| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section
The .compat section is a dummy PE section that contains the address of
the 32-bit entrypoint of the 64-bit kernel image if it is bootable from
32-bit firmware (i.e., CONFIG_EFI_MIXED=y)
This section is only 8 bytes in size and is only referenced from the
loader, and so it is placed at the end of the memory view of the image,
to avoid the need for padding it to 4k, which is required for sections
appearing in the middle of the image.
Unfortunately, this violates the PE/COFF spec, and even if most EFI
loaders will work correctly (including the Tianocore reference
implementation), PE loaders do exist that reject such images, on the
basis that both the file and memory views of the file contents should be
described by the section headers in a monotonically increasing manner
without leaving any gaps.
So reorganize the sections to avoid this issue. This results in a slight
padding overhead (< 4k) which can be avoided if desired by disabling
CONFIG_EFI_MIXED (which is only needed in rare cases these days) |
| In the Linux kernel, the following vulnerability has been resolved:
ppp_async: limit MRU to 64K
syzbot triggered a warning [1] in __alloc_pages():
WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)
Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K")
Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU)
[1]:
WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events_unbound flush_to_ldisc
pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537
sp : ffff800093967580
x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000
x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0
x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8
x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120
x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005
x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000
x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001
x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0
Call trace:
__alloc_pages+0x308/0x698 mm/page_alloc.c:4543
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
__kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926
__do_kmalloc_node mm/slub.c:3969 [inline]
__kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001
kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590
__alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651
__netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715
netdev_alloc_skb include/linux/skbuff.h:3235 [inline]
dev_alloc_skb include/linux/skbuff.h:3248 [inline]
ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline]
ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341
tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390
tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37
receive_buf drivers/tty/tty_buffer.c:444 [inline]
flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494
process_one_work+0x694/0x1204 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:2787
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs, fscache: Prevent Oops in fscache_put_cache()
This function dereferences "cache" and then checks if it's
IS_ERR_OR_NULL(). Check first, then dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: heaps: Fix potential spectre v1 gadget
It appears like nr could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents
of kernel memory from being leaked to userspace via speculative
execution by using array_index_nospec.
[sumits: added fixes and cc: stable tags] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mpls: Fix warning during failed attribute validation
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: powerclamp: fix mismatch in get function for max_idle
KASAN reported this
[ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90
[ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105
...
[ 444.853442] The buggy address belongs to the variable:
[ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp]
There is a mismatch between the param_get_int and the definition of
max_idle. Replacing param_get_int with param_get_byte resolves this
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix TX CQE error handling
For an unknown TX CQE error type (probably from a newer hardware),
still free the SKB, update the queue tail, etc., otherwise the
accounting will be wrong.
Also, TX errors can be triggered by injecting corrupted packets, so
replace the WARN_ONCE to ratelimited error logging. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()
Including the transhdrlen in length is a problem when the packet is
partially filled (e.g. something like send(MSG_MORE) happened previously)
when appending to an IPv4 or IPv6 packet as we don't want to repeat the
transport header or account for it twice. This can happen under some
circumstances, such as splicing into an L2TP socket.
The symptom observed is a warning in __ip6_append_data():
WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800
that occurs when MSG_SPLICE_PAGES is used to append more data to an already
partially occupied skbuff. The warning occurs when 'copy' is larger than
the amount of data in the message iterator. This is because the requested
length includes the transport header length when it shouldn't. This can be
triggered by, for example:
sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP);
bind(sfd, ...); // ::1
connect(sfd, ...); // ::1 port 7
send(sfd, buffer, 4100, MSG_MORE);
sendfile(sfd, dfd, NULL, 1024);
Fix this by only adding transhdrlen into the length if the write queue is
empty in l2tp_ip6_sendmsg(), analogously to how UDP does things.
l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds
the UDP packet itself. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/47x: Fix 47x syscall return crash
Eddie reported that newer kernels were crashing during boot on his 476
FSP2 system:
kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xb7ee2000
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K FSP-2
Modules linked in:
CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1
Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2
NIP: b7ee2000 LR: 8c008000 CTR: 00000000
REGS: bffebd83 TRAP: 0400 Not tainted (6.1.55-d23900f.ppcnf-fs p2)
MSR: 00000030 <IR,DR> CR: 00001000 XER: 20000000
GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000
GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000
GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0
GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0
NIP [b7ee2000] 0xb7ee2000
LR [8c008000] 0x8c008000
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 0000000000000000 ]---
The problem is in ret_from_syscall where the check for
icache_44x_need_flush is done. When the flush is needed the code jumps
out-of-line to do the flush, and then intends to jump back to continue
the syscall return.
