| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Disable coherent dumb buffers without 3d
Coherent surfaces make only sense if the host renders to them using
accelerated apis. Without 3d the entire content of dumb buffers stays
in the guest making all of the extra work they're doing to synchronize
between guest and host useless.
Configurations without 3d also tend to run with very low graphics
memory limits. The pinned console fb, mob cursors and graphical login
manager tend to run out of 16MB graphics memory that those guests use.
Fix it by making sure the coherent dumb buffers are only used on
configs with 3d enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails
If z_erofs_gbuf_growsize() partially fails on a global buffer due to
memory allocation failure or fault injection (as reported by syzbot [1]),
new pages need to be freed by comparing to the existing pages to avoid
memory leaks.
However, the old gbuf->pages[] array may not be large enough, which can
lead to null-ptr-deref or out-of-bound access.
Fix this by checking against gbuf->nrpages in advance.
[1] https://lore.kernel.org/r/[email protected] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/boot: Avoid possible physmem_info segment corruption
When physical memory for the kernel image is allocated it does not
consider extra memory required for offsetting the image start to
match it with the lower 20 bits of KASLR virtual base address. That
might lead to kernel access beyond its memory range. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()`
When enabling UBSAN on Raspberry Pi 5, we get the following warning:
[ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3
[ 387.903868] index 7 is out of range for type '__u32 [7]'
[ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151
[ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched]
[ 387.932525] Call trace:
[ 387.935296] dump_backtrace+0x170/0x1b8
[ 387.939403] show_stack+0x20/0x38
[ 387.942907] dump_stack_lvl+0x90/0xd0
[ 387.946785] dump_stack+0x18/0x28
[ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0
[ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d]
[ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ 387.966862] process_one_work+0x62c/0xb48
[ 387.971296] worker_thread+0x468/0x5b0
[ 387.975317] kthread+0x1c4/0x1e0
[ 387.978818] ret_from_fork+0x10/0x20
[ 387.983014] ---[ end trace ]---
This happens because the UAPI provides only seven configuration
registers and we are reading the eighth position of this u32 array.
Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by
accessing only seven positions on the '__u32 [7]' array. The eighth
register exists indeed on V3D 7.1, but it isn't currently used. That
being so, let's guarantee that it remains unused and add a note that it
could be set in a future patch. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists()
We can trigger a slab-out-of-bounds with the following commands:
mkfs.ext4 -F /dev/$disk 10G
mount /dev/$disk /tmp/test
echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc
echo test > /tmp/test/file && sync
==================================================================
BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11
CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521
Call Trace:
dump_stack_lvl+0x2c/0x50
kasan_report+0xb6/0xf0
ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
ext4_mb_regular_allocator+0x19e9/0x2370 [ext4]
ext4_mb_new_blocks+0x88a/0x1370 [ext4]
ext4_ext_map_blocks+0x14f7/0x2390 [ext4]
ext4_map_blocks+0x569/0xea0 [ext4]
ext4_do_writepages+0x10f6/0x1bc0 [ext4]
[...]
==================================================================
The flow of issue triggering is as follows:
// Set s_mb_group_prealloc to 2147483647 via sysfs
ext4_mb_new_blocks
ext4_mb_normalize_request
ext4_mb_normalize_group_request
ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc
ext4_mb_regular_allocator
ext4_mb_choose_next_group
ext4_mb_choose_next_group_best_avail
mb_avg_fragment_size_order
order = fls(len) - 2 = 29
ext4_mb_find_good_group_avg_frag_lists
frag_list = &sbi->s_mb_avg_fragment_size[order]
if (list_empty(frag_list)) // Trigger SOOB!
At 4k block size, the length of the s_mb_avg_fragment_size list is 14,
but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds
to be triggered by an attempt to access an element at index 29.
Add a new attr_id attr_clusters_in_group with values in the range
[0, sbi->s_clusters_per_group] and declare mb_group_prealloc as
that type to fix the issue. In addition avoid returning an order
from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb)
and reduce some useless loops. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: rpi: Assign ->num before accessing ->hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
raspberrypi_discover_clocks() due to ->num being assigned after ->hws
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4
index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: PAC1934: fix accessing out of bounds array index
Fix accessing out of bounds array index for average
current and voltage measurements. The device itself has
only 4 channels, but in sysfs there are "fake"
channels for the average voltages and currents too. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate slices count returned by FW
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}' |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out
of bounds when writing data to the event_group array. If the number of
events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the
memory write overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/} |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: Avoid address calculations via out of bounds array indexing
Before request->channels[] can be used, request->n_channels must be set.
