Export limit exceeded: 26153 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421045 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63848 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) | ||||
| CVE-2026-63847 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) | ||||
| CVE-2026-63846 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) | ||||
| CVE-2026-63845 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) | ||||
| CVE-2026-63825 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist. | ||||
| CVE-2026-53401 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: omap2: fix use-after-free in omapfb_mmap omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that can lead to use-after-free: The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock), while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock. This allows concurrent execution. In omapfb_mmap(): 1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref 2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region 3. len = fix->smem_len; // Read from NEW region 4. vm_iomap_memory(vma, start, len); // Map NEW region memory 5. atomic_inc(&rg->map_count); // Increment OLD region! Concurrently, OMAPFB_SETUP_PLANE can: - Reassign ofbi->region = new_rg - Update fix->smem_len - OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it This leaves userspace with a mapping to freed physical memory. The fix is to read all required values (start, len) from the same region reference (rg) that will have its map_count incremented, preventing the region from being freed while still mapped. | ||||
| CVE-2026-53377 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: always recover the gpu Previously, in case there was no more work to do, recover worker wouldn't trigger recovery and would instead rely on the gpu going to sleep and then resuming when more work is submitted. Recover_worker will first increment the fence of the hung ring so, if there's only one job submitted to a ring and that causes an hang, it will early out. There's no guarantee that the gpu will suspend and resume before more work is submitted and if the gpu is in a hung state it will stay in that state and probably trigger a timeout again. Just stop checking and always recover the gpu. Patchwork: https://patchwork.freedesktop.org/patch/704066/ | ||||
| CVE-2026-53368 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion with the checkpoint path, which can result in an incorrect inode block marking state. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes - f2fs_sync_node_pages - f2fs_fsync_node_pages // no dirty node - f2fs_need_inode_block_update // return true - f2fs_fsync_node_pages // inode dirtied - f2fs_need_dentry_mark //return true - f2fs_flush_nat_entries - f2fs_write_checkpoint end - __write_node_folio // inode with DENT_BIT_SHIFT set SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The state observed by f2fs_need_dentry_mark() can differ from the state observed in __write_node_folio() after acquiring sbi->node_write. The root cause is that the semantics of IS_CHECKPOINTED and HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has fully completed. This patch moves set_dentry_mark() into __write_node_folio() and protects it with the sbi->node_write lock. | ||||
| CVE-2026-53330 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval() [Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) | ||||
| CVE-2026-53292 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via pn_socket_autobind(): kernel BUG at net/phonet/socket.c:213! RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline] RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421 Call Trace: sock_sendmsg_nosec+0x112/0x150 net/socket.c:797 __sock_sendmsg net/socket.c:812 [inline] __sys_sendto+0x402/0x590 net/socket.c:2280 ... pn_socket_autobind() calls pn_socket_bind() with port 0 and, on -EINVAL, assumes the socket was already bound and asserts that the port is non-zero: err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn)); if (err != -EINVAL) return err; BUG_ON(!pn_port(pn_sk(sock->sk)->sobject)); return 0; /* socket was already bound */ However pn_socket_bind() also returns -EINVAL when sk->sk_state is not TCP_CLOSE, even when the socket has never been bound and pn_port() is still 0. In that case the BUG_ON() fires and panics the kernel from a user-triggerable path. Treat the "bind returned -EINVAL but pn_port() is still 0" case as a regular error and propagate -EINVAL to the caller instead of crashing. Existing callers already translate a non-zero return from pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here only changes behaviour from panic to a normal errno. | ||||