However the branch back to label 1b doesn't return to the correct
location, instead branching back just prior to the return to userspace,
causing bogus register values to be used by the rfi.
The breakage was introduced by commit 6f76a01173cc
("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which
inadvertently removed the "1" label and reused it elsewhere.
Fix it by adding named local labels in the correct locations. Note that
the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n
compiles. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix kernel address leakage in atomic fetch
The change in commit 37086bfdc737 ("bpf: Propagate stack bounds to registers
in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since
this would allow for unprivileged users to leak kernel pointers. For example,
an atomic fetch/and with -1 on a stack destination which holds a spilled
pointer will migrate the spilled register type into a scalar, which can then
be exported out of the program (since scalar != pointer) by dumping it into
a map value.
The original implementation of XADD was preventing this situation by using
a double call to check_mem_access() one with BPF_READ and a subsequent one
with BPF_WRITE, in both cases passing -1 as a placeholder value instead of
register as per XADD semantics since it didn't contain a value fetch. The
BPF_READ also included a check in check_stack_read_fixed_off() which rejects
the program if the stack slot is of __is_pointer_value() if dst_regno < 0.
The latter is to distinguish whether we're dealing with a regular stack spill/
fill or some arithmetical operation which is disallowed on non-scalars, see
also 6e7e63cbb023 ("bpf: Forbid XADD on spilled pointers for unprivileged
users") for more context on check_mem_access() and its handling of placeholder
value -1.
One minimally intrusive option to fix the leak is for the BPF_FETCH case to
initially check the BPF_READ case via check_mem_access() with -1 as register,
followed by the actual load case with non-negative load_reg to propagate
stack bounds to registers. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: fix memory corruption in vduse_dev_ioctl()
The "config.offset" comes from the user. There needs to a check to
prevent it being out of bounds. The "config.offset" and
"dev->config_size" variables are both type u32. So if the offset if
out of bounds then the "dev->config_size - config.offset" subtraction
results in a very high u32 value. The out of bounds offset can result
in memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
ipack: ipoctal: fix module reference leak
A reference to the carrier module was taken on every open but was only
released once when the final reference to the tty struct was dropped.
Fix this by taking the module reference and initialising the tty driver
data when installing the tty. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Prevent state corruption in __fpu__restore_sig()
The non-compacted slowpath uses __copy_from_user() and copies the entire
user buffer into the kernel buffer, verbatim. This means that the kernel
buffer may now contain entirely invalid state on which XRSTOR will #GP.
validate_user_xstate_header() can detect some of that corruption, but that
leaves the onus on callers to clear the buffer.
Prior to XSAVES support, it was possible just to reinitialize the buffer,
completely, but with supervisor states that is not longer possible as the
buffer clearing code split got it backwards. Fixing that is possible but
not corrupting the state in the first place is more robust.
Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate()
which validates the XSAVE header contents before copying the actual states
to the kernel. copy_user_to_xstate() was previously only called for
compacted-format kernel buffers, but it works for both compacted and
non-compacted forms.
Using it for the non-compacted form is slower because of multiple
__copy_from_user() operations, but that cost is less important than robust
code in an already slow path.
[ Changelog polished by Dave Hansen ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
Both Intel and AMD consider it to be architecturally valid for XRSTOR to
fail with #PF but nonetheless change the register state. The actual
conditions under which this might occur are unclear [1], but it seems
plausible that this might be triggered if one sibling thread unmaps a page
and invalidates the shared TLB while another sibling thread is executing
XRSTOR on the page in question.