Additionally, address calculations for memory after the "channels" array
need to be calculated from the allocation base ("request") rather than
via the first "out of bounds" index of "channels", otherwise run-time
bounds checking will throw a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix invalid reads in fence signaled events
Correctly set the length of the drm_event to the size of the structure
that's actually used.
The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ensure the copied buf is NUL terminated
Currently, we allocate a count-sized kernel buffer and copy count bytes
from userspace to that buffer. Later, we use sscanf on this buffer but we
don't ensure that the string is terminated inside the buffer, this can lead
to OOB read when using sscanf. Fix this issue by using memdup_user_nul
instead of memdup_user. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Ensure the copied buf is NUL terminated
Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: marvell: a3700-comphy: Fix out of bounds read
There is an out of bounds read access of 'gbe_phy_init_fix[fix_idx].addr'
every iteration after 'fix_idx' reaches 'ARRAY_SIZE(gbe_phy_init_fix)'.
Make sure 'gbe_phy_init[addr]' is used when all elements of
'gbe_phy_init_fix' array are handled.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix mmhub client id out-of-bounds access
Properly handle cid 0x140. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Add some bounds checking to firmware data
Smatch complains about "head->full_size - head->header_size" can
underflow. To some extent, we're always going to have to trust the
firmware a bit. However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISCV: Fix panic on pmu overflow handler
(1 << idx) of int is not desired when setting bits in unsigned long
overflowed_ctrs, use BIT() instead. This panic happens when running
'perf record -e branches' on sophgo sg2042.
[ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[ 273.320851] Oops [#1]
[ 273.323179] Modules linked in:
[ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9
[ 273.332521] Hardware name: Sophgo Mango (DT)
[ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62
[ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e
[ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0
[ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978
[ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70
[ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000
[ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015
[ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a
[ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0
[ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210
[ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098
[ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca
[ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8
[ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d
[ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62
[ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee
[ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36
[ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e
[ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74
[ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92
[ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783
[ 273.477921] ---[ end trace 0000000000000000 ]---
[ 273.482630] Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wfx: fix memory leak when starting AP
Kmemleak reported this error:
unreferenced object 0xd73d1180 (size 184):
comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.245s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 1e 00 01 00 00 00 00 00 ................
backtrace:
[<5ca11420>] kmem_cache_alloc+0x20c/0x5ac
[<127bdd74>] __alloc_skb+0x144/0x170
[<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
[<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
[<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
[<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
[<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
[<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
[<47bd8b68>] genl_rcv_msg+0x198/0x378
[<453ef796>] netlink_rcv_skb+0xd0/0x130
[<6b7c977a>] genl_rcv+0x34/0x44
[<66b2d04d>] netlink_unicast+0x1b4/0x258
[<f965b9b6>] netlink_sendmsg+0x1e8/0x428
[<aadb8231>] ____sys_sendmsg+0x1e0/0x274
[<d2b5212d>] ___sys_sendmsg+0x80/0xb4
[<69954f45>] __sys_sendmsg+0x64/0xa8
unreferenced object 0xce087000 (size 1024):
comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.246s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<9a993714>] __kmalloc_track_caller+0x230/0x600
[<f83ea192>] kmalloc_reserve.constprop.0+0x30/0x74
[<a2c61343>] __alloc_skb+0xa0/0x170
[<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
[<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
[<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
[<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
[<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
[<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
[<47bd8b68>] genl_rcv_msg+0x198/0x378
[<453ef796>] netlink_rcv_skb+0xd0/0x130
[<6b7c977a>] genl_rcv+0x34/0x44
[<66b2d04d>] netlink_unicast+0x1b4/0x258
[<f965b9b6>] netlink_sendmsg+0x1e8/0x428
[<aadb8231>] ____sys_sendmsg+0x1e0/0x274
[<d2b5212d>] ___sys_sendmsg+0x80/0xb4
However, since the kernel is build optimized, it seems the stack is not
accurate. It appears the issue is related to wfx_set_mfp_ap(). The issue
is obvious in this function: memory allocated by ieee80211_beacon_get()
is never released. Fixing this leak makes kmemleak happy. |
