| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor
scx_bypass() claims bypass dispatch when the scheduler's depth goes from
zero to one and releases it when the depth returns to zero, but propagates
only the depth to the descendants, not the claim. A descendant that starts
bypassing with its ancestor never claims, and one whose own bypass ends
under the ancestor's keeps its claim, as its depth does not return to zero.
A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its
claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next
bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that
starts under a PM suspend has no claim, so once the resume lifts the root's
bypass its tasks sit on the parent's bypass DSQs with nobody consuming them.
Claim for every descendant whose depth goes from zero to one in the
propagation and release every scheduler in the subtree whose depth returned
to zero once the tasks have moved out of the bypass DSQs. A parent that is
bypassing itself when a descendant claims consumes only its own bypass DSQs,
empty until it leaves bypass and becomes the host. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject SetEA requests that do not fit the request buffer
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len > buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
...
if (size > MAX_EA_VALUE_SIZE)
CIFSMaxBufSize is the full payload capacity of the buffer, so a value
of exactly that size leaves no room for the SMB header, the TRANS2
parameter block, the fealist header and the EA name that are written
ahead of it in the same object.
SendReceive() already enforces the correct limit on this very length:
if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
but it is called after the copy has taken place. An unprivileged
setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte
value writes 16384 bytes starting 345 bytes into a 16588-byte
cifs_request object, ending 141 bytes past it:
BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0
Write of size 16384 at addr ffff888003aa0159 by task init/68
__asan_memcpy+0x3c/0x60
CIFSSMBSetEA+0xabc/0xde0
cifs_xattr_set+0xd3a/0xff0
__vfs_setxattr+0x13e/0x1a0
The buggy address is located 345 bytes inside of
allocated 16588-byte region
Apply SendReceive()'s limit to the assembled request before the copy
rather than after it, and widen the byte counters so the sum cannot
wrap before it is tested.
byte_count is also tested against U16_MAX, because it is stored in the
16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is
raised at module load, where it may be set as high as 1024*127: with a
5-byte EA name and a 65521-byte value, count is exactly U16_MAX while
byte_count is 65556, and cpu_to_le16() would truncate it to 20 and
transmit a frame whose ByteCount does not match its length. Testing
byte_count covers count as well, since byte_count is the larger of the
two and count's only 16-bit consumer is written after this point.
check_add_overflow() is evaluated first so that total_len is assigned
before it is reported. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in
smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION,
that is the whole of struct object_id_info, but writes only 46 of them:
- objid[] is 16 bytes, and when the volume UUID is not available only
sizeof(stfs.f_fsid) (8) bytes are copied into it;
- extended_info.version_string[] is STRING_LENGTH (28) bytes, and only
strlen("1.1.0") (5) bytes are copied into it.
The response buffer is zeroed on allocation (kvzalloc() in
smb2_allocate_rsp_buf()), so for a standalone request the remaining 31
bytes are zero. In a compound request they need not be. The offset of
the next response is advanced by the length pinned for the previous one,
so if a preceding command wrote its reply into the buffer and then
failed, smb2_set_err_rsp() pins only the short error response and the
next reply lands inside the area that has already been written. Only
the header is cleared there:
memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2);
The client then receives up to 31 bytes of a response it was not meant
to see, including one that failed with an access denied error.
Clear the structure before filling it in. As a side effect
version_string is now NUL terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION,
that is the whole of struct smb2_fs_control_info, but never assigns
FileSystemControlFlags. Those four bytes go to the client as they are
found in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
ksmbd does not implement quota tracking, so report no control flags. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Free the eventfs_inode after an rcu grace period too
tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that
dentry->d_fsdata points to, and ->d_revalidate() is called in rcu
pathwalk mode with nothing but rcu_read_lock() held. The dentry itself
stays around for such a walker, but tracefs_d_release() drops its
reference to the eventfs_inode when the dentry is killed, and
release_ei() then frees it after a grace period of eventfs_srcu. An
SRCU grace period doesn't wait for rcu_read_lock() sections, so the
walker can read an eventfs_inode that is already gone.
