| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
amdkfd: use calloc instead of kzalloc to avoid integer overflow
This uses calloc instead of doing the multiplication which might
overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
tomoyo: fix UAF write bug in tomoyo_write_control()
Since tomoyo_write_control() updates head->write_buf when write()
of long lines is requested, we need to fetch head->write_buf after
head->io_sem is held. Otherwise, concurrent write() requests can
cause use-after-free-write and double-free problems. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: signal epoll threads of self-work
In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.
It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "kobject: Remove redundant checks for whether ktype is NULL"
This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31.
It is reported to cause problems, so revert it for now until the root
cause can be found. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Stop relying on userspace for info to fault in xsave buffer
Before this change, the expected size of the user space buffer was
taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed
from user-space, so it is possible construct a sigreturn frame where:
* fx_sw->xstate_size is smaller than the size required by valid bits in
fx_sw->xfeatures.
* user-space unmaps parts of the sigrame fpu buffer so that not all of
the buffer required by xrstor is accessible.
In this case, xrstor tries to restore and accesses the unmapped area
which results in a fault. But fault_in_readable succeeds because buf +
fx_sw->xstate_size is within the still mapped area, so it goes back and
tries xrstor again. It will spin in this loop forever.
Instead, fault in the maximum size which can be touched by XRSTOR (taken
from fpstate->user_size).
[ dhansen: tweak subject / changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Fix block process call transactions
According to the Intel datasheets, software must reset the block
buffer index twice for block process call transactions: once before
writing the outgoing data to the buffer, and once again before
reading the incoming data from the buffer.
The driver is currently missing the second reset, causing the wrong
portion of the block buffer to be read. |
| copy_params in drivers/md/dm-ioctl.c in the Linux kernel through 6.7.1 can attempt to allocate more than INT_MAX bytes, and crash, because of a missing param_kernel->data_size check. This is related to ctl_ioctl. |
| In btrfs_get_root_ref in fs/btrfs/disk-io.c in the Linux kernel through 6.7.1, there can be an assertion failure and crash because a subvolume can be read out too soon after its root item is inserted upon subvolume creation. |
| In rds_recv_track_latency in net/rds/af_rds.c in the Linux kernel through 6.7.1, there is an off-by-one error for an RDS_MSG_RX_DGRAM_TRACE_MAX comparison, resulting in out-of-bounds access. |
| dm_table_create in drivers/md/dm-table.c in the Linux kernel through 6.7.4 can attempt to (in alloc_targets) allocate more than INT_MAX bytes, and crash, because of a missing check for struct dm_ioctl.target_count. |
| The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. For a successful attack, wpa_supplicant must be configured to not verify the network's TLS certificate during Phase 1 authentication, and an eap_peap_decrypt vulnerability can then be abused to skip Phase 2 authentication. The attack vector is sending an EAP-TLV Success packet instead of starting Phase 2. This allows an adversary to impersonate Enterprise Wi-Fi networks. |
| Transmit requests in Xen's virtual network protocol can consist of
multiple parts. While not really useful, except for the initial part
any of them may be of zero length, i.e. carry no data at all. Besides a
certain initial portion of the to be transferred data, these parts are
directly translated into what Linux calls SKB fragments. Such converted
request parts can, when for a particular SKB they are all of length
zero, lead to a de-reference of NULL in core networking code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: Prevent potential NULL dereference
The btrtl_initialize() function checks that rtl_load_file() either
had an error or it loaded a zero length file. However, if it loaded
a zero length file then the error code is not set correctly. It
results in an error pointer vs NULL bug, followed by a NULL pointer
dereference. This was detected by Smatch:
drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR' |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: lights: check return of get_channel_from_mode
If channel for the given node is not found we return null from
get_channel_from_mode. Make sure we validate the return pointer
before using it in two of the missing places.
This was originally reported in [0]:
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[0] https://lore.kernel.org/all/[email protected] |
| In the Linux kernel, the following vulnerability has been resolved:
serial: max3100: Lock port->lock when calling uart_handle_cts_change()
uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:
WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
...
