Export limit exceeded: 381667 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 381667 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3039 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-65010 | 2026-04-15 | N/A | ||
| WODESYS WD-R608U router (also known as WDR122B V2.0 and WDR28) is vulnerable to Broken Access Control in initial configuration wizard.cgi endpoint. Malicious attacker can change admin panel password without authorization. The vulnerability can also be exploited after the initial configuration has been set. The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version WDR28081123OV1.01 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable. | ||||
| CVE-2025-53118 | 1 Securden | 1 Unified Pam | 2026-04-15 | 9.8 Critical |
| An authentication bypass vulnerability exists which allows an unauthenticated attacker to control administrator backup functions, leading to compromise of passwords, secrets, and application session tokens stored by the Unified PAM. | ||||
| CVE-2025-30126 | 1 Marbella | 1 Kr8s Dashcam | 2026-04-15 | 5.3 Medium |
| An issue was discovered on Marbella KR8s Dashcam FF 2.0.8 devices. Via port 7777 without any need to pair or press a physical button, a remote attacker can disable recording, delete recordings, or even disable battery protection to cause a flat battery to essentially disable the car from being used. During the process of changing these settings, there are no indications or sounds on the dashcam to alert the dashcam owner that someone else is making those changes. | ||||
| CVE-2025-36535 | 1 Automationdirect | 1 Mb Gateway | 2026-04-15 | 10 Critical |
| The embedded web server lacks authentication and access controls, allowing unrestricted remote access. This could lead to configuration changes, operational disruption, or arbitrary code execution depending on the environment and exposed functionality. | ||||
| CVE-2025-59097 | 1 Dormakaba | 1 Access Manager | 2026-04-15 | N/A |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps. This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication: - Re-configure Access Managers (e.g. remove alarming system requirements) - Freely re-configure the inputs and outputs - Open all connected doors permanently - Open all doors for a defined time interval - Change the admin password - and many more Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. | ||||
| CVE-2024-23815 | 1 Siemens | 1 Desigo Cc | 2026-04-15 | 7.5 High |
| A vulnerability has been identified in Desigo CC (All versions if access from Installed Clients to Desigo CC server is allowed from networks outside of a highly protected zone), Desigo CC (All versions if access from Installed Clients to Desigo CC server is only allowed within highly protected zones). The affected server application fails to authenticate specific client requests. Modification of the client binary could allow an unauthenticated remote attacker to execute arbitrary SQL queries on the server database via the event port (default: 4998/tcp) | ||||
| CVE-2023-6215 | 1 Hp | 2 Hp, Sure Start Ifd Protection | 2026-04-15 | N/A |
| A potential security vulnerability has been identified in HP Sure Start’s protection of the Intel Flash Descriptor in certain HP PC products, which might allow security bypass, arbitrary code execution, loss of integrity or confidentiality, or denial of service. HP is releasing BIOS updates to mitigate the potential vulnerability. | ||||
| CVE-2025-12548 | 1 Redhat | 1 Openshift Devspaces | 2026-04-15 | 9 Critical |
| A flaw was found in Eclipse Che che-machine-exec. This vulnerability allows unauthenticated remote arbitrary command execution and secret exfiltration (SSH keys, tokens, etc.) from other users' Developer Workspace containers, via an unauthenticated JSON-RPC / websocket API exposed on TCP port 3333. | ||||
| CVE-2025-3232 | 1 Mitsubishielectric | 1 Smartrtu | 2026-04-15 | 7.5 High |
| A remote unauthenticated attacker may be able to bypass authentication by utilizing a specific API route to execute arbitrary OS commands. | ||||
| CVE-2024-1491 | 2026-04-15 | 7.5 High | ||
| The devices allow access to an unprotected endpoint that allows MPFS file system binary image upload without authentication. The MPFS2 file system module provides a light-weight read-only file system that can be stored in external EEPROM, external serial flash, or internal flash program memory. This file system serves as the basis for the HTTP2 web server module, but is also used by the SNMP module and is available to other applications that require basic read-only storage capabilities. This can be exploited to overwrite the flash program memory that holds the web server's main interfaces and execute arbitrary code. | ||||
| CVE-2025-1701 | 2026-04-15 | N/A | ||