__fpu__restore_sig() can execute XRSTOR while the hardware registers
are preserved on behalf of a different victim task (using the
fpu_fpregs_owner_ctx mechanism), and, in theory, XRSTOR could fail but
modify the registers.
If this happens, then there is a window in which __fpu__restore_sig()
could schedule out and the victim task could schedule back in without
reloading its own FPU registers. This would result in part of the FPU
state that __fpu__restore_sig() was attempting to load leaking into the
victim task's user-visible state.
Invalidate preserved FPU registers on XRSTOR failure to prevent this
situation from corrupting any state.
[1] Frequent readers of the errata lists might imagine "complex
microarchitectural conditions". |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the
error handling path of the probe function, as already done in the remove
function |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Always clear vmx->fail on emulation_required
Revert a relatively recent change that set vmx->fail if the vCPU is in L2
and emulation_required is true, as that behavior is completely bogus.
Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong:
(a) it's impossible to have both a VM-Fail and VM-Exit
(b) vmcs.EXIT_REASON is not modified on VM-Fail
(c) emulation_required refers to guest state and guest state checks are
always VM-Exits, not VM-Fails.
For KVM specifically, emulation_required is handled before nested exits
in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect,
i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored.
Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit()
firing when tearing down the VM as KVM never expects vmx->fail to be set
when L2 is active, KVM always reflects those errors into L1.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548
nested_vmx_vmexit+0x16bd/0x17e0
arch/x86/kvm/vmx/nested.c:4547
Modules linked in:
CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547
Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80
Call Trace:
vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline]
nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330
vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799
kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989
kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441
kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline]
kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545
kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline]
kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220
kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489
__fput+0x3fc/0x870 fs/file_table.c:280
task_work_run+0x146/0x1c0 kernel/task_work.c:164
exit_task_work include/linux/task_work.h:32 [inline]
do_exit+0x705/0x24f0 kernel/exit.c:832
do_group_exit+0x168/0x2d0 kernel/exit.c:929
get_signal+0x1740/0x2120 kernel/signal.c:2852
arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300
do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying
get_any_page(). This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:737!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: release_pages+0x53f/0x840
Call Trace:
free_pages_and_swap_cache+0x64/0x80
tlb_flush_mmu+0x6f/0x220
unmap_page_range+0xe6c/0x12c0
unmap_single_vma+0x90/0x170
unmap_vmas+0xc4/0x180
exit_mmap+0xde/0x3a0
mmput+0xa3/0x250
do_exit+0x564/0x1470
do_group_exit+0x3b/0x100
__do_sys_exit_group+0x13/0x20
__x64_sys_exit_group+0x16/0x20
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in:
---[ end trace e99579b570fe0649 ]---
RIP: 0010:release_pages+0x53f/0x840 |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: regulators: Fix locking up when voltage-spread is out of range
Fix voltage coupler lockup which happens when voltage-spread is out
of range due to a bug in the code. The max-spread requirement shall be
accounted when CPU regulator doesn't have consumers. This problem is
observed on Tegra30 Ouya game console once system-wide DVFS is enabled
in a device-tree. |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: connac: fix kernel warning adding monitor interface
Fix the following kernel warning adding a monitor interface in
mt76_connac_mcu_uni_add_dev routine.
