| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb()
If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine,
mt7996 driver leaks an already allocated tx token. Fix the issue
releasing the token in case of error. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: reject inverted service ranges from peer bindings
tipc_update_nametbl() inserts a binding advertised by a peer node using
the lower and upper service-range bounds taken directly from the wire,
without checking that lower <= upper. The local bind path validates the
ordering (tipc_uaddr_valid()), but the name-distribution path does not.
A binding with lower > upper is inserted at the far end of the
service-range rbtree (keyed on lower) where no lookup or withdrawal can
ever match it (service_range_foreach_match() requires sr->lower <= end).
The publication, its service_range node and the augmented rbtree entry
are then leaked for the lifetime of the namespace, and there is no
per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings.
Reject inverted ranges in the network path as well. A peer node can
otherwise leak unbounded binding-table memory by sending PUBLICATION
items with lower > upper. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix netns teardown to cancel the preallocation charger
Fix the teardown of an afs network namespace to make sure it cancels the
work item that keeps the preallocated rxrpc call/conn/peer queue charged
before incoming calls are disabled (i.e. listen 0).
Also, if net->live is false because the afs netns is being deleted, make
afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid
requeuing the charger.
(This was found by AI review). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: reset read_slot when reusing r10bio for discard
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure
mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with
mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path
through mlx5r_umr_unmap_free_xlt().
After mlx5_odp_populate_xlt() became fallible, its error path returned
directly and skipped that cleanup. This leaks the XLT DMA mapping and
buffer. If the emergency XLT page was used, it also leaves
xlt_emergency_page_mutex locked.
Break out of the loop so execution falls through the existing cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
The sg_cleanup error path used list[i] instead of list[j] when unmapping
DMA buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Handle layout stid in nfsd4_drop_revoked_stid()
nfsd4_drop_revoked_stid() has no SC_TYPE_LAYOUT case, so when a
client sends FREE_STATEID for an admin-revoked layout stid, the
default branch releases cl_lock and returns without unhashing or
releasing the stid. The stid remains in the IDR and on the
per-client list until the client is destroyed.
Remove the layout stid from the per-client list and call
nfs4_put_stid() to drop the creation reference. When the
refcount reaches zero, nfsd4_free_layout_stateid() handles the
remaining cleanup: cancelling the fence worker, removing from
the per-file list, and freeing the slab object. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: aa_label_alloc use aa_label_free on alloc failure
aa_label_alloc() allocates a secid before allocating or taking the label
proxy. If the later proxy step fails, the error path only freed the label
memory, leaking any resources initialized by aa_label_init().
Use aa_label_free() on the failure path so partially initialized labels
release their secid and other label resources before the backing memory is
freed. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: drain continuation descs after overflow in xsk_build_skb()
Fix generic xmit path multi-buffer logic when packets are either too big
(count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is
included in fragmented packet. Introduce xdp_sock::drain_cont and act
upon this flag - when it is set, keep on consuming descriptors from
AF_XDP Tx ring and put them directly onto Cq. Previously these
descriptors were silently lost and could never be reached again. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: reclaim invalid Tx descriptors in ZC batch path
The zero-copy Tx batch parser stops when it encounters an invalid
descriptor. If this happens after one or more continuation descriptors,
the Tx consumer can be advanced past fragments that are neither submitted
to the driver nor returned to userspace through the completion ring.
A similar problem occurs when a packet exceeds xdp_zc_max_segs. The
descriptors consumed up to the limit are released without completion, and
the remaining continuation descriptors can subsequently be interpreted
as the beginning of another packet.
Parse Tx batches in packet units and distinguish descriptors belonging to
complete valid packets from descriptors consumed while draining an
invalid or oversized packet. Return the former to the driver and append
the latter to the CQ address area so userspace can reclaim their UMEM
frames.
Treat a standalone invalid descriptor as a one-descriptor reclaim-only
packet. Advancing the Tx-ring consumer releases the ring slot, but does
not by itself return ownership of the referenced UMEM frame to userspace.
Once draining starts, continue until the packet's end-of-packet
descriptor is consumed. Preserve the drain state on the socket when EOP
has not yet been supplied, so draining can continue during a later call.
Leave incomplete but otherwise valid packets on the Tx ring.
Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing.
Walk their Tx sockets one packet at a time, preserving the existing
per-socket fairness scheme, instead of using the legacy one-descriptor
fallback. Keep that fallback for shared pools that do not use
multi-buffer Tx. Since the drain state is maintained per socket and both
the singular and shared paths can resume an interrupted drain, changing
the socket list from singular to shared requires no special bind-time
transition.
CQ entries are positional, and drivers may complete only part of the Tx
work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only
entries cannot be published immediately when earlier driver-visible
descriptors are still outstanding.
Track the number of driver-visible CQ entries preceding the reclaim
entries. Let xsk_tx_completed() publish partial hardware Tx completions,
and publish the reclaim entries only after every earlier Tx descriptor
has completed. Complete a reclaim-only batch immediately when there is no
driver-visible work in front of it, and prevent another Tx batch from
being appended while reclaim entries remain pending.
Also cap batch processing by the size of the pool's temporary descriptor
array, as Tx rings belonging to sockets sharing a UMEM may have different
sizes.
This ensures that every invalid Tx descriptor consumed by the ZC batch
path is either submitted to the driver as part of a valid packet or
returned to userspace without violating CQ completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister()
syzbot reported a memory leak [1] in the UDP tunnel NIC offload code.
When device registration fails (e.g. in register_netdevice()), netdev core
unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued
during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister()
returns early:
if (utn->work_pending)
return;
Because failed registrations do not enter netdev_wait_allrefs_any(), no
subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the
struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked
permanently.
Fix this by removing the early return. Instead, synchronously cancel any
pending work with cancel_delayed_work_sync() before freeing @utn.
To be able to call cancel_delayed_work_sync() while holding RTNL (the work also
needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL
is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work())
to prevent high CPU contention while waiting for RTNL lock.
The utn->work_pending bookkeeping is no longer needed and is removed, as
the workqueue core already tracks the pending/running state of the work.
[1]
BUG: memory leak
unreferenced object 0xffff888127d5f840 (size 96):
comm "syz-executor", pid 5806, jiffies 4294942188
backtrace (crc 99fdb6c8):
__kmalloc_noprof+0x3bf/0x550
udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline]
udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline]
udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931
notifier_call_chain+0x59/0x160 kernel/notifier.c:85
call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250
register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: restore write access when removing an entry
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497d7 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix leak when pinning ubuf pages
When pin_user_pages_fast() returns fewer pages than requested, the pages
that were successfully pinned are not released, leading to a leak.
Fix this by unpinning any partially pinned pages before returning failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix memory leak in radeon_ring_restore() on lock failure
radeon_ring_restore() takes ownership of the data buffer allocated by
radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in
the non-restore branch; in the restore branch it relies on
radeon_ring_restore() to free it.
If radeon_ring_lock() fails, the function returned early without calling
kvfree(data), leaking the ring backup buffer on every GPU reset that
fails at the lock stage. During repeated GPU resets this causes
cumulative kernel memory exhaustion.
Free data before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix resource leak in probe error path
When pcim_iomap_region() or devm_kmemdup() fail, the code returns
directly without cleaning up previously allocated resources:
- mt76_device allocated by mt76_alloc_device()
- pci irq vectors allocated by pci_alloc_irq_vectors()
Fix this by jumping to the existing error cleanup path instead of
returning directly. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
When btmtk_isopkt_pad() fails, the previously allocated URB is not freed,
leaking the urb structure. Add usb_free_urb() before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR aging push to queue error flow
Aging pools with pinned handles requires moving handles from the
active queue to a non-empty inactive queue that might fail on new page
allocation, we are currently not handling the fault and leaking any mkey
that fails the push.
Fix by Introducing push_queue_to_queue_locked() that fills the
destination's partial tail page from the source and then splices the
remaining source pages onto the destination, performing no allocation.
Replace the per-handle move loop in age_pinned_pool() and the
open-coded splice in pool_aging_work() with calls to the helper.
As the helper cannot fail under memory pressure, removing a class of
GFP_ATOMIC allocations under the pool lock and simplifying the error
flow. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR set pinned push error path
Add destruction of FRMR handles in case the push to the pool fails.
This prevents resources leak in case pool page allocation fails. |