Workqueue: max3100-0 max3100_work [max3100]
RIP: 0010:uart_handle_cts_change+0xa6/0xb0
...
max3100_handlerx+0xc5/0x110 [max3100]
max3100_work+0x12a/0x340 [max3100] |
| In the Linux kernel, the following vulnerability has been resolved:
serial: max3100: Update uart_driver_registered on driver removal
The removal of the last MAX3100 device triggers the removal of
the driver. However, code doesn't update the respective global
variable and after insmod — rmmod — insmod cycle the kernel
oopses:
max3100 spi-PRP0001:01: max3100_probe: adding port 0
BUG: kernel NULL pointer dereference, address: 0000000000000408
...
RIP: 0010:serial_core_register_port+0xa0/0x840
...
max3100_probe+0x1b6/0x280 [max3100]
spi_probe+0x8d/0xb0
Update the actual state so next time UART driver will be registered
again.
Hugo also noticed, that the error path in the probe also affected
by having the variable set, and not cleared. Instead of clearing it
move the assignment after the successfull uart_register_driver() call. |
| In the Linux kernel, the following vulnerability has been resolved:
stm class: Fix a double free in stm_register_device()
The put_device(&stm->dev) call will trigger stm_device_release() which
frees "stm" so the vfree(stm) on the next line is a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stk1160: fix bounds checking in stk1160_copy_video()
The subtract in this condition is reversed. The ->length is the length
of the buffer. The ->bytesused is how many bytes we have copied thus
far. When the condition is reversed that means the result of the
subtraction is always negative but since it's unsigned then the result
is a very high positive value. That means the overflow check is never
true.
Additionally, the ->bytesused doesn't actually work for this purpose
because we're not writing to "buf->mem + buf->bytesused". Instead, the
math to calculate the destination where we are writing is a bit
involved. You calculate the number of full lines already written,
multiply by two, skip a line if necessary so that we start on an odd
numbered line, and add the offset into the line.
To fix this buffer overflow, just take the actual destination where we
are writing, if the offset is already out of bounds print an error and
return. Otherwise, write up to buf->length bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix a race between readers and resize checks
The reader code in rb_get_reader_page() swaps a new reader page into the
ring buffer by doing cmpxchg on old->list.prev->next to point it to the
new page. Following that, if the operation is successful,
old->list.next->prev gets updated too. This means the underlying
doubly-linked list is temporarily inconsistent, page->prev->next or
page->next->prev might not be equal back to page for some page in the
ring buffer.
The resize operation in ring_buffer_resize() can be invoked in parallel.
It calls rb_check_pages() which can detect the described inconsistency
and stop further tracing:
[ 190.271762] ------------[ cut here ]------------
[ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0
[ 190.271789] Modules linked in: [...]
[ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1
[ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f
[ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014
[ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0
[ 190.272023] Code: [...]
[ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206
[ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80
[ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700
[ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000
[ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720
[ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000
[ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000
[ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0
[ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 190.272077] Call Trace:
[ 190.272098] <TASK>
[ 190.272189] ring_buffer_resize+0x2ab/0x460
[ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0
[ 190.272206] tracing_resize_ring_buffer+0x65/0x90
[ 190.272216] tracing_entries_write+0x74/0xc0
[ 190.272225] vfs_write+0xf5/0x420
[ 190.272248] ksys_write+0x67/0xe0
[ 190.272256] do_syscall_64+0x82/0x170
[ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 190.272373] RIP: 0033:0x7f1bd657d263
[ 190.272381] Code: [...]
[ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263
[ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001
[ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000
[ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500
[ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002
[ 190.272412] </TASK>
[ 190.272414] ---[ end trace 0000000000000000 ]---
Note that ring_buffer_resize() calls rb_check_pages() only if the parent
trace_buffer has recording disabled. Recent commit d78ab792705c
("tracing: Stop current tracer when resizing buffer") causes that it is
now always the case which makes it more likely to experience this issue.
The window to hit this race is nonetheless very small. To help
reproducing it, one can add a delay loop in rb_get_reader_page():
ret = rb_head_page_replace(reader, cpu_buffer->reader_page);
if (!ret)
goto spin;
for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */
__asm__ __volatile__ ("" : : : "memory");
rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
..
---truncated--- |
