| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the gRPC code of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the emsd service stops. The vulnerability is due to the software's inability to process HTTP/2 packets. An attacker could exploit this vulnerability by sending a malformed HTTP/2 frame to the affected device. A successful exploit could allow the attacker to create a DoS condition when the emsd service stops. Cisco Bug IDs: CSCvb99388. |
| A vulnerability in 802.11 association request frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient frame validation of the 802.11 association request. An attacker could exploit this vulnerability by sending a malformed 802.11 association request to the targeted device. An exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve12189. |
| A vulnerability in conditional, verbose debug logging for the IPsec feature of Cisco IOS XE Software could allow an authenticated, local attacker to display sensitive IPsec information in the system log file. The vulnerability is due to incorrect implementation of IPsec conditional, verbose debug logging that causes sensitive information to be written to the log file. This information should be restricted. An attacker who has valid administrative credentials could exploit this vulnerability by authenticating to the device and enabling conditional, verbose debug logging for IPsec and viewing the log file. An exploit could allow the attacker to access sensitive information related to the IPsec configuration. Cisco Bug IDs: CSCvf12081. |
| A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314. |
| A vulnerability in the web-based management interface of Cisco Unified Contact Center Express could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf09173. |
| Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| A vulnerability in the web-based management interface of Cisco NetFlow Generation Appliance could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. More Information: CSCvb15229. Known Affected Releases: 1.0(2). |
| A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198. |
| A vulnerability in the IOS daemon (IOSd) web-based management interface of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the web-based management interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf60862. |
| A vulnerability in the H.264 decoder function of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a Cisco Meeting Server media process to restart unexpectedly when it receives an illegal H.264 frame. The vulnerability is triggered by an H.264 frame that has an invalid picture parameter set (PPS) value. An attacker could exploit this vulnerability by sending a malformed H.264 frame to the targeted device. An exploit could allow the attacker to cause a denial of service (DoS) condition because the media process could restart. The media session should be re-established within a few seconds, during which there could be a brief interruption in service. Cisco Bug IDs: CSCvg12559. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to read the contents of arbitrary files. The vulnerability is due to insufficient input validation for a specific CLI command. An attacker could exploit this vulnerability by issuing a crafted command on the CLI. An exploit could allow the attacker unauthorized access to read arbitrary files on the underlying local file system. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to read files from any VDC. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51707, CSCve93961, CSCve93964, CSCve93965, CSCve93968, CSCve93974, CSCve93976. |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, and Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99925, CSCvf15164, CSCvf15167, CSCvf15170, CSCvf15173. |
| A vulnerability in Cisco Umbrella Insights Virtual Appliances 2.1.0 and earlier could allow an authenticated, local attacker to log in to an affected virtual appliance with root privileges. The vulnerability is due to the presence of default, static user credentials for an affected virtual appliance. An attacker could exploit this vulnerability by using the hypervisor console to connect locally to an affected system and then using the static credentials to log in to an affected virtual appliance. A successful exploit could allow the attacker to log in to the affected appliance with root privileges. Cisco Bug IDs: CSCvg31220. |
| A vulnerability in the guest shell feature of Cisco NX-OS System Software could allow an authenticated, local attacker to read and send packets outside the scope of the guest shell container. An attacker would need valid administrator credentials to perform this attack. The vulnerability is due to insufficient internal security measures in the guest shell feature. An attacker could exploit this vulnerability by sending or receiving packets on the device-internal network outside of the guest shell container, aka "Unauthorized Internal Interface Access." This vulnerability affects the following products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvf33038. |
| A vulnerability in the web-based management interface of Cisco Jabber for Windows, Mac, Android, and iOS could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf50378, CSCvg56018. |
| A vulnerability in Cisco Jabber for Windows could allow an unauthenticated, local attacker to access sensitive communications made by the Jabber client. An attacker could exploit this vulnerability to gain information to conduct additional attacks. The vulnerability is due to the way Cisco Jabber for Windows handles random number generation for file folders. An attacker could exploit the vulnerability by fixing the random number data used to establish Secure Sockets Layer (SSL) connections between clients. An exploit could allow the attacker to decrypt secure communications made by the Cisco Jabber for Windows client. Cisco Bug IDs: CSCve44806. |
| A vulnerability in the detection engine parsing of Pragmatic General Multicast (PGM) protocol packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the Snort process unexpectedly restarting. The vulnerability is due to improper input validation of the fields in the PGM protocol packet. An attacker could exploit this vulnerability by sending a crafted PGM packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability affects Cisco Firepower System Software that has one or more file action policies configured and is running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series with FirePOWER Services; Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls; Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances; Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances; Firepower 4100 Series Security Appliances; FirePOWER 7000 Series Appliances; FirePOWER 8000 Series Appliances; Firepower 9300 Series Security Appliances; FirePOWER Threat Defense for Integrated Services Routers (ISRs); Industrial Security Appliance 3000; Sourcefire 3D System Appliances; Virtual Next-Generation Intrusion Prevention System (NGIPSv) for VMware. Fixed versions: 5.4.0.10 5.4.1.9 6.0.1.3 6.1.0 6.2.0. Cisco Bug IDs: CSCuz00876. |
| Multiple Cisco embedded devices use hardcoded X.509 certificates and SSH host keys embedded in the firmware, which allows remote attackers to defeat cryptographic protection mechanisms and conduct man-in-the-middle attacks by leveraging knowledge of these certificates and keys from another installation, aka Bug IDs CSCuw46610, CSCuw46620, CSCuw46637, CSCuw46654, CSCuw46665, CSCuw46672, CSCuw46677, CSCuw46682, CSCuw46705, CSCuw46716, CSCuw46979, CSCuw47005, CSCuw47028, CSCuw47040, CSCuw47048, CSCuw47061, CSCuw90860, CSCuw90869, CSCuw90875, CSCuw90881, CSCuw90899, and CSCuw90913. |
