| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
Implement the workaround for ARM Cortex-A520 erratum 2966298. On an
affected Cortex-A520 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The workaround is to execute a TLBI before returning to EL0 after all
loads of privileged data. A non-shareable TLBI to any address is
sufficient.
The workaround isn't necessary if page table isolation (KPTI) is
enabled, but for simplicity it will be. Page table isolation should
normally be disabled for Cortex-A520 as it supports the CSV3 feature
and the E0PD feature (used when KASLR is enabled). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: fix oops in concurrently setting insn_emulation sysctls
emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
| Internal error: Oops: 96000006 [#1] SMP
| Call trace:
| update_insn_emulation_mode+0xc0/0x148
| emulation_proc_handler+0x64/0xb8
| proc_sys_call_handler+0x9c/0xf8
| proc_sys_write+0x18/0x20
| __vfs_write+0x20/0x48
| vfs_write+0xe4/0x1d0
| ksys_write+0x70/0xf8
| __arm64_sys_write+0x20/0x28
| el0_svc_common.constprop.0+0x7c/0x1c0
| el0_svc_handler+0x2c/0xa0
| el0_svc+0x8/0x200
To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
If a compat process tries to execute an unknown system call above the
__ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the
offending process. Information about the error is printed to dmesg in
compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() ->
arm64_show_signal().
arm64_show_signal() interprets a non-zero value for
current->thread.fault_code as an exception syndrome and displays the
message associated with the ESR_ELx.EC field (bits 31:26).
current->thread.fault_code is set in compat_arm_syscall() ->
arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx
value. This means that the ESR_ELx.EC field has the value that the user set
for the syscall number and the kernel can end up printing bogus exception
messages*. For example, for the syscall number 0x68000000, which evaluates
to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error:
[ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000]
[ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79
[ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]
which is misleading, as the bad compat syscall has nothing to do with
pointer authentication.
Stop arm64_show_signal() from printing exception syndrome information by
having compat_arm_syscall() set the ESR_ELx value to 0, as it has no
meaning for an invalid system call number. The example above now becomes:
[ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000]
[ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80
[ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]
which although shows less information because the syscall number,
wrongfully advertised as the ESR value, is missing, it is better than
showing plainly wrong information. The syscall number can be easily
obtained with strace.
*A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative
integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END
evaluates to true; the syscall will exit to userspace in this case with the
ENOSYS error code instead of arm64_notify_die() being called. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gma500: Fix WARN_ON(lock->magic != lock) error
psb_gem_unpin() calls dma_resv_lock() but the underlying ww_mutex
gets destroyed by drm_gem_object_release() move the
drm_gem_object_release() call in psb_gem_free_object() to after
the unpin to fix the below warning:
[ 79.693962] ------------[ cut here ]------------
[ 79.693992] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 79.694015] WARNING: CPU: 0 PID: 240 at kernel/locking/mutex.c:582 __ww_mutex_lock.constprop.0+0x569/0xfb0
[ 79.694052] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer qrtr bnep ath9k ath9k_common ath9k_hw snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel ath3k snd_intel_dspcfg mac80211 snd_intel_sdw_acpi btusb snd_hda_codec btrtl btbcm btintel btmtk bluetooth at24 snd_hda_core snd_hwdep uvcvideo snd_seq libarc4 videobuf2_vmalloc ath videobuf2_memops videobuf2_v4l2 videobuf2_common snd_seq_device videodev acer_wmi intel_powerclamp coretemp mc snd_pcm joydev sparse_keymap ecdh_generic pcspkr wmi_bmof cfg80211 i2c_i801 i2c_smbus snd_timer snd r8169 rfkill lpc_ich soundcore acpi_cpufreq zram rtsx_pci_sdmmc mmc_core serio_raw rtsx_pci gma500_gfx(E) video wmi ip6_tables ip_tables i2c_dev fuse
[ 79.694436] CPU: 0 PID: 240 Comm: plymouthd Tainted: G W E 6.0.0-rc3+ #490
[ 79.694457] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[ 79.694469] RIP: 0010:__ww_mutex_lock.constprop.0+0x569/0xfb0
[ 79.694496] Code: ff 85 c0 0f 84 15 fb ff ff 8b 05 ca 3c 11 01 85 c0 0f 85 07 fb ff ff 48 c7 c6 30 cb 84 aa 48 c7 c7 a3 e1 82 aa e8 ac 29 f8 ff <0f> 0b e9 ed fa ff ff e8 5b 83 8a ff 85 c0 74 10 44 8b 0d 98 3c 11
