| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, crafted IPv4 and IPv6 address pairs can collide in the IPPair hash because src/ippair.c did not compare the IP address family before reusing IPPair-backed state. This can apply state from one IP family to another for xbits track ip_pair, FTP data expectations, and, on the 7.0 release line, thresholding, detection_filter, and rate_filter rules using track by_both, causing incorrect detection state. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, the Windows service installation and parameter-update logic in src/win32-service.c can pass an unquoted service ImagePath to CreateServiceA. When Suricata is installed below a path containing spaces and an earlier path component is writable by a local low-privileged attacker, Windows can execute an attacker-controlled program as LocalSystem, resulting in local privilege escalation. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 7.0.0 until 7.0.17 and 8.0.6, the MQTT parser in rust/src/mqtt/mqtt.rs permits repeated PUBREC or PUBREL messages to be appended to one transaction without a limit. Crafted MQTT traffic can grow transaction state indefinitely, consuming CPU and memory and causing slowdown or denial of service. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 7.0.13 until 7.0.17, the SMTP MIME quoted-printable decoder in src/util-decode-mime.c can read one byte past a heap buffer when a quoted-printable escape sequence is split across traffic chunks and the following chunk contains exactly one byte. Crafted SMTP traffic can trigger the out-of-bounds read and crash Suricata when decode-quoted-printable MIME decoding is enabled. This issue is fixed in version 7.0.17. |
| Use after free in Microsoft Office Word allows an authorized attacker to disclose information locally. |
| A security vulnerability in HPE OneView may be exploited remotely to perform session hijacking, data theft or other unauthorized actions. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, Versions prior to 5.36, contains a Download of Code Without Integrity Check vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Code execution, Information disclosure, Information tampering, and Protection mechanism bypass. |
| In SettingsLib, there is a possible way to disable system components due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of AccessibilityManagerService.java, there is a possible persistent denial of service due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In onChange of BiometricService.java, there is a possible way to enable fingerprint unlock due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In updateProvidersWhenServiceRemoved of CredentialManagerService.java, there is a possible way to override settings across users due to a permissions bypass. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| adm-zip before 0.5.18 is vulnerable to denial of service via a crafted ZIP file with a manipulated uncompressed size header field. In zipEntry.js line 103, Buffer.alloc(_centralHeader.size) allocates memory based on the declared uncompressed size from the ZIP central directory header without validating it against the actual compressed data size or imposing any upper bound. The size value is read directly from the binary header at entryHeader.js line 266 with no bounds check. An attacker can craft a ~120-byte ZIP file that declares ~4GB uncompressed size, causing a memory allocation amplification ratio of over 33 million to 1. The allocation occurs before CRC validation, so the malicious payload cannot be rejected early. All extraction and read methods are affected: readFile(), readAsText(), extractEntryTo(), extractAllTo(), extractAllToAsync(), test(), and entry.getData(). Any application accepting untrusted ZIP files via adm-zip is vulnerable to immediate process crash. |
| Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in elixir-mint mint allows a malicious HTTP/1 server to desynchronize an intermediary and the Mint client on a pooled connection, poisoning the responses to subsequent requests that share the connection.
message_body/1 in lib/mint/http1.ex selects chunked framing when chunked is the first coding listed in a response's Transfer-Encoding fields. RFC 9112 section 6.3 applies chunked framing only when chunked is the final coding, and otherwise reads the body until the server closes the connection. For a response such as Transfer-Encoding: chunked, gzip, an intermediary that follows the RFC treats every byte up to the close as the body, while Mint ends the body at the zero-length chunk and parses the remaining bytes as the response to the next request on the connection.
Mint also keeps the connection open after an HTTP/1.0 response, final or 1xx, that carries Transfer-Encoding and Connection: keep-alive. RFC 9112 section 6.1 requires treating the framing of such a message as faulty and closing the connection after it, so bytes after its chunked body are parsed as the response to the next request in the same way.
This issue affects mint: from 0.1.0 before 1.10.2. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.
Mint.HTTP2.Frame.decode_next/2 in lib/mint/http2/frame.ex compares a frame with the client's max_frame_size (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns :more, and Mint.HTTP2 keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.
This issue affects mint: from 0.1.0 before 1.10.2. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to exhaust memory on the client host and cause a denial of service.
Mint.HTTP2 enforces the client's max_header_list_size setting only on the compressed size of an inbound header block, while RFC 9113 section 6.5.2 defines the limit on the decoded header list. An HPACK indexed field costs one byte on the wire and decodes to a dynamic table entry of up to 4 KB, and join_cookie_headers/1 in lib/mint/http2.ex copies every cookie value of a response into one new binary. A header block under the default 256 KB wire limit therefore makes the client allocate about 1 GB for a single response, and several such responses in one delivery exhaust the memory of the process that owns the connection or of the whole VM.
This issue affects mint: from 1.1.0 before 1.10.2. |
| A vulnerability in HPE OneView can be remotely exploited to cause a URL redirect. |
| Ghostscript for Windows is vulnerable to local privilege escalation through PostScript resource file hijacking. Due to the application searching for PostScript resource files in predictable paths under C:\\gs\\ that do not exist by default on Windows installations, combined with Windows default ACLs allowing any authenticated user to create directories at the root of C:\\, an attacker who is an authenticated local user can create the expected directory structure and plant a malicious PostScript file. When any user or service subsequently runs Ghostscript, the planted file is automatically loaded and executed with the full privileges of the Ghostscript process. This results in full compromise of Ghostscript process context, as well as running arbitrary code on the machine with Ghostscript process privileges.
This issue was fixed in version 10.08.0. |
| Das U-Boot with CONFIG_IP_DEFRAG=y parameter fails to clear IP reassembly state after delivering a complete datagram. An attacker who can deliver fragmented IP traffic can execute arbitrary code by sending duplicated last-fragment IP packets.
This issue was fixed in commit b1aec609bb5e0d08c25c888c91935287ab4ee5fa in version 2026.07. |
| GestSup versions before 3.2.62 contain a stored cross-site scripting vulnerability in the IMAP OAuth connector that double-decodes MIME-encoded email subjects after HTML escaping. Unauthenticated attackers can send crafted emails to monitored mailboxes with nested MIME encoded-words to inject JavaScript that executes in technician sessions when viewing tickets. |
| A vulnerability was determined in CodeCanyon Rocket LMS up to 2.2. This affects an unknown function of the component Student Profile Image Upload. Executing a manipulation can lead to cross site scripting. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
