| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, two user‑information endpoints can reveal sensitive device and account details under conditions that are not intended for normal operation. |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, an unauthenticated network check function can be triggered to probe arbitrary hosts from the device’s internal network. This may expose internal information or leak data via DNS queries. |
| In Anjvision YSSD-RTMP-H5 firmware version 3.3.2.4, an empty-body POST to /setUserConfig, dispatched through the web server's SOAP-RPC handler, silently downgrades the administrator password to the default value and corrupts the in-memory authentication state until the device reloads. The handler does not verify the session's privilege level, so any authenticated user can trigger it. |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, an internal debug interface can be enabled through an undocumented pathway, exposing functions not intended for normal operation. When activated, this interface allows actions that could unintentionally provide elevated system access. |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, the firmware embeds hardcoded cloud‑API credentials that are shared across deployed devices. Anyone obtaining the public firmware package can reuse these values to interact with the cloud service in ways not intended for normal operation. |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, both the local and cloud update mechanisms apply new firmware without any cryptographic verification, relying only on basic hashing. This design allows an attacker who can reach the update routine to introduce untrusted firmware images that the device will accept as valid. |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, a hidden debug interface can be enabled through an authenticated request, allowing additional commands to be sent to a backend service. Once active, this pathway can unintentionally expose system‑level functionality that could be misused if crafted inputs reach the underlying command handler. |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, several ONVIF service endpoints process management requests without enforcing required authentication. This could allow an unauthorized attacker to access sensitive device operations. |
| In Baicells Nova 430H, an unauthenticated device within radio range can send a malformed uplink message during connection setup that contains an invalid NAS payload. Because the eNodeB does not properly validate this payload, it forwards the message to the core network, which can trigger a shutdown of the signaling association for the cell. This results in a temporary service disruption until the eNodeB and core network re-establish connectivity. |
| When NetX Secure is built with `NX_SECURE_KEY_CLEAR`, every TLS record sent on an active session is wiped after it has been handed to TCP. By then the TCP layer owns the packet chain and may already have released it to the packet pool. The wipe therefore writes zeros into packets that are free or in use by another thread, and when a reused packet's pointers no longer describe the old data, the length of the wipe underflows and it runs past the end of the packet pool. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
sctp_verify_asconf() walks ASCONF-ACK parameters with
sctp_walk_params(), which advances by SCTP_PAD4(length), while the
consumer sctp_get_asconf_response() iterates the same parameters
advancing by the raw length, without padding. A single odd-length
parameter desynchronises the two walks and makes the consumer
interpret attacker-controlled bytes at a misaligned offset.
When those bytes yield a length of zero, the while loop over
asconf_ack_len makes no progress, spinning forever in softirq
context, and the watchdog reports a soft lockup. All reads stay
within the received skb, so the lockup is a pure remote denial of
service. A remote peer can trigger it with a crafted ASCONF-ACK on
an ADD-IP enabled association with an outstanding ASCONF (RFC 5061
section 4.1.2 requires the chunk to be authenticated, but the
predefined empty key id 0 allows the peer to compute the same
association HMAC from publicly exchanged parameters, so the gate
does not help).
The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs
no length check, letting a parameter without a complete error
header reach the consumer, which reads errhdr.cause past the end of
the parameter, an out-of-bounds read.
Reject SCTP_PARAM_ERR_CAUSE parameters shorter than
sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the
verifier, and advance the consumer iterator with the same padding
rule as the verifier to keep the two walks in lockstep. The verifier
change guarantees a complete error header in every ERR_CAUSE
parameter the consumer can see, so the consumer's asconf_ack_len
check is dropped and it returns err_param->cause directly. The
consumer padding fix is still required because odd lengths remain
valid for SCTP_PARAM_ERR_CAUSE per RFC 5061.
The issue was found by ZeroHive, a vulnerability hunting agent at
Tencent Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: invalidate fscache for fallocate range operations
smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and
smb3_collapse_range() modify file contents through server-side range
operations. These operations discard the affected page cache, but leave
the FS-Cache cookie valid, so a later read may return data cached before
the range operation.
Fix this by invalidating FS-Cache after outstanding I/O has completed
and before modifying the file on the server.
Run the following as root on a CIFS mount with fsc enabled and an active
CacheFiles backend:
bash -c '
MNT=/mnt/cifs
FILE="$MNT/repro"
# Generate four 1 MiB random blocks: [A][B][C][D].
dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none
# Expected contents after zeroing B: [A][zero][C][D].
cp /tmp/src /tmp/expected
dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \
conv=notrunc status=none
cp /tmp/src "$FILE"
# Populate FS-Cache, then discard the page cache.
sync
echo 1 > /proc/sys/vm/drop_caches
cat "$FILE" > /dev/null
sync
echo 1 > /proc/sys/vm/drop_caches
fallocate --zero-range -o 1M -l 1M "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Before this change, the readback differs from /tmp/expected:
readback: STALE DATA
After this change, it matches:
readback: OK |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for zero range
When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE,
smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing
the file to grow beyond the caller's file-size limit.
Fix this by calling inode_newsize_ok() before sending the zero-range
request when the operation would extend EOF.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072
truncate -s 2M "$FILE"
fallocate --zero-range -o 0 -l 4M "$FILE"
echo "fallocate rc=$?"
stat -c "file size=%s" "$FILE"
'
Before this change, the operation succeeds despite the 3 MiB limit:
fallocate rc=0
file size=4194304
After this change, fallocate fails and leaves the file at 2 MiB. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.7.11, PyEnvCfg.write() writes prompt values verbatim to the line-oriented pyvenv.cfg format while PyEnvCfg._read_values() parses the file with str.splitlines() and accepts the last value for duplicate keys. An attacker who influences --prompt, VIRTUALENV_PROMPT, or configuration input can insert a recognized line boundary and additional keys, including home, causing consumers to use an attacker-selected base interpreter or corrupted environment metadata. The security impact requires prompt input from outside the operator's trust boundary; directly supplied prompt content primarily corrupts the operator's own environment. This issue is fixed in version 21.7.11. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.7.12, BatchActivator.quote() returns prompt text unchanged before activate.bat inserts it into a cmd.exe set "VAR=value" statement. An attacker who influences --prompt, VIRTUALENV_PROMPT, or the corresponding configuration value can include a double quote that closes the assignment and leaves following cmd.exe operators as executable syntax. When a user activates the generated Windows environment, the injected commands run with that user's privileges. This issue is fixed in version 21.7.12. |
| MongoDB SQL Schema Builder CLI records its startup configuration to standard output and, when file logging is enabled, to a log file on disk. Certain connection settings were written without redaction, so authentication material supplied by the operator could appear in plaintext in that diagnostic output. A local user with read access to the terminal session or the log directory, or anyone with access to a location where those logs are subsequently collected, could obtain those values. |
