Export limit exceeded: 424706 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (366 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-79148 | 1 Google | 1 Chrome | 2026-08-31 | 9.1 Critical |
| Off-by-one error in DevTools in Google Chrome prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to potentially read memory inside the sandbox via a crafted Chrome extension. (Chromium security severity: Low) | ||||
| CVE-2026-80612 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: lwtunnel: Drop skb metadata before LWT encapsulation skb metadata is meant for passing information between XDP and TC. It lives in the skb headroom, immediately before skb->data. LWT programs cannot access the __sk_buff->data_meta pseudo-pointer to metadata. However, LWT encapsulation prepends outer headers, moving skb->data back over the headroom where the metadata sits. On an RX-originated (forwarded) packet that still carries XDP metadata this goes wrong in two different ways, depending on the encap type: 1. Non-BPF LWT encaps (mpls, seg6, ioam6 ...) call skb_push()/skb_pull() and silently overwrite the metadata that sits in the headroom. 2) BPF LWT xmit calls bpf_skb_change_head(), which uses skb_data_move(). That helper expects metadata immediately before skb->data. But since the IP output path runs LWT xmit before neighbour output has built the outgoing L2 header, for forwarded packets skb->data points at the L3 header while skb_mac_header() still points at the old L2 header. skb_data_move() sees metadata ending at skb_mac_header(), not before skb->data, warns and clears metadata: WARNING: CPU: 21 PID: 454557 at include/linux/skbuff.h:4609 skb_data_move+0x47/0x90 CPU: 21 UID: 0 PID: 454557 Comm: napi/iconduit-g Tainted: G O 6.18.21 #1 RIP: 0010:skb_data_move+0x47/0x90 Call Trace: <IRQ> bpf_skb_change_head+0xe6/0x1a0 bpf_prog_...+0x213/0x2e3 run_lwt_bpf.isra.0+0x1d3/0x360 bpf_xmit+0x46/0xe0 lwtunnel_xmit+0xa1/0xf0 ip_finish_output2+0x1e7/0x5e0 ip_output+0x63/0x100 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x2b/0x190 net_rx_action+0x40b/0x7f0 handle_softirqs+0xd2/0x270 do_softirq+0x3f/0x60 </IRQ> That is what happens, as for how to fix it - a received packet that carries metadata can reach an encap through any of the three LWT redirect modes: LWTUNNEL_STATE_INPUT_REDIRECT ip6_rcv_finish dst_input lwtunnel_input LWTUNNEL_STATE_OUTPUT_REDIRECT ip6_rcv_finish dst_input ip6_forward ip6_forward_finish dst_output lwtunnel_output LWTUNNEL_STATE_XMIT_REDIRECT ip6_rcv_finish dst_input ip6_forward ip6_forward_finish dst_output ip6_output ip6_finish_output ip6_finish_output2 lwtunnel_xmit Every encap funnels through the three LWT dispatch helpers, so drop the metadata there, right before handing the skb to the encap op. This single chokepoint covers all encap types and all three redirect modes: - lwtunnel_input(): seg6, rpl, ila, seg6_local - lwtunnel_output(): ioam6 - lwtunnel_xmit(): mpls, LWT BPF xmit Alternatively, we could clear the metadata right after TC ingress hook. That would require a compromise, however. Metadata would become inaccessible from TC egress (in setups where it actually reaches the hook it tact, that is without any L2 tunnels on path). | ||||
| CVE-2026-46369 | 1 Nimiq | 1 Core-rs-albatross | 2026-08-27 | 7.5 High |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Through 1.5.0, the validity store uses a strict lower-bound comparison that expires a stored transaction too early relative to Transaction::is_valid_at, allowing a remote attacker to replay the same signed transaction during a blocks_per_batch minus one block window and cause the sender and recipient balances to be updated twice. This issue is fixed in version 1.5.1. | ||||
| CVE-2026-65927 | 1 Apache | 1 Tomcat | 2026-08-27 | 7.5 High |
| Off-by-one Error vulnerability in Apache Tomcat impacting the [N] flag on the rewrite valves causes rewrite processing to restart at the second rule rather than the first rule. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121 which fix the issue. | ||||
| CVE-2026-68767 | 1 Hashcat | 1 Hashcat | 2026-08-26 | 6.1 Medium |
| hashcat's fgetl() function in src/filehandling.c writes a null terminator one byte past the caller's buffer when an input line is exactly the buffer length. Attackers can trigger this out-of-bounds heap write by providing a hash file, potfile, or wordlist containing a line of exactly HCBUFSIZ_LARGE bytes. | ||||