With a pathwalk held up in tracefs_d_revalidate() while the dentry goes
away:
BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90
Read of size 1 at addr ff1100010152d8d0 by task walker/97
Call Trace:
<TASK>
tracefs_d_revalidate+0x76/0x90
lookup_fast+0x320/0x640
path_lookupat+0x160/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
__kmalloc_cache_noprof+0x249/0x560
eventfs_create_dir+0x7a/0x590
event_create_dir+0x2fb/0xcf0
trace_add_event_call+0xbf/0x150
[...]
Freed by task 11:
kfree+0x1db/0x5b0
srcu_invoke_callbacks+0x3a3/0x620
process_one_work+0x937/0x1810
worker_thread+0x4f1/0xd60
Before commit 8e556432477e ("eventfs: Use SRCU for freeing
eventfs_inodes") release_ei() used call_rcu(), which covered the walker,
while eventfs_iterate() needs the SRCU grace period. Wait for both and
chain call_rcu() from the SRCU callback. |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: prevent mark additions during connector teardown
fsnotify_destroy_marks() keeps a reference to its current mark while it
drops conn->lock to destroy the mark. This stabilizes the forward-walk
cursor, but does not prevent a new mark from being inserted before it.
For example, an inotify watch re-added after IN_IGNORED sorts before the
old, detached mark for the same group. The walk can miss the replacement
and then detach the entire connector from the object.
The replacement is still on its group's marks_list and, for inotify, in
the watch IDR. The group mutex no longer protects the connector's object
from disappearing. An unprivileged fdinfo read racing the final detach
can consequently call igrab(NULL):
BUG: KASAN: null-ptr-deref in igrab+0x24/0x100
Write of size 4 at addr 0000000000000148
Call Trace:
igrab+0x24/0x100
inotify_show_fdinfo+0x1dc/0x5e0
seq_show+0x397/0x690
Set a DESTROYING flag under conn->lock before starting the walk, and
reject new marks on that connector with -ENOENT. The existing add-mark
error paths undo the temporary group-list entry and the backend's watch
allocation. Do not wait for teardown while holding the group mutex,
which the destroyer needs. Once the old connector is detached, an add
can install a fresh connector as before.
This closes the insertion race for all object types using the common
connector teardown, without changing the mark reference or SRCU lifetime
rules. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context
An async #PF "page not present" event arrives through the #PF vector,
and its reason sits in the per-CPU apf_reason.flags until
__kvm_handle_async_pf() reads and clears it. If an NMI arrives after
the event is injected and before the #PF handler reads the flags, and
the NMI handler itself takes a #PF, that fault reads and clears the
flags belonging to the #PF it interrupted. It then finds interrupts
disabled in the NMI context it interrupted, and panics:
Kernel panic - not syncing: Host injected async #PF in interrupt
disabled region
Call Trace:
<NMI>
panic+0x52/0x60
__kvm_handle_async_pf+0xb0/0xb0
exc_page_fault+0x71/0xb0
asm_exc_page_fault+0x27/0x30
RIP: 0010:__get_user_nocheck_8+0x6/0x20
perf_callchain_user+0x147/0x1a0
get_perf_callchain+0x12d/0x1c0
...
perf_event_nmi_handler+0x26/0x50
exc_nmi+0xe8/0x110
RIP: 0010:asm_exc_page_fault+0x0/0x30
</NMI>
The last RIP line shows the NMI landing on the first instruction of
the #PF entry. perf with user call chains takes such a fault: the
sampling NMI walks the user stack with __get_user(), which faults when
a saved frame pointer is not a valid user address or the walk runs off
the top of the stack. The same window exists when KVM, running as an
L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after
a #PF VM-exit.
