Export limit exceeded: 377388 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (153 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-52799 | 1 Argoproj | 1 Argo-helm | 2026-04-15 | 8.3 High |
| Argo Workflows Chart is used to set up argo and its needed dependencies through one command. Prior to 0.44.0, the workflow-role has excessive privileges, the worst being create pods/exec, which will allow kubectl exec into any Pod in the same namespace, i.e. arbitrary code execution within those Pods. If a user can be made to run a malicious template, their whole namespace can be compromised. This affects versions of the argo-workflows Chart that use appVersion: 3.4 and above, which no longer need these permissions for the only available Executor, Emissary. It could also affect users below 3.4 depending on their choice of Executor in those versions. This only affects the Helm Chart and not the upstream manifests. This vulnerability is fixed in 0.44.0. | ||||
| CVE-2023-32259 | 2026-04-15 | 6.5 Medium | ||
| Insufficient Granularity of Access Control vulnerability in OpenText™ Service Management Automation X (SMAX), OpenText™ Asset Management X (AMX) allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Service Management Automation X (SMAX) versions 2020.05, 2020.08, 2020.11, 2021.02, 2021.05, 2021.08, 2021.11, 2022.05, 2022.11; and Asset Management X (AMX) versions 2021.08, 2021.11, 2022.05, 2022.11. | ||||
| CVE-2024-39279 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 6.5 Medium |
| Insufficient granularity of access control in UEFI firmware in some Intel(R) processors may allow a authenticated user to potentially enable denial of service via local access. | ||||
| CVE-2025-20628 | 1 Pingidentity | 1 Pingidm | 2026-04-09 | N/A |
| An insufficient granularity of access control vulnerability exists in PingIDM (formerly ForgeRock Identity Management) where administrators cannot properly configure access rules for Remote Connector Servers (RCS) running in client mode. This means attackers can spoof a client-mode RCS (if one exists) to intercept and/or modify an identity’s security-relevant properties, such as passwords and account recovery information. This issue is exploitable only when an RCS is configured to run in client mode. | ||||
| CVE-2022-24450 | 3 Linuxfoundation, Nats, Redhat | 3 Nats-server, Nats Streaming Server, Acm | 2026-03-30 | 8.8 High |
| NATS nats-server before 2.7.2 has Incorrect Access Control. Any authenticated user can obtain the privileges of the System account by misusing the "dynamically provisioned sandbox accounts" feature. | ||||
| CVE-2026-33249 | 2 Linuxfoundation, Nats | 2 Nats-server, Nats Server | 2026-03-27 | 4.3 Medium |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.11.0 and prior to versions 2.11.15 and 2.12.6, a valid client which uses message tracing headers can indicate that the trace messages can be sent to an arbitrary valid subject, including those to which the client does not have publish permission. The payload is a valid trace message and not chosen by the attacker. Versions 2.11.15 and 2.12.6 contain a fix. No known workarounds are available. | ||||
| CVE-2026-26939 | 1 Elastic | 1 Kibana | 2026-03-25 | 6.5 Medium |
| Missing Authorization (CWE-862) in Kibana’s server-side Detection Rule Management can lead to Unauthorized Endpoint Response Action Configuration (host isolation, process termination, and process suspension) via CAPEC-1 (Accessing Functionality Not Properly Constrained by ACLs). This requires an authenticated attacker with rule management privileges. | ||||
| CVE-2025-69196 | 1 Jlowin | 1 Fastmcp | 2026-03-24 | 6.5 Medium |
| FastMCP is the standard framework for building MCP applications. Prior to version 2.14.2, the server does not properly respect the resource parameter submitted by the client in the authorization and token request. Instead of issuing the token explicitly for the MCP server, the token is issued for the base_url passed to the OAuthProxy during initialization. This issue has been patched 2.14.2. | ||||
| CVE-2025-29987 | 1 Dell | 4 Data Domain Operating System, Powerprotect Data Domain, Powerprotect Dm5500 and 1 more | 2026-02-26 | 8.8 High |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) versions prior to 8.3.0.15 contain an Insufficient Granularity of Access Control vulnerability. An authenticated user from a trusted remote client could exploit this vulnerability to execute arbitrary commands with root privileges. | ||||
| CVE-2023-6725 | 1 Redhat | 2 Openstack, Openstack Platform | 2026-02-25 | 5.5 Medium |
| An access-control flaw was found in the OpenStack Designate component where private configuration information including access keys to BIND were improperly made world readable. A malicious attacker with access to any container could exploit this flaw to access sensitive information. | ||||
| CVE-2025-32703 | 1 Microsoft | 3 Visual Studio 2017, Visual Studio 2019, Visual Studio 2022 | 2026-02-13 | 5.5 Medium |
| Insufficient granularity of access control in Visual Studio allows an authorized attacker to disclose information locally. | ||||
