5e RX/TX queue stats, mlx5e_get_base_stats(), ethtool channels stats, IPoIB stats, the sw_stats fold and the HV VHCA stats agent. | ||||
| CVE-2026-72384 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/ts4800: Fix missing chained handler cleanup on remove The driver installs a chained handler for the parent interrupt during probe using irq_set_chained_handler_and_data(), but the remove function does not clear this handler. This leaves a dangling handler that may be called when the parent interrupt fires after the driver has been removed, potentially accessing freed memory and causing a kernel crash. Additionally, the parent_irq obtained via irq_of_parse_and_map() is not stored, making it inaccessible in the remove function. Moreover, interrupt mappings created during probe are not properly disposed. Fix this by: - Saving parent_irq in probe - Clearing the chained handler with NULL in ts4800_ic_remove() - Disposing all IRQ mappings before domain removal to prevent resource leaks | ||||
| CVE-2026-72388 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock Since dma_fence objects can be shared with other subsystems, they may be accessed from hardirq context in those drivers, and we have to take that into account by also using the IRQ-safe variant when acquiring the lock. While at it, switch to the guard model. | ||||
| CVE-2026-72389 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: stp: Fix a potential use-after-free when deleting a bridge The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 | ||||
| CVE-2026-72390 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF The teql master->slaves singly linked list is not protected against multiple writes. It can be mod'ed concurently from teql_master_xmit(), teql_dequeue(), teql_init() and teql_destroy() without holding any list lock or RCU protection. [email protected] has demonstrated that the qdisc is freed after an RCU grace period, but teql_master_xmit() running on another CPU can still hold a stale pointer into the list, resulting in a slab-use-after-free: BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0 Read of size 8 at addr ffff888013fb0440 by task poc/332 Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512) The fix? Add a per-master slaves_lock spinlock that serializes all mutations of master->slaves and the NEXT_SLAVE() links in teql_destroy() and teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock around those updates. Annotate master->slaves and the per-slave ->next pointer with __rcu and use the appropriate RCU accessors everywhere they are touched: rcu_assign_pointer() on the writer side (under slaves_lock), rcu_dereference_protected() for the writer-side loads (also under slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(), which run under RTNL. Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list traversal in teql_master_xmit(), so that readers either observe a fully linked list or are deferred until the in-flight mutation completes. The two early-return paths in teql_master_xmit() are updated to release the RCU-bh read-side critical section before returning, since leaving it held would disable BH on that CPU for good. | ||||
| CVE-2026-72391 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: sfp: free mii_bus in sfp_i2c_mdiobus_destroy sfp_i2c_mdiobus_create() allocates the I2C MDIO bus with mdio_i2c_alloc(), a plain (non-devm) allocation, and registers it. sfp_i2c_mdiobus_destroy() only unregisters the bus and clears sfp->i2c_mii without calling mdiobus_free(). As the only reference to the bus is then cleared, the struct mii_bus is leaked. This is hit whenever a copper/RollBall SFP module that instantiated an MDIO bus is removed: sfp_sm_main() takes the global teardown path and calls sfp_i2c_mdiobus_destroy(). sfp_cleanup(), on driver unbind, frees sfp->i2c_mii directly, which is why the leak only triggered on module hot-removal and not on unbind. Free the bus in sfp_i2c_mdiobus_destroy() to match the allocation done in sfp_i2c_mdiobus_create(). | ||||
| CVE-2026-72393 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: don't cache shinfo across skb realloc fbnic_tx_lso() calls skb_cow_head() which may reallocate the skb including the shared info. We can't use the pointer calculated before the call. BUG: KASAN: slab-use-after-free in fbnic_tx_lso.isra.0+0x668/0x8e0 Read of size 4 at addr ff110000262edd98 by task swapper/5/0 Call Trace: fbnic_tx_lso.isra.0+0x668/0x8e0 fbnic_xmit_frame+0x622/0xba0 dev_hard_start_xmit+0xf4/0x620 Allocated by task 8653: __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xcc/0x6c0 sock_alloc_send_pskb+0x327/0x3f0 __ip_append_data+0x188b/0x47a0 ip_make_skb+0x24a/0x300 udp_sendmsg+0x14d2/0x21e0 Freed by task 0: kfree+0x123/0x5a0 pskb_expand_head+0x36c/0xfa0 fbnic_tx_lso.isra.0+0x500/0x8e0 fbnic_xmit_frame+0x622/0xba0 dev_hard_start_xmit+0xf4/0x620 sch_direct_xmit+0x25b/0x1100 The buggy address belongs to the object at ff110000262edc40 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 344 bytes inside of freed 640-byte region [ff110000262edc40, ff110000262ede | ||||
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||
| CVE-2026-72412 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes. | ||||