The NMI entry code saves and restores CR2 for this nesting, but not the
async #PF reason. Andy Lutomirski described the race, with perf as the
example, when async #PF delivery was reworked in 2020 [1]. Saving and
clearing the flags across the NMI, next to CR2, was discussed there but
not merged.
Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS,
so the host delivers "page not present" only for user mode faults and
a kernel-mode fault in NMI context (including kernel-mode #MC and #DB)
cannot be an async page fault. In that case, return without touching
the flags so that the interrupted handler finds them intact.
Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot
whose memory is served on demand through userfaultfd, so that reading
it back takes async #PFs, while every thread samples hardware cycles
with user call chains and points its frame pointer at an unmapped page.
Without this patch the guest panicked as above in 3 of 3 runs. With it,
the guest survived 3 of 3 runs of 60 seconds, and the host counted
148,441 to 153,334 kvm_async_pf_not_present events in the first 20
seconds of each. On 6.18.50 the results were the same: the guest
panicked without the patch and survived with it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture
When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono
capture stream, such as a SmartMic, aggregated across multiple SDW
links), step = ch_count / blob->alh_cfg.device_count truncates to 0.
The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to
UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds
exponent:
UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13
shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int'
Treat ch_count < device_count the same way as the existing "channels
equal to output reference channels" case: apply the same ch_mask to
every aggregated device instead of trying to split channels that
can't be evenly divided. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix BPF token permission checks
Avoid multiple lookups of the bpffs creator SID using the token's file
descriptor when the same information can be found via the resolved
path/dentry (in selinux_bpf_token_create()) or the token itself (in
selinux_bpf_map_create() and selinux_bpf_prog_load()). Not only does
this simplify the code, it avoids potential TOCTOU issues if the user
changes the token file descriptor passed into the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: don't update i_size in cifs_do_truncate without a cached handle
If find_writable_file() returns null, cifs_file_flush will return
0 without issuing set_file_size, and the outer 'if (!rc)' block
will set i_size to 0 before telling the server to truncate. If
the cifs_open() then fails, the inode will have size 0, while
the server file is unchanged.
Move the netfs_resize_file() and cifs_setsize() into the 'if
(cfile)', so they only run after a successful set_file_size.
In the no-handle else branch, evict stale pages with
truncate_inode_pages before the O_TRUNC open to dispose of old
cache pages, and let the open response set the i_size. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: prevent unregistering a power supply while a callback runs
Once a power supply is registered, its callbacks can immediately start
firing from other contexts, such as external_power_changed() triggered by
the TCPM stack. If a power supply is unregistered while the callback is
still running, the driver data can already be freed when the callback
tries to access it, leading to a use-after-free.
This happens e.g. when the hardware bus carrying the power supply device
malfunctions (e.g. I2C is hogged down by another malfunctioning device)
immediately after the power supply is registered, and thus the core is
still processing the callbacks which were queued up when the driver
starts the removal, leading in some cases to a kernel crash, e.g.:
[ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005
[ 11.646751] Mem abort info:
[ 11.647006] ESR = 0x0000000096000004
[ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits
[ 11.647806] SET = 0, FnV = 0
[ 11.648077] EA = 0, S1PTW = 0
[ 11.648356] FSC = 0x04: level 0 translation fault
[ 11.648785] Data abort info:
[ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0
[ 11.650390] [0000000000000005] user address but active_mm is swapper
[ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP
[ 11.651460] Modules linked in:
[ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT
[ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT)
[ 11.653024] Workqueue: events power_supply_changed_work
[ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100
[ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8
[ 11.655098] sp : ffff80008192bb30
[ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000
[ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28
[ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62
[ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000
[ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000
[ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590
[ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0
[ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000
[ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000
[ 11.661878] Call trace:
[ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P)
[ 11.662596] __power_supply_am_i_supplied+0x40/0xb8
[ 11.663040] psy_for_each_psy_cb+0x20/0x40
[ 11.663416] class_for_each_device+0x110/0x150
[ 11.663825] power_supply_am_i_supplied+0x68/0x100
[ 11.664262] bq257xx_external_power_changed+0x58/0x140
[ 11.664733] __power_supply_changed_work+0x60/0x80
[ 11.665170] psy_for_each_psy_cb+0x20/0x40
[ 11.665545] class_for_each_device+0x110/0x150
[ 11.665953] power_supply_changed_work+0x98/0x1b8
[ 11.666382] process_one_work+0x164/0x4c0
[ 11.666758] worker_thread+0x19c/0x320
[ 11.667104] kthread+0x138/0x150
[ 11.667408] ret_from_fork+0x10/0x20
[ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34)
[ 11.668294] ---[ end trace 0000000000000000 ]---
Add a read-write semaphore between external_power_changed() and
power_supply_unregister() to prevent the latter from returning (and thus
the driver from freeing its data) while the callback is still running. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: reset skb headers before unicast and multicast filtering
Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to
an skb's network and MAC headers. Netlink producers may reserve
headroom without resetting those headers, allowing a receiving socket's
filter to read data before the initialized message.