| CVE-2026-53284 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: only release the dirty pages io tree after successful writes [WARNING] With extra warning on dirty extent buffers at umount (aka, the next patch in the series), test case generic/388 can trigger the following warning about dirty extent buffers at unmount time: BTRFS critical (device dm-2 state E): emergency shutdown BTRFS error (device dm-2 state E): error while writing out transaction: -30 BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction. BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30) BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem BTRFS info (device dm-2 state EA): forced readonly BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c ------------[ cut here ]------------ WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368 CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs] Call Trace: <TASK> close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] generic_shutdown_super+0x89/0x1a0 kill_anon_super+0x16/0x40 btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] deactivate_locked_super+0x2d/0xb0 cleanup_mnt+0xdc/0x140 task_work_run+0x5a/0xa0 exit_to_user_mode_loop+0x123/0x4b0 do_syscall_64+0x243/0x7c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7 I'm using a stripped down version, which seems to trigger the warning more reliably: _fsstress_pid="" workload() { dmesg -C mkfs.btrfs -f -K $dev > /dev/null echo 1 > /sys/kernel/debug/clear_warn_once mount $dev $mnt $fsstress -w -n 1024 -p 4 -d $mnt & _fsstress_pid=$! sleep 0 $godown $mnt pkill --echo -PIPE fsstress > /dev/null wait $_fsstress_pid unset _fsstress_pid umount $mnt if dmesg | grep -q "WARNING"; then fail fi } for (( i = 0; i < $runtime; i++ )); do echo "=== $i/$runtime ===" workload done [CAUSE] Inside btrfs_write_and_wait_transaction(), we first try to write all dirty ebs, then wait for them to finish. After that we call btrfs_extent_io_tree_release() to free all extent states from dirty_pages io tree. However if we hit an error from btrfs_write_marked_extent(), then we still call btrfs_extent_io_tree_release() to clear that dirty_pages io tree, which may contain dirty records that we haven't yet submitted. Furthermore, the later transaction cleanup path will utilize that dirty_pages io tree to properly cleanup those dirty ebs, but since it's already empty, no dirty ebs are properly cleaned up, thus will later trigger the warnings inside invalidate_btree_folios(). ---truncated--- | ||||
| CVE-2026-53267 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c | ||||
| CVE-2026-53262 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl() pppol2tp_ioctl() read sock->sk->sk_user_data directly without any locks or reference counting. If a controllable sleep was induced during copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent socket close could trigger pppol2tp_session_close() asynchronously. This frees the l2tp_session structure via the l2tp_session_del_work workqueue. Upon resuming, the ioctl thread dereferences the stale session pointer, resulting in a Use-After-Free (UAF). Fix this by securely fetching the session reference using the RCU-safe, refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the session's refcount across the sleep. We structured the function to exit via standard err breaks, guaranteeing that l2tp_session_put() is cleanly called on all return paths to drop the reference. To preserve existing behavior we validate the session and its magic signature only for the specific L2TP commands that require it. This ensures that generic/unknown ioctls called on an unconnected socket still return -ENOIOCTLCMD and correctly fall back to generic handlers (e.g. in sock_do_ioctl()). | ||||
| CVE-2026-53232 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: clean the sfp upstream if phy probing fails Sashiko reported that we don't call sfp_bus_del_upstream() in the probe failure path, so let's add it, otherwise the sfp-bus is left with a dangling 'upstream' field, that may be used later on during SFP events. This issue existed before the generic phylib sfp support, back when drivers were calling phy_sfp_probe themselves. | ||||
| CVE-2026-53230 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max. | ||||
| CVE-2026-53229 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed. | ||||
| CVE-2026-53224 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded INIT chunk and address list lengths in cookie sctp_unpack_cookie() only checked that the embedded INIT chunk length did not exceed the remaining cookie payload, but did not ensure that the INIT chunk is large enough to contain a complete INIT header. A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose length field is smaller than sizeof(struct sctp_init_chunk). Later, sctp_process_init() accesses INIT parameters unconditionally, which may lead to out-of-bounds reads. In addition, raw_addr_list_len is not fully validated against the remaining cookie payload. When cookie authentication is disabled, an attacker can supply an oversized raw_addr_list_len and cause sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The address parser also lacks sufficient bounds checks for parameter headers and lengths, allowing malformed address parameters to trigger out-of-bounds reads. Fix this by: - requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk); - validating that the INIT chunk and raw address list together fit within the cookie payload; - verifying sufficient data exists for each address parameter header and payload before parsing it. Note that sctp_verify_init() must be called after sctp_unpack_cookie() and before sctp_process_init() when cookie authentication is disabled. This will be addressed in a separate patch. | ||||
