| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on marvell probe failure
Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on registration failure
Make sure to release the sibling interfaces in case controller
registration fails to avoid use-after-free and double-free when they are
eventually disconnected.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Remove device debugfs before releasing devres
VFIO device debugfs files created with debugfs_create_devm_seqfile()
store a devres allocated debugfs_devm_entry as inode private data.
vfio_unregister_group_dev() currently calls vfio_device_del() before
vfio_device_debugfs_exit(), but device_del() releases devres. This can
leave debugfs entries visible with stale inode private data while
unregister waits for userspace references to drain.
Remove the per-device debugfs tree before vfio_device_del(). The debugfs
view is diagnostic only, so losing it at the start of unregister is
preferable to preserving entries whose backing storage may already have
been released.
Complete the teardown by clearing the per-device debugfs root after
removal. This matches the global debugfs root cleanup and prevents
future users from mistaking a removed dentry for a live debugfs tree
during the remainder of unregister. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Release the VGA arbiter client on register_device() failure
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
(cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: meson: amlogic-a4: fix deadlock issue
Accessing the pinconf-pins sysfs node may deadlock.
pinconf_pins_show() holds pctldev->mutex, and the platform driver
calls pinctrl_find_gpio_range_from_pin(), which tries to acquire
the same mutex again, leading to a deadlock.
Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, matching rt6_mtu_change_route() and the
fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in
fib6_mtu().").
Oops: general protection fault, ... KASAN: null-ptr-deref in range
[0x00000000000002a8-0x00000000000002af]
RIP: 0010:fib6_nh_mtu_change+0x203/0x990
rt6_mtu_change_route+0x141/0x1d0
__fib6_clean_all+0xd0/0x160
rt6_mtu_change+0xb4/0x100
ndisc_router_discovery+0x24b5/0x2cb0
icmpv6_rcv+0x12e9/0x1710
ipv6_rcv+0x39b/0x410 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__sha256_update (lib/crypto/sha256.c:208)
crypto_sha256_update (crypto/sha256.c:142)
verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436)
kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151)
__do_sys_kexec_file_load (kernel/kexec_file.c:406)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Kernel panic - not syncing: Fatal exception
Validate that the addition does not overflow and the result does not
exceed pelen before the subtraction. Return -ELIBBAD on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psample: fix info leak in PSAMPLE_ATTR_DATA
psample open codes nla_put() presumably to avoid wiping
the data with 0s just to override it with packet data.
This open coding is missing clearing the pad, however,
each netlink attr is padded to 4B and data_len may
not be divisible by 4B. |
| A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation.
Due to a race condition between nf_tables netlink control plane transaction and nft_set element garbage collection, it is possible to underflow the reference counter causing a use-after-free vulnerability.
We recommend upgrading past commit 3e91b0ebd994635df2346353322ac51ce84ce6d8. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh after handling HAO option
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix DMA address corruption due to find_vma misuse
fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.
Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA. |