For example, IWPM HELLO replies are allocated with dev_alloc_skb(),
which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can
attach a classic socket filter and disclose this headroom through the
length of the delivered reply. The resets in netlink_dump() do not help
because IWPM sends a separately allocated skb through netlink_unicast().
Reset both headers before running the receiver's filter in unicast and
broadcast delivery, as is already done for dump skbs. This also covers
other netlink producers that reserve headroom without changing their
allocation or message-building code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: skip eviction of a BO with no resource
xe_evict_flags() switches on tbo->resource->mem_type to choose an
eviction placement. An xe BO can reach eviction with no ttm.resource,
e.g. an imported dma-buf BO whose resource was freed during teardown
while its attachment is still live: the exporter then invalidates it via
xe_dma_buf_move_notify() -> xe_bo_evict(), and the switch dereferences a
NULL resource and faults.
A BO with no resource has nothing placed or mapped, so there is nothing
to evict. Return an empty placement (num_placement = 0), mirroring the
handling already used for non-xe scatter-gather BOs just above;
ttm_bo_validate() then takes the pipeline-gutting path and returns 0.
Without the fix the xe_dma_buf@xe_test_dmabuf_move_notify_no_resource
dynamic live selftest will fail with below stack.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:xe_evict_flags+0xf4/0x140 [xe]
Call Trace:
<TASK>
xe_bo_evict+0x40/0xa0 [xe]
? ttm_bo_pipeline_gutting+0x71/0x180 [ttm]
xe_test_dmabuf_move_notify_no_resource+0x182/0x440 [xe]
xe_dma_buf_kunit+0x387/0x580 [xe]
v2: Add Fixes tag and failure info in commit text (Matt Brost)
(cherry picked from commit dbcfaac6331f1fcb0c2fe3ad3e9adb1e5d43ec0c) |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: avoid hashing the network namespace pointer
The netlink rhashtable key includes a raw struct net pointer and a
user-controlled port ID. Both /proc/net/netlink and socket diagnostics
expose the table's bucket order. By binding and rebinding chosen
NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal
buckets and recover the low bits of the Jenkins hash. Its 32-bit seed
and the limited set of kernel-image slides can then be searched offline
to recover the address of init_net.
Use the namespace's unique, non-address net_cookie in the comparison
key instead. It is assigned before the per-net initializers run and
remains unchanged for the namespace's lifetime. The lookup key and
object hash are still built by netlink_compare_arg_init(), keeping
lookup, insertion, removal and rehashing consistent while preserving
namespace separation. Neither public table walker needs to change.
Reading the socket's namespace cookie in netlink_compare() is safe
under RCU, including during namespace teardown. netlink_release()
removes the socket from the hash table and defers its final put with
call_rcu(). cleanup_net() runs the per-net exit methods and waits for
outstanding RCU callbacks with rcu_barrier() before freeing namespace
storage.