| CVE-2025-27026 | 1 Nokia | 2 G42, G42 Firmware | 2026-02-11 | 4.9 Medium |
| A missing double-check feature in the WebGUI for CLI deactivation in Infinera G42 version R6.1.3 allows an authenticated administrator to make other management interfaces unavailable via local and network interfaces. The CLI deactivation via the WebGUI does not only stop CLI interface but deactivates also Linux Shell, WebGUI and Physical Serial Console access. No confirmation is asked at deactivation time. Loosing access to these services device administrators are at risk of completely loosing device control. | ||||
| CVE-2024-4147 | 2 Lunary, Lunary-ai | 2 Lunary, Lunary | 2026-02-11 | 6.5 Medium |
| In lunary-ai/lunary version 1.2.13, an insufficient granularity of access control vulnerability allows users to delete prompts created in other organizations through ID manipulation. The vulnerability stems from the application's failure to validate the ownership of the prompt before deletion, only checking if the user has permissions to delete such resources without verifying if it belongs to the user's project or organization. As a result, users can remove prompts not owned by their organization or project, leading to legitimate users being unable to access the removed prompts and causing information inconsistencies. | ||||
| CVE-2025-11246 | 1 Gitlab | 1 Gitlab | 2026-01-22 | 5.4 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.4 before 18.5.5, 18.6 before 18.6.3, and 18.7 before 18.7.1 that could have allowed an authenticated user with specific permissions to remove all project runners from unrelated projects by manipulating GraphQL runner associations. | ||||
| CVE-2025-20305 | 1 Cisco | 2 Identity Services Engine, Identity Services Engine Software | 2025-12-04 | 4.3 Medium |
| A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability exists because certain files lack proper data protection mechanisms. An attacker with read-only Administrator privileges could exploit this vulnerability by performing actions where the results should only be viewable to a high-privileged user. A successful exploit could allow the attacker to view passwords that are normally not visible to read-only administrators. | ||||
| CVE-2023-39418 | 3 Debian, Postgresql, Redhat | 5 Debian Linux, Postgresql, Enterprise Linux and 2 more | 2025-11-21 | 3.1 Low |
| A vulnerability was found in PostgreSQL with the use of the MERGE command, which fails to test new rows against row security policies defined for UPDATE and SELECT. If UPDATE and SELECT policies forbid some rows that INSERT policies do not forbid, a user could store such rows. | ||||
| CVE-2023-4456 | 1 Redhat | 2 Logging, Openshift Logging | 2025-11-20 | 5.7 Medium |
| A flaw was found in openshift-logging LokiStack. The key used for caching is just the token, which is too broad. This issue allows a user with a token valid for one action to execute other actions as long as the authorization allowing the original action is still cached. | ||||
| CVE-2022-0866 | 1 Redhat | 4 Jboss Enterprise Application Platform, Openstack Platform, Red Hat Single Sign On and 1 more | 2025-11-06 | 5.3 Medium |
| This is a concurrency issue that can result in the wrong caller principal being returned from the session context of an EJB that is configured with a RunAs principal. In particular, the org.jboss.as.ejb3.component.EJBComponent class has an incomingRunAsIdentity field. This field is used by the org.jboss.as.ejb3.security.RunAsPrincipalInterceptor to keep track of the current identity prior to switching to a new identity created using the RunAs principal. The exploit consist that the EJBComponent#incomingRunAsIdentity field is currently just a SecurityIdentity. This means in a concurrent environment, where multiple users are repeatedly invoking an EJB that is configured with a RunAs principal, it's possible for the wrong the caller principal to be returned from EJBComponent#getCallerPrincipal. Similarly, it's also possible for EJBComponent#isCallerInRole to return the wrong value. Both of these methods rely on incomingRunAsIdentity. Affects all versions of JBoss EAP from 7.1.0 and all versions of WildFly 11+ when Elytron is enabled. | ||||
| CVE-2023-43040 | 2 Ibm, Redhat | 3 Spectrum Fusion Hci, Storage Fusion Hci, Ceph Storage | 2025-11-04 | 6.5 Medium |
| IBM Spectrum Fusion HCI 2.5.2 through 2.7.2 could allow an attacker to perform unauthorized actions in RGW for Ceph due to improper bucket access. IBM X-Force ID: 266807. | ||||
| CVE-2024-8927 | 2 Php, Redhat | 2 Php, Enterprise Linux | 2025-11-03 | 7.5 High |
| In PHP versions 8.1.* before 8.1.30, 8.2.* before 8.2.24, 8.3.* before 8.3.12, HTTP_REDIRECT_STATUS variable is used to check whether or not CGI binary is being run by the HTTP server. However, in certain scenarios, the content of this variable can be controlled by the request submitter via HTTP headers, which can lead to cgi.force_redirect option not being correctly applied. In certain configurations this may lead to arbitrary file inclusion in PHP. | ||||