| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in seladb PcapPlusPlus 25.05. This affects the function pcpp::TelnetLayer::getSubCommand of the file Packet++/src/TelnetLayer.cpp of the component Telnet Subnegotiation Packet Handler. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitability is reported as difficult. The exploit is publicly available and might be used. The identifier of the patch is 98e671010bc7c87b95898c22ae289220ae92542b. It is recommended to apply a patch to fix this issue. |
| A flaw was found in libsolv. This stack-based buffer overflow vulnerability occurs in libsolv's Debian metadata parser when processing specially crafted Debian repository metadata. An attacker could exploit this by providing malicious SHA384 or SHA512 checksum tags, leading to memory corruption and a denial of service (DoS) in the affected system. |
| A security flaw has been discovered in seladb PcapPlusPlus 25.05. This impacts the function pcpp::ModbusLayer::getLength in the library Packet++/header/ModbusLayer.h of the component Modbus Protocol Handler. The manipulation of the argument length results in heap-based buffer overflow. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is said to be difficult. The exploit has been released to the public and may be used for attacks. The patch is identified as 4c90c3e3418a2b09dc82b7ca5775e9c1e22fe454. Applying a patch is advised to resolve this issue. |
| A flaw has been found in Edimax EW-7478APC 1.04. This issue affects the function formUSBAccount of the file /goform/formUSBAccount of the component POST Request Handler. This manipulation of the argument UserName/Password causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. This affects the function formQoS of the file /goform/formQoS of the component POST Request Handler. The manipulation of the argument selSSID leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An authenticated stack-based buffer overflow vulnerability exists in the web management interface of TP-Link TL-WR841N v14. A remote authenticated attacker can send crafted HTTP requests to cause the embedded web server to overflow a stack buffer, resulting in a crash of the affected process.
Successful exploitation results in a denial-of-service condition, causing the device to crash and automatically reboot. |
| A vulnerability has been found in Edimax EW-7478APC 1.04. Impacted is the function formUSBFolder of the file /goform/formUSBFolder of the component POST Request Handler. Such manipulation of the argument ShareName/SelectName leads to buffer overflow. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in llvm llvm-project up to 22.1.6. This affects the function llvm::StringMap::insert in the library /lib/IR/ValueSymbolTable.cpp of the component ValueSymbolTable Module. The manipulation results in stack-based buffer overflow. Attacking locally is a requirement. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. |
| A security vulnerability has been detected in Tenda JD12L 16.03.53.23. Impacted is the function formSetPPTPServer of the file /goform/SetPptpServerCfg. Such manipulation of the argument startIp leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was determined in llvm llvm-project up to 22.1.6. This impacts the function GCRelocateInst::getBasePtr in the library llvm/lib/IR/IntrinsicInst.cpp of the component Bitcode File Handler. This manipulation causes heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| A vulnerability was identified in Wavlink WL-NU516U1-A M16U1_V240425. The impacted element is the function sub_407504 of the file /cgi-bin/wireless.cgi of the component POST Parameter Handler. Such manipulation of the argument Guest_ssid leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability has been found in Edimax EW-7478APC 1.04. This impacts the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. Such manipulation of the argument L2TPUserName leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Push kjump return address even for non-kjump kexec
The version of purgatory code shipped by kexec-tools attempts to look above
the top of its stack to find a return address for a kjump, even in a non-kjump
kexec.
After the commit in Fixes: the word above the stack might not be there,
leading to a fault (which is at least now caught by my exception-handling code
in kexec).
That commit fixed things for the actual kjump path, but no longer
"gratuitously" pushes the unused return address to the stack in the non-kjump
path. Put that *back* in the non-kjump path, to prevent purgatory from
crashing when trying to access it. |
| A vulnerability was found in Edimax EW-7478APC 1.04. Affected is the function formPPPoESetup of the file /goform/formPPPoESetup of the component POST Request Handler. Performing a manipulation of the argument pppUserName results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Tenda JD12L 16.03.53.23. The affected element is the function fromSetWifiGusetBasic of the file /goform/WifiGuestSet. Performing a manipulation of the argument shareSpeed results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. |
| A security flaw has been discovered in Investintech SlimPDFReader up to 2.0.14. Affected by this issue is the function SlimPDFReader!Investintech::PCV::TeighaDo+0x25cde0 of the file SlimPDFReader.exe of the component PDF File Handler. Performing a manipulation results in out-of-bounds read. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| Eclipse tinydtls before commit b3efd41ad111a4920f599f51ffa4f5e9f1e72221 contains an out-of-bounds read vulnerability in the check_server_certificate() function that allows unauthenticated attackers to trigger reads beyond valid buffer boundaries by crafting a Certificate handshake message with a specific fragment_length value. Attackers can exploit missing buffer length validation before uint24 reads, memcmp, and memcpy operations during DTLS epoch 0 on both client and server paths to cause denial of service on memory-constrained devices. |
