| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation
Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint
memory access array and to comply with the FF-A spec instead of defaulting
to `sizeof(struct ffa_mem_region)`.
This requires moving `ffa_mem_region_additional_setup()` earlier in the setup
flow.
Also, add sanity checks to ensure the calculated descriptor offsets do not
exceed `max_fragsize`. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: extend conn_hash lookup critical sections
Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.
Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.
Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().
This avoids concurrent deletion of the conn before we are done
dereferencing it.
Also, make sure to hold hdev->lock when accessing hdev->accept_list. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix use-after-free on workqueue during remove
In pdsc_remove(), the workqueue is destroyed before pdsc_teardown()
is called. This ordering allows two paths to queue work on the
destroyed workqueue:
1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error
path in pdsc_devcmd_locked() queues health_work.
2. A NotifyQ event can trigger the ISR and queue work before free_irq()
is called in pdsc_teardown().
Fix by moving destroy_workqueue() after pdsc_teardown() so the
workqueue outlives every queuer; destroy_workqueue() then flushes any
work still pending.
Draining the queued work also requires ordering the teardown so the
resources that work touches are freed last:
- In pdsc_qcq_free(), after freeing the interrupt, cancel_work_sync()
the queue's work and only then clear qcq->intx, so
pdsc_process_adminq()'s read of qcq->intx for interrupt-credit
return cannot race with the clear.
- Free adminqcq before notifyqcq: the shared adminq ISR is released
when adminqcq is freed, and the adminq work accesses notifyqcq, so
both must be stopped before notifyqcq is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix setup list UAF on proc write error
snd_pcm_oss_proc_write() links a newly allocated setup entry into the
OSS setup list before duplicating the task name. If the task-name
allocation fails, the error path frees the already linked entry and
leaves setup_list pointing at freed memory.
A later OSS device open can then walk the stale list entry in
snd_pcm_oss_look_for_setup() and dereference freed memory.
Allocate the task name and initialize the setup entry before publishing
the entry on setup_list. Also fetch the initial proc read iterator only
after taking setup_mutex, so all setup_list traversal follows the same
list lifetime rules. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix BQL imbalance in TX path
Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight
packets are accounted only for the AIROHA_NUM_TX_RING netdev TX
queues. The queue index is computed as:
qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx)
txq = netdev_get_tx_queue(dev, qid);
However, airoha_qdma_tx_napi_poll() accounts completions across all
netdev TX queues (num_tx_queues), leading to inconsistent BQL
accounting.
Also reset all netdev TX queues in the ndo_stop callback. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE
The current implementation incorrectly handles memory regions (MRs) with
page sizes different from the system PAGE_SIZE. The core issue is that
rxe_set_page() is called with mr->page_size step increments, but the
page_list stores individual struct page pointers, each representing
PAGE_SIZE of memory.
ib_sg_to_page() has ensured that when i>=1 either
a) SG[i-1].dma_end and SG[i].dma_addr are contiguous
or
b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned.
This leads to incorrect iova-to-va conversion in scenarios:
1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K):
ibmr->iova = 0x181800
sg[0]: dma_addr=0x181800, len=0x800
sg[1]: dma_addr=0x173000, len=0x1000
Access iova = 0x181800 + 0x810 = 0x182010
Expected VA: 0x173010 (second SG, offset 0x10)
Before fix:
- index = (0x182010 >> 12) - (0x181800 >> 12) = 1
- page_offset = 0x182010 & 0xFFF = 0x10
- xarray[1] stores system page base 0x170000
- Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong)
2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K):
ibmr->iova = 0x18f800
sg[0]: dma_addr=0x18f800, len=0x800
sg[1]: dma_addr=0x170000, len=0x1000
Access iova = 0x18f800 + 0x810 = 0x190010
Expected VA: 0x170010 (second SG, offset 0x10)
Before fix:
- index = (0x190010 >> 16) - (0x18f800 >> 16) = 1
- page_offset = 0x190010 & 0xFFFF = 0x10
- xarray[1] stores system page for dma_addr 0x170000
- Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong)
Yi Zhang reported a kernel panic[1] years ago related to this defect.
Solution:
1. Replace xarray with pre-allocated rxe_mr_page array for sequential
indexing (all MR page indices are contiguous)
2. Each rxe_mr_page stores both struct page* and offset within the
system page
3. Handle MR page_size != PAGE_SIZE relationships:
- page_size > PAGE_SIZE: Split MR pages into multiple system pages
- page_size <= PAGE_SIZE: Store offset within system page
4. Add boundary checks and compatibility validation
This ensures correct iova-to-va conversion regardless of MR page size
and system PAGE_SIZE relationship, while improving performance through
array-based sequential access.
Tests on 4K and 64K PAGE_SIZE hosts:
- rdma-core/pytests
$ ./build/bin/run_tests.py --dev eth0_rxe
- blktest:
$ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd
[1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: admv1013: fix NULL pointer dereference on str
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: universal-pidff: stop the device when force-feedback init fails
universal_pidff_probe() starts the device with hid_hw_start() and then, if
force-feedback initialisation fails, returns the error through a label that
only does "return error". The device is left started.
The HID core does not unwind on the driver's behalf. __hid_device_probe()
releases the devres group, closes the report and clears hdev->driver:
if (ret) {
devres_release_group(&hdev->dev, hdev->devres_group_id);
hid_close_report(hdev);
hdev->driver = NULL;
}
The hidraw character device that hid_hw_start() registered through
hid_connect() is allocated with kzalloc() and added with cdev_device_add(),
so it is not devres-managed and survives that. With hdev->driver NULL,
hid_device_remove() skips hid_hw_stop() as well, because it only unwinds
while a driver is still attached. The registration therefore outlives the
device on both paths.
Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports
a use-after-free write from hidraw_open() -> hid_hw_open() -> the
transport's open callback, which takes a spinlock inside the freed object.
A descriptor that carries a PID usage page and no input reports is enough:
hidraw claims the device so hid_hw_start() succeeds, while hid->inputs
stays empty so force-feedback init fails. The other failure returns in
hid_pidff_init_with_quirks() - no output reports, an allocation failure,
pidff_init_fields(), pidff_check_autocenter(), an unusable effect count,
input_ff_create() - all reach the same label.
Stop the device on that path. hid-dr.c and hid-emsff.c, which start the
device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do
this. The two earlier gotos must keep returning without hid_hw_stop(),
since neither has a started device, so give the path that fails after the
start its own label.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails
When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE,
it creates a replacement listener cm_id and returns 1, telling
the CM core to destroy the old one. If the replacement allocation
fails, sc_cm_id still points at the old cm_id that the CM core is
about to destroy. Any subsequent dereference of sc_cm_id --
such as svc_rdma_detach()'s rdma_disconnect() call -- is a
use-after-free.
NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s
rdma_disconnect() call against NULL so that the listener can
be torn down safely when the server shuts down. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: qcom_battmgr: fix use-after-free
qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service
comes up, and the worker recovers battmgr through container_of() to issue
firmware requests. The PMIC GLINK client stays on the client list until
its devres release action runs, so a PDR notification can keep queueing
the work, and a pending or running worker can access battmgr after devres
frees it.
Make enable_work device-managed with devm_work_autocancel(), registered
before the PMIC GLINK client is allocated. The devres cleanup then
releases the client first, so no further notification can queue the work,
and cancels the work before battmgr is freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix possible dereference of uninitialized pointer
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register
The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind,
which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this
structure needs to be stored inside the driver data before invoking it.
As drvdata is currently uninitialized it leads to a crash when
registering the DSI DRM encoder right after acquiring
the mode_config.idr_mutex, blocking all subsequent DRM operations.
Fixes the following crash during mediatek-drm probe (tested on Xiaomi
Smart Clock x04g):
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000040
[...]
Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib
drm_dma_helper drm_kms_helper panel_simple
[...]
Call trace:
drm_mode_object_add+0x58/0x98 (P)
__drm_encoder_init+0x48/0x140
drm_encoder_init+0x6c/0xa0
drm_simple_encoder_init+0x20/0x34 [drm_kms_helper]
mtk_dsi_bind+0x34/0x13c [mediatek_drm]
component_bind_all+0x120/0x280
mtk_drm_bind+0x284/0x67c [mediatek_drm]
try_to_bring_up_aggregate_device+0x23c/0x320
__component_add+0xa4/0x198
component_add+0x14/0x20
mtk_dsi_host_attach+0x78/0x100 [mediatek_drm]
mipi_dsi_attach+0x2c/0x50
panel_simple_dsi_probe+0x4c/0x9c [panel_simple]
mipi_dsi_drv_probe+0x1c/0x28
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__device_attach_driver+0xbc/0x17c
bus_for_each_drv+0x88/0xf0
__device_attach+0x9c/0x1cc
device_initial_probe+0x54/0x60
bus_probe_device+0x34/0xa0
device_add+0x5b0/0x800
mipi_dsi_device_register_full+0xdc/0x16c
mipi_dsi_host_register+0xc4/0x17c
mtk_dsi_probe+0x10c/0x260 [mediatek_drm]
platform_probe+0x5c/0xa4
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x24/0x30
bus_add_driver+0x11c/0x240
driver_register+0x68/0x130
__platform_register_drivers+0x64/0x160
mtk_drm_init+0x24/0x1000 [mediatek_drm]
do_one_initcall+0x60/0x1d0
do_init_module+0x54/0x240
load_module+0x1838/0x1dc0
init_module_from_file+0xd8/0xf0
__arm64_sys_finit_module+0x1b4/0x428
invoke_syscall.constprop.0+0x48/0xc8
do_el0_svc+0x3c/0xb8
el0_svc+0x34/0xe8
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80) |
| In the Linux kernel, the following vulnerability has been resolved:
ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS
Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which
call iptunnel_xmit_stats().
iptunnel_xmit_stats() was assuming tunnels were only using
NETDEV_PCPU_STAT_TSTATS.
@syncp offset in pcpu_sw_netstats and pcpu_dstats is different.
32bit kernels would either have corruptions or freezes if the syncp
sequence was overwritten.
This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid
a potential cache line miss since iptunnel_xmit_stats() needs to read it. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec()
KASAN reported a stack-out-of-bounds access in ima_appraise_measurement
from is_bprm_creds_for_exec:
BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0
Read of size 1 at addr ffffc9000160f940 by task sudo/550
The buggy address belongs to stack of task sudo/550
and is located at offset 24 in frame:
ima_appraise_measurement+0x0/0x16a0
This frame has 2 objects:
[48, 56) 'file'
[80, 148) 'hash'
This is caused by using container_of on the *file pointer. This offset
calculation is what triggers the stack-out-of-bounds error.
In order to fix this, pass in a bprm_is_check boolean which can be set
depending on how process_measurement is called. If the caller has a
linux_binprm pointer and the function is BPRM_CHECK we can determine
is_check and set it then. Otherwise set it to false. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF on lgr list traversal in smcr_port_err()
smcr_port_err() traverses smc_lgr_list.list without holding
smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched()
to free an lgr while it is still being dereferenced.
Hold smc_lgr_list.lock across the traversal. Update
smc_ib_gid_check() to call smcr_port_err() after releasing the lock. |