| CVE-2025-1701 is a high-severity vulnerability in the MIM Admin service. An attacker could exploit this vulnerability by sending a specially crafted request over the RMI interface to execute arbitrary code with the privileges of the MIM Admin service. The RMI interface is only accessible locally (listening on 127.0.0.1), limiting the attack vector to the local machine. This means that in a properly configured hospital environment, an attacker must have already compromised the network and additionally compromised the system where the MIM Admin service is running. From there, attackers with sufficient knowledge of MIM's implementation, library usage, and functionality with access to extend the MIM RMI library could force the MIM Admin service to run commands on the local machine with its privileges. Users of MIM Software products exposed via RDP or multi-user application virtualization system should take note that the system being exposed is the environment hosting the virtualized MIM client. This issue affects MIM Admin Service: before 7.2.13, 7.3.8, 7.4.3 | ||||
| CVE-2025-9983 | 2026-04-15 | N/A | ||
| GALAYOU G2 cameras stream video output via RTSP streams. By default these streams are protected by randomly generated credentials. However these credentials are not required to access the stream. Changing these values does not change camera's behavior. The vendor did not respond in any way. Only version 11.100001.01.28 was tested, other versions might also be vulnerable. | ||||
| CVE-2025-41090 | 1 Ccn-cert | 1 Microclaudia | 2026-04-15 | N/A |
| microCLAUDIA in v3.2.0 and prior has an improper access control vulnerability. This flaw allows an authenticated user to perform unauthorized actions on other organizations' systems by sending direct API requests. To do so, the attacker can use organization identifiers obtained through a compromised endpoint or deduced manually. This vulnerability allows access between tenants, enabling an attacker to list and manage remote assets, uninstall agents, and even delete vaccines configurations. | ||||
| CVE-2025-3699 | 2026-04-15 | 9.8 Critical | ||
| Missing Authentication for Critical Function vulnerability in Mitsubishi Electric Corporation G-50 all versions, G-50-W all versions, G-50A all versions, GB-50 all versions, GB-50A all versions, GB-24A all versions, G-150AD all versions, AG-150A-A all versions, AG-150A-J all versions, GB-50AD all versions, GB-50ADA-A all versions, GB-50ADA-J all versions, EB-50GU-A all versions, EB-50GU-J all versions, AE-200J all versions, AE-200A all versions, AE-200E all versions, AE-50J all versions, AE-50A all versions, AE-50E all versions, EW-50J all versions, EW-50A all versions, EW-50E all versions, TE-200A all versions, TE-50A all versions, TW-50A all versions, and CMS-RMD-J all versions allows a remote unauthenticated attacker to bypass authentication and then control the air conditioning systems illegally, or disclose information in them by exploiting this vulnerability. In addition, the attacker may tamper with firmware for them using the disclosed information. | ||||
| CVE-2024-51362 | 1 Lsc Smart Connect | 1 Indoor Camera Firmware | 2026-04-15 | 6.5 Medium |
| The LSC Smart Connect Indoor IP Camera V7.6.32 is vulnerable to an information disclosure issue where live camera footage can be accessed through the RTSP protocol on port 8554 without requiring authentication. This allows unauthorized users with network access to view the camera's feed, potentially compromising user privacy and security. No credentials or special permissions are required, and access can be gained remotely over the network. | ||||
| CVE-2023-5935 | 2026-04-15 | 7.4 High | ||
| When configuring Arc (e.g. during the first setup), a local web interface is provided to ease the configuration process. Such web interface lacks authentication and may thus be abused by a local attacker or malware running on the machine itself. A malicious local user or process, during a window of opportunity when the local web interface is active, may be able to extract sensitive information or change Arc's configuration. This could also lead to arbitrary code execution if a malicious update package is installed. | ||||
| CVE-2025-9971 | 1 Planet | 1 Planet | 2026-04-15 | 9.8 Critical |
| Certain models of Industrial Cellular Gateway developed by Planet Technology have a Missing Authentication vulnerability, allowing unauthenticated remote attackers to manipulate the device via a specific functionality. | ||||
| CVE-2020-37146 | 1 Ace Security | 1 Aptina Ar0130 960p 1.3mp Camera | 2026-04-15 | 7.5 High |
| ACE Security WiP-90113 HD Camera contains a configuration disclosure vulnerability that allows unauthenticated attackers to retrieve sensitive configuration files. Attackers can access the camera's configuration backup by sending a GET request to the /config_backup.bin endpoint, exposing credentials and system settings. | ||||
| CVE-2025-27256 | 2026-04-15 | 8.3 High | ||
| Missing Authentication for Critical Function vulnerability in GE Vernova Enervista UR Setup application allows Authentication Bypass due to a missing SSH server authentication. Since the client connection is not authenticated, an attacker may perform a man-in-the-middle attack on the network. | ||||
| CVE-2025-7405 | 1 Mitsubishi Electric | 1 Melsec Iq-f Series | 2026-04-15 | 7.3 High |
| Missing Authentication for Critical Function vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series CPU module allows a remote unauthenticated attacker to read or write the device values of the product and stop the operation of the programs, since MODBUS/TCP in the products does not have authentication features. | ||||