| CVE-2026-63387 | 1 Libevent Project | 1 Libevent | 2026-08-25 | 7 High |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has an off-by-one stack buffer overflow in evdns.c when dnsname_to_labels formats a name-bearing DNS record at the end of the 64 KB stack buffer allocated by evdns_server_request_format_response. The final-label check permits j plus label_len plus one to equal buf_len, after which the terminating null byte is written to buf[buf_len]. A crafted DNS server response containing PTR, CNAME, MX, NS, or SOA data can trigger the one-byte out-of-bounds write and crash or corrupt the process. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. | ||||
| CVE-2026-43964 | 1 Postfix | 1 Postfix | 2026-08-20 | 3.7 Low |
| Postfix before 3.8.16, 3.9 before 3.9.10, and 3.10 before 3.10.9 sometimes allows a buffer over-read and process crash via an enhanced status code that lacks text after the third number. | ||||
| CVE-2026-66806 | 2 Microsoft, Redhat | 7 365 Apps, Office 2019, Office 2021 and 4 more | 2026-08-14 | 5.5 Medium |
| Off-by-one error in Microsoft Office Word allows an unauthorized attacker to disclose information locally. | ||||
| CVE-2026-53309 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison The local-vs-remote region comparison loop uses '<=' instead of '<', causing it to read one entry past the valid range of qr_regions. The other loops in the same function correctly use '<'. Fix the loop condition to use '<' for consistency and correctness. | ||||
| CVE-2026-14899 | 1 Mozilla | 1 Thunderbird | 2026-08-12 | 7.5 High |
| The code to parse MIME headers for display when forwarding a message (if the setting to view all headers was enabled) had an off-by-one error, allowing a single byte to be read from the memory after the buffer for the headers, and potentially crashing Thunderbird. This vulnerability was fixed in Thunderbird 153 and Thunderbird 140.13. | ||||
| CVE-2026-54410 | 1 Debevv | 1 Nanomodbus | 2026-08-10 | 8.6 High |
| nanoMODBUS through v1.23.0 contains an off-by-one buffer overflow in the recv_msg_header function of the Modbus/TCP server that allows remote unauthenticated attackers to write one attacker-controlled byte past the end of the 260-byte receive buffer by sending a crafted MBAP frame whose Length field is set to 255. | ||||
| CVE-2024-56720 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Several fixes to bpf_msg_pop_data Several fixes to bpf_msg_pop_data, 1. In sk_msg_shift_left, we should put_page 2. if (len == 0), return early is better 3. pop the entire sk_msg (last == msg->sg.size) should be supported 4. Fix for the value of variable "a" 5. In sk_msg_shift_left, after shifting, i has already pointed to the next element. Addtional sk_msg_iter_var_next may result in BUG. | ||||
| CVE-2024-56663 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one Since the netlink attribute range validation provides inclusive checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one. One crash stack for demonstration: ================================================================== BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 Read of size 6 at addr 001102080000000c by task fuzzer.386/9508 CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_report+0xe0/0x750 mm/kasan/report.c:398 kasan_report+0x139/0x170 mm/kasan/report.c:495 kasan_check_range+0x287/0x290 mm/kasan/generic.c:189 memcpy+0x25/0x60 mm/kasan/shadow.c:65 ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline] nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453 genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd Update the policy to ensure correct validation. | ||||
| CVE-2024-53192 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated with the `counted_by()` attribute. This means that when memory is allocated for this array, the _counter_, which in this case is member `num` in the flexible structure, should be set to the maximum number of elements the flexible array can contain, or fewer. In this case, the total number of elements for the flexible array is determined by variable `clks_num` when allocating heap space via `devm_kzalloc()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); So, `clp->clk_data.num` should be set to `clks_num` or less, and not exceed `clks_num`, as is currently the case. Otherwise, if data is written into `clp->clk_data.hws[clks_num]`, the instrumentation provided by the compiler won't detect the overflow, leading to a memory corruption bug at runtime. Fix this issue by setting `clp->clk_data.num` to `clks_num`. | ||||
| CVE-2024-47682 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix off-by-one error in sd_read_block_characteristics() Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for example), sd_read_block_characteristics() may attempt an out-of-bounds memory access when accessing the zoned field at offset 8. | ||||
