| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final. |
| vllm before 0.29.0 fails to enforce VLLM_MAX_AUDIO_CLIP_FILESIZE_MB limit in multimodal chat audio decoding, allowing unauthenticated clients to bypass file size restrictions. Attackers can submit oversized audio files through chat endpoints to consume excessive memory and CPU resources during decoding. |
| A weakness has been identified in TOTOLINK N150RT 3.4.0-B20201030. The affected element is the function system of the file /boafrm/formWlSiteSurvey of the component Web Management Interface. This manipulation of the argument wlanif causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.4.6 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper resource allocation limits in the GraphQL complexity calculation logic. |
| A vulnerability in the TLS library of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust the available memory of an affected device.
This vulnerability is due to improper management of memory resources during TLS connection setup. An attacker could exploit this vulnerability by repeatedly triggering the conditions that cause the memory increase. This could be done in a variety of ways, such as by repeatedly attempting Extensible Authentication Protocol (EAP) authentication when local EAP is enabled on an affected device or by using a machine-in-the-middle attack and resetting TLS connections between the affected device and other devices. A successful exploit could allow the attacker to exhaust the available memory on an affected device, resulting in an unexpected reload and a denial of service (DoS) condition. |
| containerd is an open-source container runtime. Prior to versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1, a crafted OCI index graph can force very high CPU/memory usage during PullImage (before container start), causing long ContainerCreating stalls and, at larger sizes, node/runtime instability. Versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1 fix the issue. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.9.0 until 4.14.7, wazuh-clusterd in framework/wazuh/core/cluster/common.py allocates a payload buffer using the size declared in a 20-byte cluster protocol header before Fernet decryption validates the peer. An unauthenticated network peer can declare a payload of up to 256 MiB, stop sending after the header, and retain that allocation until the TCP connection closes. The cluster listener has no application-level per-source connection budget in affected versions, allowing concurrent sockets to multiply memory consumption and potentially terminate the cluster process, disrupt synchronization, and interrupt distributed API forwarding. This issue is fixed in version 4.14.7. |
| A vulnerability was detected in Netcore NR289-GE 1.4.5102. This affects the function system of the file /set_ntp_server_ip.cgi of the component CGI Handler. The manipulation of the argument ntp_ip results in os command injection. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| mH-DEVELOPER smart home module is vulnerable to Denial of Service due to uncontrolled resource consumption. The Express bodyParser is configured with a 250 MB limit for JSON and URL-encoded request bodies. An authenticated attacker on the LAN can send large request bodies that exhausts buffers in RAM, causing out-of-memory conditions and crashing the fh-node process, resulting in denial of service. The successful attack depends on the current memory usage of the device which is not under full control of the attacker. Critically, due to CVE-2026-82930 all endpoints can be queried unauthenticated, so any user on LAN can perform this attack.
This issue was fixed in version 3.0.30 |
| A vulnerability was identified in Netcore NR289-GE 1.4.5102. This issue affects the function system of the file /ap_ip.cgi of the component CGI Handler. Such manipulation of the argument ip leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Multiple vulnerabilities exist in the Analytics and Location Engine (ALE) that may allow for unauthorized access or denial of service. An unauthenticated remote attacker could exploit these vulnerabilities by sending specially crafted input or leveraging improper security configurations. Successful exploitation could result in a denial of service condition or unauthorized access to sensitive information. |
| A command injection vulnerability exists in the web-based management interface of HPE Networking EdgeConnect SD-WAN Gateways. An authenticated remote attacker with limited access privileges could exploit this vulnerability through specially crafted input. Successful exploitation, under certain conditions, could result in the execution of arbitrary commands with elevated privileges or a denial-of-service condition on the affected appliance. |
| A command injection vulnerability exists in the command line interface of EdgeConnect SD-WAN Gateways. Successful exploitation could allow an authenticated remote attacker with high privileges to execute arbitrary commands on the underlying operating system leading to complete system compromise. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.4.6 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper resource allocation limits in the GraphQL complexity calculation logic. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's NE relocation fixup-chain parser was vulnerable because the NE relocation parser followed fixup chains without an active iteration limit or cycle detection. The vulnerability is triggered by opening a crafted NE executable whose in-bounds relocation entry points back to itself instead of reaching 0xffff. The parser repeatedly processed the same relocation and allocated another relocation object on each iteration. This can cause denial of service through continuous CPU and memory consumption. This issue is fixed in version 6.2.0. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Windows 64-bit crash-dump dmp64 parser was vulnerable because the Windows dmp64 parser used an input-controlled physical-memory-run PageCount directly as the bound of a per-page allocation loop. The vulnerability is triggered by opening a small crafted full-memory Windows crash dump. The parser repeatedly allocated and appended page descriptors without validating the count against the dump size. This can cause denial of service through excessive memory consumption and processing time. This issue is fixed in version 6.2.0. |
| A vulnerability was found in aaPanel BaoTa up to 11.8.0. Impacted is the function merge_split_file of the file /www/server/panel/class/files.py of the component File Merge Handler. Performing a manipulation of the argument split_file_path results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Netcore NBR200V2 1.3.241127.071246. Affected is the function system of the file /usr/bin/network_tools of the component Tools Ping Handler. Performing a manipulation of the argument url results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Netcore NBR200V2 1.3.241127.071246. This impacts the function eval of the file /www/cgi-bin/network_tools of the component Web Management Interface. Such manipulation of the argument QUERY_STRING leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