[ 79.694513] RSP: 0018:ffffad1dc048bbe0 EFLAGS: 00010282
[ 79.694623] RAX: 0000000000000028 RBX: 0000000000000000 RCX: 0000000000000000
[ 79.694636] RDX: 0000000000000001 RSI: ffffffffaa8b0ffc RDI: 00000000ffffffff
[ 79.694650] RBP: ffffad1dc048bc80 R08: 0000000000000000 R09: ffffad1dc048ba90
[ 79.694662] R10: 0000000000000003 R11: ffffffffaad62fe8 R12: ffff9ff302103138
[ 79.694675] R13: ffff9ff306ec8000 R14: ffff9ff307779078 R15: ffff9ff3014c0270
[ 79.694690] FS: 00007ff1cccf1740(0000) GS:ffff9ff3bc200000(0000) knlGS:0000000000000000
[ 79.694705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 79.694719] CR2: 0000559ecbcb4420 CR3: 0000000013210000 CR4: 00000000000006f0
[ 79.694734] Call Trace:
[ 79.694749] <TASK>
[ 79.694761] ? __schedule+0x47f/0x1670
[ 79.694796] ? psb_gem_unpin+0x27/0x1a0 [gma500_gfx]
[ 79.694830] ? lock_is_held_type+0xe3/0x140
[ 79.694864] ? ww_mutex_lock+0x38/0xa0
[ 79.694885] ? __cond_resched+0x1c/0x30
[ 79.694902] ww_mutex_lock+0x38/0xa0
[ 79.694925] psb_gem_unpin+0x27/0x1a0 [gma500_gfx]
[ 79.694964] psb_gem_unpin+0x199/0x1a0 [gma500_gfx]
[ 79.694996] drm_gem_object_release_handle+0x50/0x60
[ 79.695020] ? drm_gem_object_handle_put_unlocked+0xf0/0xf0
[ 79.695042] idr_for_each+0x4b/0xb0
[ 79.695066] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 79.695095] drm_gem_release+0x1c/0x30
[ 79.695118] drm_file_free.part.0+0x1ea/0x260
[ 79.695150] drm_release+0x6a/0x120
[ 79.695175] __fput+0x9f/0x260
[ 79.695203] task_work_run+0x59/0xa0
[ 79.695227] do_exit+0x387/0xbe0
[ 79.695250] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 79.695275] ? lockdep_hardirqs_on+0x7d/0x100
[ 79.695304] do_group_exit+0x33/0xb0
[ 79.695331] __x64_sys_exit_group+0x14/0x20
[ 79.695353] do_syscall_64+0x58/0x80
[ 79.695376] ? up_read+0x17/0x20
[ 79.695401] ? lock_is_held_type+0xe3/0x140
[ 79.695429] ? asm_exc_page_fault+0x22/0x30
[ 79.695450] ? lockdep_hardirqs_on+0x7d/0x100
[ 79.695473] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 79.695493] RIP: 0033:0x7ff1ccefe3f1
[ 79.695516] Code: Unable to access opcode bytes at RIP 0x7ff1ccefe3c7.
[ 79.695607] RSP: 002b:00007ffed4413378 EFLAGS:
---truncated--- |
| Malwarebytes 1.0.14 for Linux doesn't properly compute signatures in some scenarios. This allows a bypass of detection. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: Fix validation of nexthop addresses
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix NULL pointer deference on eir_get_service_data
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/skx_common: Fix general protection fault
After loading i10nm_edac (which automatically loads skx_edac_common), if
unload only i10nm_edac, then reload it and perform error injection testing,
a general protection fault may occur:
mce: [Hardware Error]: Machine check events logged
Oops: general protection fault ...
...
Workqueue: events mce_gen_pool_process
RIP: 0010:string+0x53/0xe0
...
Call Trace:
<TASK>
? die_addr+0x37/0x90
? exc_general_protection+0x1e7/0x3f0
? asm_exc_general_protection+0x26/0x30
? string+0x53/0xe0
vsnprintf+0x23e/0x4c0
snprintf+0x4d/0x70
skx_adxl_decode+0x16a/0x330 [skx_edac_common]
skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common]
skx_mce_check_error+0x17/0x20 [skx_edac_common]
...
The issue arose was because the variable 'adxl_component_count' (inside
skx_edac_common), which counts the ADXL components, was not reset. During
the reloading of i10nm_edac, the count was incremented by the actual number
of ADXL components again, resulting in a count that was double the real
number of ADXL components. This led to an out-of-bounds reference to the
ADXL component array, causing the general protection fault above.
Fix this issue by resetting the 'adxl_component_count' in adxl_put(),
which is called during the unloading of {skx,i10nm}_edac. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Add cond_resched() to ftrace_graph_set_hash()
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced. |
| In the Linux kernel, the following vulnerability has been resolved:
objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds()
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx() |
| In the Linux kernel, the following vulnerability has been resolved:
aoe: clean device rq_list in aoedev_downdev()
An aoe device's rq_list contains accepted block requests that are
waiting to be transmitted to the aoe target. This queue was added as
part of the conversion to blk_mq. However, the queue was not cleaned out
when an aoe device is downed which caused blk_mq_freeze_queue() to sleep
indefinitely waiting for those requests to complete, causing a hang. This
fix cleans out the queue before calling blk_mq_freeze_queue(). |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu().