| CVE-2024-26766 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Unfortunately the commit `fd8958efe877` introduced another error causing the `descs` array to overflow. This reults in further crashes easily reproducible by `sendmsg` system call. [ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI [ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1] -- [ 1080.974535] Call Trace: [ 1080.976990] <TASK> [ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1] [ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1] [ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1] [ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib] [ 1081.046978] dev_hard_start_xmit+0xc4/0x210 -- [ 1081.148347] __sys_sendmsg+0x59/0xa0 crash> ipoib_txreq 0xffff9cfeba229f00 struct ipoib_txreq { txreq = { list = { next = 0xffff9cfeba229f00, prev = 0xffff9cfeba229f00 }, descp = 0xffff9cfeba229f40, coalesce_buf = 0x0, wait = 0xffff9cfea4e69a48, complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>, packet_len = 0x46d, tlen = 0x0, num_desc = 0x0, desc_limit = 0x6, next_descq_idx = 0x45c, coalesce_idx = 0x0, flags = 0x0, descs = {{ qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63) }, { qw = { 0x3800014231b108, 0x4} }, { qw = { 0x310000e4ee0fcf0, 0x8} }, { qw = { 0x3000012e9f8000, 0x8} }, { qw = { 0x59000dfb9d0000, 0x8} }, { qw = { 0x78000e02e40000, 0x8} }} }, sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62) complete = 0x0, priv = 0x0, txq = 0xffff9cfea4e69880, skb = 0xffff9d099809f400 } If an SDMA send consists of exactly 6 descriptors and requires dword padding (in the 7th descriptor), the sdma_txreq descriptor array is not properly expanded and the packet will overflow into the container structure. This results in a panic when the send completion runs. The exact panic varies depending on what elements of the container structure get corrupted. The fix is to use the correct expression in _pad_sdma_tx_descs() to test the need to expand the descriptor array. With this patch the crashes are no longer reproducible and the machine is stable. | ||||
| CVE-2026-11771 | 1 Openvpn | 1 Openvpn | 2026-07-30 | 7.5 High |
| OpenVPN version 2.1.0 through 2.6.20 and 2.7_alpha1 through 2.7.4 allows attackers via an off-by-one buffer write in the NTLM proxy authentication to potentially cause a crash via a crafted NTLM response from a malicious proxy server | ||||
| CVE-2025-38600 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan() The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS elements so this >= needs to be > to prevent an out of bounds access. | ||||
| CVE-2025-37893 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix off-by-one error in build_prologue() Vincent reported that running BPF progs with tailcalls on LoongArch causes kernel hard lockup. Debugging the issues shows that the JITed image missing a jirl instruction at the end of the epilogue. There are two passes in JIT compiling, the first pass set the flags and the second pass generates JIT code based on those flags. With BPF progs mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the first pass and then generates N+1 insns in the second pass. This makes epilogue_offset off by one and we will jump to some unexpected insn and cause lockup. Fix this by inserting a nop insn. | ||||
| CVE-2025-23150 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix off-by-one error in do_split Syzkaller detected a use-after-free issue in ext4_insert_dentry that was caused by out-of-bounds access due to incorrect splitting in do_split. BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847 CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154 make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455 ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796 ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431 vfs_symlink+0x137/0x2e0 fs/namei.c:4615 do_symlinkat+0x222/0x3a0 fs/namei.c:4641 __do_sys_symlink fs/namei.c:4662 [inline] __se_sys_symlink fs/namei.c:4660 [inline] __x64_sys_symlink+0x7a/0x90 fs/namei.c:4660 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The following loop is located right above 'if' statement. for (i = count-1; i >= 0; i--) { /* is more than half of this entry in 2nd half of the block? */ if (size + map[i].size/2 > blocksize/2) break; size += map[i].size; move++; } 'i' in this case could go down to -1, in which case sum of active entries wouldn't exceed half the block size, but previous behaviour would also do split in half if sum would exceed at the very last block, which in case of having too many long name files in a single block could lead to out-of-bounds access and following use-after-free. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||