| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: avoid potential null folio->mapping deref during error reporting
When a buffered read fails, iomap_finish_folio_read() reports the error
with fserror_report_io(folio->mapping->host, ...). This is called after
ifs->read_bytes_pending has been decremented by the bytes attempted to
be read.
For a folio split across multiple read completions, the folio is only
guaranteed to stay locked while read_bytes_pending > 0. Once
iomap_finish_folio_read() decrements read_bytes_pending, another
in-flight read can complete and end the read on the folio, which unlocks
it. This allows truncate logic to run and detach the folio (set
folio->mapping to NULL). The error reporting path then can dereference a
NULL folio->mapping. As reported by Sam Sun, this is the race that can
occur:
CPU0: failed completion CPU1: final completion CPU2: truncate
----------------------- ---------------------- --------------
read_bytes_pending -= len
finished = false
/* preempted before
fserror_report_io() */
read_bytes_pending -= len
finished = true
folio_end_read()
truncate clears
folio->mapping
fserror_report_io(
folio->mapping->host, ...)
^ NULL deref
Fix this by reporting the error first before decrementing
ifs->read_bytes_pending. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/migration: Fix livelock in tmigr_handle_remote_up()
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject oversized EMA RNR lists
nl80211_parse_rnr_elems() stores the parsed element count in a
u8-backed cfg80211_rnr_elems::cnt field and uses that count to size
the flexible array allocation.
Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches
255, before incrementing it again. This keeps the parser aligned with
the data structure it fills and matches the existing bound check used
by nl80211_parse_mbssid_elems(). |
| Gogs is an open source self-hosted Git service. In 0.14.3 and earlier, any authenticated user can watch a private repository they have no access to, because the access check in the Watch API handler is inverted. The code checks if repoCtx.ViewerCanRead() (returns 404 when the user CAN read) instead of if !repoCtx.ViewerCanRead() (return 404 when the user CANNOT read). Once watching, the attacker's dashboard activity feed shows commit messages, branch names, issue titles, and PR details from the private repository. If email notifications are enabled, the attacker also receives emails containing issue and comment content. |
| An improper restriction of operations within the bounds of a memory buffer vulnerability in Portwell Engineering Toolkits version 4.8.2 could allow a local authenticated attacker to read and write to arbitrary memory via the Portwell Engineering Toolkits driver. Successful exploitation of this vulnerability could result in escalation of privileges or cause a denial-of-service condition. |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, Gogs has an unauthenticated information disclosure vulnerability. The GET /api/v1/orgs/:orgname/teams endpoint at internal/route/api/v1/org_team.go:8 returns all teams for any organization without requiring authentication. The route group at internal/route/api/v1/api.go:380-385 lacks the reqToken() middleware, and the listTeams() handler performs no authentication check, exposing team IDs, names, descriptions, and permission levels to any unauthenticated caller. This vulnerability is fixed in 0.14.3. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, the ImageElement component in packages/gazzodown renders user-controlled src values directly into <a href> and <img src> attributes without protocol sanitization. Unlike the analogous LinkSpan component — which uses sanitizeUrl to block javascript:, data:, and vbscript: protocols — ImageElement passes the raw URL through unchanged. An authenticated user can post a markdown image with a javascript: URL that, if clicked on an older browser, would execute arbitrary JavaScript in the viewer's session. This vulnerability is fixed in 8.5.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix DMA address corruption due to find_vma misuse
fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.
Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix arithmetic issues in dma_length()
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller. |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, Git smart HTTP authorizes POST …/git-receive-pack using the client-supplied service query string (so ?service=git-upload-pack is evaluated as read access) while routing still runs git receive-pack, allowing push where only read should be allowed. This vulnerability is fixed in 0.14.3. |
| Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have pre-authentication SQL Injection via unanchored FILTER_VALIDATE_REGEXP in graph_view.php. This issue has been fixed in version 1.2.31. |
| An issue in the time_t_to_dt component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex(). |
| In the Linux kernel, the following vulnerability has been resolved:
futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock
When FUTEX_CMP_REQUEUE_PI requeues a non-top waiter that already owns the
target PI futex, task_blocks_on_rt_mutex() returns -EDEADLK before setting
waiter->task.
The subsequent remove_waiter() in rt_mutex_start_proxy_lock() dereferences
the NULL waiter->task, causing a kernel crash.
Add a self-deadlock check for non-top waiters before calling
rt_mutex_start_proxy_lock(), analogous to the top-waiter check in
futex_lock_pi_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix use-after-free race in fastrpc_map_create
fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The
caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero)
on this unprotected pointer. A concurrent MEM_UNMAP can free the map
between the lock release and the kref operation, resulting in a
use-after-free on the freed slab object.
Restore the take_ref parameter to fastrpc_map_lookup so the reference
is acquired atomically under fl->lock before the pointer is exposed to
the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix abuse of kprobe_write_ctx via freplace
uprobe programs are allowed to modify struct pt_regs.
Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.
For example,
SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}
SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}
freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.
Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.
To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
md: wake raid456 reshape waiters before suspend
During raid456 reshape, direct IO across the reshape position can sleep
in raid5_make_request() waiting for reshape progress while still
holding an active_io reference. If userspace then freezes reshape and
writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io
and waits for all in-flight IO to drain.
This can deadlock: the IO needs reshape progress to continue, but the
reshape thread is already frozen, so the active_io reference is never
dropped and suspend never completes.
raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do
the same for normal md suspend when reshape is already interrupted, so
waiting raid456 IO can abort, drop its reference, and let suspend
finish.
The mdadm test tests/25raid456-reshape-deadlock reproduces the hang. |