As syzbot reported [0], mpls_route_input_rcu() can be called
from mpls_getroute(), where is under RTNL.
net->mpls.platform_label is only updated under RTNL.
Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to
silence the splat.
[0]:
WARNING: suspicious RCU usage
6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted
----------------------------
net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.2.4451/17730:
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline]
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961
stack backtrace:
CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865
mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84
mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381
rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964
netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa98/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmmsg+0x200/0x420 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0a2818e969
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969
RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: add lec_mutex
syzbot found its way in net/atm/lec.c, and found an error path
in lecd_attach() could leave a dangling pointer in dev_lec[].
Add a mutex to protect dev_lecp[] uses from lecd_attach(),
lec_vcc_attach() and lec_mcast_attach().
Following patch will use this mutex for /proc/net/atm/lec.
BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline]
BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142
CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xcd/0x680 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
lecd_attach net/atm/lec.c:751 [inline]
lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 6132:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4328 [inline]
__kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015
alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711
lecd_attach net/atm/lec.c:737 [inline]
lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6132:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x51/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x2b4/0x4d0 mm/slub.c:4842
free_netdev+0x6c5/0x910 net/core/dev.c:11892
lecd_attach net/atm/lec.c:744 [inline]
lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth().
Call Trace:
[ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550
[ 97.285732]
[ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11
[ 97.287032] Hardware name: linux,dummy-virt (DT)
[ 97.287815] Call trace:
[ 97.288279] dump_backtrace+0xa0/0x128
[ 97.288946] show_stack+0x20/0x38
[ 97.289551] dump_stack_lvl+0x78/0xc8
[ 97.290203] print_address_description.constprop.0+0x84/0x3c8
[ 97.291159] print_report+0xb0/0x280
[ 97.291792] kasan_report+0x84/0xd0
[ 97.292421] __asan_load8+0x9c/0xc0
[ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.293835] process_fetch_insn+0x770/0xa30
[ 97.294562] kprobe_trace_func+0x254/0x3b0
[ 97.295271] kprobe_dispatcher+0x98/0xe0
[ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210
[ 97.296774] call_break_hook+0xc4/0x100
[ 97.297451] brk_handler+0x24/0x78
[ 97.298073] do_debug_exception+0xac/0x178
[ 97.298785] el1_dbg+0x70/0x90
[ 97.299344] el1h_64_sync_handler+0xcc/0xe8
[ 97.300066] el1h_64_sync+0x78/0x80
[ 97.300699] kernel_clone+0x0/0x500
[ 97.301331] __arm64_sys_clone+0x70/0x90
[ 97.302084] invoke_syscall+0x68/0x198
[ 97.302746] el0_svc_common.constprop.0+0x11c/0x150
[ 97.303569] do_el0_svc+0x38/0x50
[ 97.304164] el0_svc+0x44/0x1d8
[ 97.304749] el0t_64_sync_handler+0x100/0x130
[ 97.305500] el0t_64_sync+0x188/0x190
[ 97.306151]
[ 97.306475] The buggy address belongs to stack of task 1.sh/2550
[ 97.307461] and is located at offset 0 in frame:
[ 97.308257] __se_sys_clone+0x0/0x138
[ 97.308910]
[ 97.309241] This frame has 1 object:
[ 97.309873] [48, 184) 'args'
[ 97.309876]
[ 97.310749] The buggy address belongs to the virtual mapping at
[ 97.310749] [ffff800089270000, ffff800089279000) created by:
[ 97.310749] dup_task_struct+0xc0/0x2e8
[ 97.313347]
[ 97.313674] The buggy address belongs to the physical page:
[ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a
[ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff)
[ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000
[ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 97.319445] page dumped because: kasan: bad access detected
[ 97.320371]
[ 97.320694] Memory state around the buggy address:
[ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00
[ 97.325023] ^
[ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
This issue seems to be related to the behavior of some gcc compilers and
was also fixed on the s390 architecture before:
commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
As described in that commit, regs_get_kernel_stack_nth() has confirmed that
`addr` is on the stack, so reading the value at `*addr` should be allowed.
Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case.
[will: Use '*addr' as the argument to READ_ONCE_NOCHECK()] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pp: Fix potential NULL pointer dereference in atomctrl_initialize_mc_reg_table
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: fix double-free on mc_dev
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus); |
| Use after free in Password Manager in Google Chrome prior to 143.0.7499.110 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Toolbar in Google Chrome on Android prior to 143.0.7499.110 allowed a remote attacker to perform domain spoofing via a crafted HTML page. (Chromium security severity: Medium) |