[ 507.984882] ------------[ cut here ]------------
[ 507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[ 508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0
[ 508.065461] Hardware name: MT7622_MT7531 RFB (DT)
[ 508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[ 508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[ 508.087367] sp : ffffffc013a33930
[ 508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0
[ 508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008
[ 508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610
[ 508.106577] x23: ffffff801d022990 x22: ffffff801d024de8
[ 508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8
[ 508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000
[ 508.122482] x17: 00000000ffffffff x16: 0000000000000000
[ 508.127785] x15: 0000000000000080 x14: ffffff801d704000
[ 508.133087] x13: 0000000000000040 x12: 0000000000000002
[ 508.138389] x11: 000000000000000c x10: 0000000000000000
[ 508.143691] x9 : 0000000000000020 x8 : 0000000000000001
[ 508.148992] x7 : 0000000000000000 x6 : 0000000000000000
[ 508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006
[ 508.159596] x3 : 0000000000000001 x2 : 0000000000000000
[ 508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0
[ 508.170200] Call trace:
[ 508.172640] mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[ 508.179159] mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[ 508.184394] drv_add_interface+0x34/0x88 [mac80211]
[ 508.189271] ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211]
[ 508.195277] ieee80211_do_open+0x86c/0x918 [mac80211]
[ 508.200328] ieee80211_do_open+0x900/0x918 [mac80211]
[ 508.205372] __dev_open+0xcc/0x150
[ 508.208763] __dev_change_flags+0x134/0x198
[ 508.212937] dev_change_flags+0x20/0x60
[ 508.216764] devinet_ioctl+0x3e8/0x748
[ 508.220503] inet_ioctl+0x1e4/0x350
[ 508.223983] sock_do_ioctl+0x48/0x2a0
[ 508.227635] sock_ioctl+0x310/0x4f8
[ 508.231116] do_vfs_ioctl+0xa4/0xac0
[ 508.234681] ksys_ioctl+0x44/0x90
[ 508.237985] __arm64_sys_ioctl+0x1c/0x48
[ 508.241901] el0_svc_common.constprop.1+0x7c/0x100
[ 508.246681] el0_svc_handler+0x18/0x20
[ 508.250421] el0_svc+0x8/0x1c8
[ 508.253465] ---[ end trace c7b90fee13d72c39 ]---
[ 508.261278] ------------[ cut here ]------------ |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: fix kernel crash when the firmware fails to download
Fix kernel crash when the firmware is missing or fails to download.
[ 9.444758] kernel BUG at drivers/pci/msi.c:375!
[ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO)
[ 9.505814] pc : free_msi_irqs+0x180/0x184
[ 9.509897] lr : free_msi_irqs+0x40/0x184
[ 9.513893] sp : ffffffc015193870
[ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2
[ 9.522492] x27: 0000000000000acd x26: 000000000000009a
[ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8
[ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200
[ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480
[ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000
[ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34
[ 9.554277] x15: 0000000000000000 x14: 0000000000080800
[ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000
[ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0
[ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780
[ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000
[ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000
[ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000
[ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000
[ 9.596660] Call trace:
[ 9.599095] free_msi_irqs+0x180/0x184
[ 9.602831] pci_disable_msi+0x100/0x130
[ 9.606740] pci_free_irq_vectors+0x24/0x30
[ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e]
[ 9.615693] pci_device_probe+0xd4/0x14c
[ 9.619604] really_probe+0x134/0x2ec
[ 9.623252] driver_probe_device+0x64/0xfc
[ 9.627335] device_driver_attach+0x4c/0x6c
[ 9.631506] __driver_attach+0xac/0xc0
[ 9.635243] bus_for_each_dev+0x8c/0xd4
[ 9.639066] driver_attach+0x2c/0x38
[ 9.642628] bus_add_driver+0xfc/0x1d0
[ 9.646365] driver_register+0x64/0xf8
[ 9.650101] __pci_register_driver+0x6c/0x7c
[ 9.654360] init_module+0x28/0xfdc [mt7921e]
[ 9.658704] do_one_initcall+0x13c/0x2d0
[ 9.662615] do_init_module+0x58/0x1e8
[ 9.666351] load_module+0xd80/0xeb4
[ 9.669912] __arm64_sys_finit_module+0xa8/0xe0
[ 9.674430] el0_svc_common+0xa4/0x16c
[ 9.678168] el0_svc_compat_handler+0x2c/0x40
[ 9.682511] el0_svc_compat+0x8/0x10
[ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000)
[ 9.692155] ---[ end trace 7621f966afbf0a29 ]---
[ 9.697385] Kernel panic - not syncing: Fatal exception
[ 9.702599] SMP: stopping secondary CPUs
[ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000
[ 9.712456] PHYS_OFFSET: 0xfffffff440000000
[ 9.716625] CPU features: 0x080026,2a80aa18
[ 9.720795] Memory Limit: none |