| CVE-2026-53122 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between reflink and transaction commit when using flushoncommit When using the flushoncommit mount option, we can have a deadlock between a transaction commit and a reflink operation that copied an inline extent to an offset beyond the current i_size of the destination node. The deadlock happens like this: 1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page(); 2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc; 3) The delalloc flushing sees the new dirty folio of inode Y and when it attempts to flush it, it ends up at extent_writepage() and sees that the offset of the folio is beyond the i_size of inode Y, so it attempts to invalidate the folio by calling folio_invalidate(), which ends up at btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it tries to lock the folio's range in inode Y's extent io tree, but it blocks since it's currently locked by task A - during a reflink we lock the inodes and the source and destination ranges after flushing all delalloc and waiting for ordered extent completion - after that we don't expect to have dirty folios in the ranges, the exception is if we have to copy an inline extent's data (because the destination offset is not zero); 4) Task A then attempts to start a transaction to update the inode item, and then it's blocked since the current transaction is in the TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the current transaction to become unblocked (its state >= TRANS_STATE_UNBLOCKED). So task A is waiting for the transaction commit done by task B, and the later waiting on the extent lock of inode Y that is currently held by task A. Syzbot recently reported this with the following stack traces: INFO: task kworker/u8:7:1053 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-46) Call Trace: <TASK> context_switch kernel/sched/core.c:5298 [inline] __schedule+0x1553/0x5240 kernel/sched/core.c:6911 __schedule_loop kernel/sched/core.c:6993 [inline] schedule+0x164/0x360 kernel/sched/core.c:7008 wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704 extent_writepage fs/btrfs/extent_io.c:1852 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline] btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713 do_writepages+0x32e/0x550 mm/page-writeback.c:2554 __writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750 writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042 wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227 wb_do_writeback fs/fs-writeback.c:2374 [inline] wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414 process_one_work kernel/workqueue.c:3276 [inline] process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.4.64:6910 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.64 state:D stack:22752 pid:6910 tgid: ---truncated--- | ||||
| CVE-2026-53076 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix OOB in pcpu_init_value An out-of-bounds read occurs when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the same value_size that is not rounded up to 8 bytes. The issue happens when: 1. A CGROUP_STORAGE map is created with value_size not aligned to 8 bytes (e.g., 4 bytes) 2. A pcpu map is created with the same value_size (e.g., 4 bytes) 3. Update element in 2 with data in 1 pcpu_init_value assumes that all sources are rounded up to 8 bytes, and invokes copy_map_value_long to make a data copy, However, the assumption doesn't stand since there are some cases where the source may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data. the verifier verifies exactly the size that the source claims, not the size rounded up to 8 bytes by kernel, an OOB happens when the source has only 4 bytes while the copy size(4) is rounded up to 8. | ||||
| CVE-2026-53070 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: disable BH before calling udp_tunnel_xmit_skb() udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to tunnel xmit functions"), on the path: udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit() dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU. Without local_bh_disable(), the context may move between CPUs, which can break the inc/dec pairing. This may lead to incorrect recursion level detection and cause packets to be dropped in ip(6)_tunnel_xmit() or __dev_queue_xmit(). Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths. In my testing, after enabling the SCTP over UDP: # ip net exec ha sysctl -w net.sctp.udp_port=9899 # ip net exec ha sysctl -w net.sctp.encap_port=9899 # ip net exec hb sysctl -w net.sctp.udp_port=9899 # ip net exec hb sysctl -w net.sctp.encap_port=9899 # ip net exec ha iperf3 -s - without this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender [ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver - with this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver | ||||