| CVE-2026-72431 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: alloc_tag: fix use-after-free in /proc/allocinfo after module unload allocinfo_start() only reinitializes the codetag iterator at position 0. For subsequent reads (position > 0), it reuses cached iterator state from the previous batch. allocinfo_stop() drops mod_lock between read batches, which allows module unload to complete and free the module memory that the cached iterator still references: CPU0 (read) CPU1 (rmmod) ---- ---- allocinfo_start(pos=0) down_read(mod_lock) allocinfo_show() ... allocinfo_stop() up_read(mod_lock) codetag_unload_module() kfree(cmod) release_module_tags() ... free_mod_mem() allocinfo_start(pos=N) down_read(mod_lock) // reuses cached iter, skips re-init allocinfo_show() ct->filename <-- UAF After free_mod_mem() frees the module's .rodata, allocinfo_show() dereferences ct->filename, ct->function which point there. Save the iterator state in allocinfo_next() and resume from it in allocinfo_start() with codetag_next_ct(), which detects module removal via idr_find() returning NULL and skips to the next module. | ||||
| CVE-2026-72397 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the vrm_version configured by the driver, while pmbus_reg2data_vid() already switched on it. Any driver that selects a non-VR11 VID mode and exposes a regulator (or hwmon vout setter) sent dangerously wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the chip interprets as 1080 mV. Mirror pmbus_reg2data_vid() so writes round-trip with reads. | ||||
| CVE-2026-72398 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: add INIT verification after cookie unpacking In SCTP handshake, the INIT chunk is initially processed by the server and embedded into the cookie carried in INIT-ACK. The client then returns this cookie via COOKIE-ECHO, where the server unpacks it and reconstructs the original INIT chunk. When cookie authentication is enabled, the cookie contents are protected against tampering, so reusing the unpacked INIT without re-verification is safe. However, when cookie authentication is disabled, the reconstructed INIT can no longer be trusted. In this case, the INIT must be explicitly validated after unpacking to avoid processing potentially tampered data. Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook()) when cookie_auth_enable is disabled. On failure, the new association is freed and the packet is discarded. Also tighten cookie validation in sctp_unpack_cookie() by verifying the embedded chunk type is SCTP_CID_INIT before treating it as an INIT chunk. Finally, update sctp_verify_init() to validate parameter bounds using the actual embedded INIT length instead of chunk->chunk_end, since the INIT stored in COOKIE-ECHO may not span the entire chunk buffer. | ||||
| CVE-2026-72400 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: seg6: validate SRH length before reading fixed fields seg6_validate_srh() reads fixed SRH fields such as srh->type and srh->hdrlen before checking that the supplied length covers the fixed struct ipv6_sr_hdr fields. The BPF SEG6 encap path reaches this with a BPF program-supplied pointer and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6 encap header can therefore make the validator read srh->type at offset 2 beyond the caller-supplied buffer. Reject lengths shorter than the fixed SRH at the top of seg6_validate_srh(), before any field is read. This fixes the BPF helper path and keeps the common validator robust. | ||||
| CVE-2026-72401 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insn_aux_data leak on verifier err_free_env path When bpf_check() allocates env->insn_aux_data successfully but later fails to allocate env->succ, it jumps directly to err_free_env. The existing vfree(env->insn_aux_data) sits before the err_free_env label, so that direct jump bypasses it and leaks insn_aux_data. Move vfree(env->insn_aux_data) into err_free_env so all early and late exit paths release it consistently. | ||||
| CVE-2026-74260 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers. This patch also disables BH when transmitting the skb to address a possible migration to different CPU leading to imbalanced decrementation of the recursion counters. This is modeled after Florian Westphal's dev_xmit_recursion*() API available since commit 97cdcf37b57e ("net: place xmit recursion in softnet data") according to its current state in the tree. | ||||
| CVE-2026-70906 | 2 Oracle, Redhat | 4 Java Se, Enterprise Linux, Hummingbird and 1 more | 2026-08-22 | 7.5 High |
| Vulnerability in Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 25.0.4 and 26.0.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). | ||||
| CVE-2026-72420 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid R5_Overlap races while breaking stripe batches KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request() on sh->dev[i].flags (plain word write vs. atomic bit op).. and .. one possible scenario is: CPU1 CPU2 break_stripe_batch_list(sh1) -> handle sh2 -> lock(sh2) -> sh2->batch_head = NULL -> unlock(sh2) -> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags) -> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags) -> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap No wait_up_bit(), CPU2 could be wait_on_bit() forever... Fix by : - Expand the protect zone. - Use batch_head's device flag's snaphot when no held head_sh->stripe_lock. - Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either: - see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken. KCSAN report: ================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap | ||||