Unlike ns.ns_id, net_cookie is also available and initialized during
setup_net() in older stable kernels, making the change straightforward
to backport to v5.15 and later. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hisilicon: hisi_femac: Move setting of netops to fix crash
hisi_femac_drv_probe() connects the PHY before dev->netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
phy_link_topo_add_phy from phy_attach_direct+0xec/0x37c
of_phy_get_and_connect from hisi_femac_drv_probe+0x1f4/0x558
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
watch_queue: Fix note pool publication race in watch_queue_set_size()
There is a race between watch_queue_set_size() and post_one_notification().
watch_queue_set_size() publishes wqueue->notes, notes_bitmap, nr_pages and
nr_notes with plain stores, and post_one_notification() reads them with
plain loads under a different lock, so nothing orders the four stores
against the poster's loads: depending on the build, notes can be stored
last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch
attach to a queue before it is sized, post_one_notification() can already
be running on another CPU at that moment: it reads nr_notes > 0, passes
its bounds check, and then reads notes while it is still NULL,
dereferencing notes[0].
An unprivileged user triggers this reliably by watching one of its own
keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE)
on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU,
triggering:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0
Call Trace:
__post_watch_notification+0x148/0x180
keyctl_setperm_key+0x119/0x130
do_syscall_64+0x108/0x4c0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by publishing nr_notes last with smp_store_release(), and by
reading it once with smp_load_acquire() in post_one_notification() before
the bitmap and the page array are touched. A poster that observes a
non-zero nr_notes then also observes the pool behind it; one that observes
zero drops the notification as before. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix uninitialized trans dereference in CM event handler
rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA
device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device
type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but
the event switch dereferences it: unconditionally in the
RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(),
and (with a connection context) in the ROUTE_RESOLVED and
ESTABLISHED cases.
An RDS listener on an iWARP device therefore crashes the kernel as
soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO
the wild load becomes a NULL dereference at offset 0xa0
(&trans->cm_handle_connect) in the iw_cm_wq workqueue.
GCC masks the bug in default builds by folding the uninitialized
load into &rds_ib_transport; Clang-built kernels take the real
uninitialized path and oops.
The active side can land on a non-IB device too: the id that
rds_ib_conn_path_connect() creates is not restricted to a node type,
so rdma_resolve_addr() binds it to whichever device serves the local
address, and an iWARP RNIC on the same netdev qualifies. The crash
there is different: resolving a route on an iWARP id never fills in
cm_id->route.path_rec, and the ROUTE_RESOLVED case writes
path_rec[0].sl before it calls into the transport.
The iWARP transport was dropped long ago and IB is the only
transport left, so make that explicit: initialize trans to
&rds_ib_transport at declaration, drop the conditional assignment,
reject a connect request that arrives on a non-IB device, and drop a
connection whose address resolved to one instead of resolving a
route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST
on purpose: a non-zero return from the handler makes rdma_cm destroy
the id the event was delivered on, which is right for the request's
freshly created id but would free a connection id that RDS still owns
for any other event. On the active side the id stays ic->i_cm_id and
the connection's shutdown destroys it, so that case returns 0.
[achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of
bailing out for every event on a non-IB device, so that rdma_cm does
not destroy connection ids RDS still tracks; drop a connection whose
address resolved to a non-IB device before a route is resolved on it;
changelog adjusted] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate firmware record lengths
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver state. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: propagate reparse index insertion failure
update_reparse_data() ignores the return value of
set_reparse_index(). When index insertion fails, the code removes
the just-written reparse data as cleanup but still returns 0, so
symlink(2) (and WSL special file creation) reports success while
no reparse data exists on disk. When there was no previous reparse
data (oldsize == 0), the failure was likewise silently ignored.
Propagate the error to the caller. |
