| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sensitive data disclosure and manipulation due to unnecessary privileges assignment. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 619, Acronis Backup extension for Plesk (Linux) before build 555, Acronis Backup plugin for DirectAdmin (Linux) before build 147. |
| The Toshiba printers do not implement privileges separation. As for the affected products/models/versions, see the reference URL. |
| After gaining access to the firmware of a charging station, a file at <redacted> can be accessed to obtain default credentials that are the same across all Iocharger AC model EV chargers.
This issue affects Iocharger firmware for AC models before firmware version 25010801.
The issue is addressed by requiring a mandatory password change on first login, it is still recommended to change the password on older models.
Likelihood: Moderate – The attacker will first have to abuse a code execution or file inclusion vulnerability (for example by using <redacted>.sh) to gain access to the <redacted>.json file, or obtain a firmware dump of the charging station or obtain the firmware via other channels.
Impact: Critical – All chargers using Iocharger firmware for AC models started with the same initial password. For models with firmware version before 25010801 a password change was not mandatory. It is therefore very likely that this firmware password is still active on many chargers. These credentials could, once obtained, allow an attacker to log into many Iocharger charging station, and allow them to execute arbitrary commands via the System → Custom page.
CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, and requires high privileges (PR:H), there is no user interaction required (UI:N). The attack leads to a compromised of the confidentialy of the "super user" credentials of the device (VC:H/VI:N/VA:N), and can subsequently be used to full compromise and other devices (SC:H/SI:H/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y). |
| calamares-nixos-extensions provides Calamares branding and modules for NixOS, a distribution of GNU/Linux. Users who installed NixOS through the graphical installer who used manual disk partitioning to create a setup where the system was booted via legacy BIOS rather than UEFI; some disk partitions are encrypted; but the partitions containing either `/` or `/boot` are unencrypted; have their LUKS disk encryption key file in plain text either in `/crypto_keyfile.bin`, or in a CPIO archive attached to their NixOS initrd. `nixos-install` is not affected, nor are UEFI installations, nor was the default automatic partitioning configuration on legacy BIOS systems. The problem has been fixed in calamares-nixos-extensions 0.3.17, which was included in NixOS. The current installer images for the NixOS 24.05 and unstable (24.11) channels are unaffected. The fix reached 24.05 at 2024-08-13 20:06:59 UTC, and unstable at 2024-08-15 09:00:20 UTC. Installer images downloaded before those times may be vulnerable. The best solution for affected users is probably to back up their data and do a complete reinstallation. However, the mitigation procedure in GHSA-3rvf-24q2-24ww should work solely for the case where `/` is encrypted but `/boot` is not. If `/` is unencrypted, then the `/crypto_keyfile.bin` file will need to be deleted in addition to the remediation steps in the previous advisory. This issue is a partial regression of CVE-2023-36476 / GHSA-3rvf-24q2-24ww, which was more severe as it applied to the default configuration on BIOS systems. |
| A security vulnerability in HCL Compass can allow attacker to gain unauthorized database access. |
| A vulnerability has been found in FAST/TOOLS and CI Server. The affected products have built-in accounts with no passwords set. Therefore, if the product is operated without a password set by default, an attacker can break into the affected product.
The affected products and versions are as follows:
FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to R10.04
CI Server R1.01.00 to R1.03.00 |
| Execution with Unnecessary Privileges (CWE-250) in Kibana’s Fleet plugin debug route handlers can lead reading index data beyond their direct Elasticsearch RBAC scope via Privilege Abuse (CAPEC-122). This requires an authenticated Kibana user with Fleet sub-feature privileges (such as agents, agent policies, and settings management). |
| IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 and IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 could allow a locally authenticated user to escalate their privileges to root due to execution with unnecessary privileges than required. |
| Tenda G1V3.1si V16.01.7.8 Firmware V16.01.7.8 was discovered to contain a hardcoded password vulnerability in /etc_ro/shadow, which allows attackers to log in as root. |
| Tenda i24V3.0si V3.0.0.5 Firmware V3.0.0.5 was discovered to contain a hardcoded password vulnerability in /etc_ro/shadow, which allows attackers to log in as root. |
| The Easy WP SMTP by SendLayer – WordPress SMTP and Email Log Plugin plugin for WordPress is vulnerable to information exposure in all versions up to, and including, 2.3.0. This is due to plugin providing the SMTP password in the SMTP Password field when viewing the settings. This makes it possible for authenticated attackers, with administrative-level access and above, to view the SMTP password for the supplied server. Although this would not be useful for attackers in most cases, if an administrator account becomes compromised this could be useful information to an attacker in a limited environment. |
| The BackWPup plugin for WordPress is vulnerable to Plaintext Storage of Backup Destination Password in all versions up to, and including, 4.0.2. This is due to to the plugin improperly storing backup destination passwords in plaintext. This makes it possible for authenticated attackers, with administrator-level access, to retrieve the password from the password input field in the UI or from the options table where the password is stored. |
| The Best WordPress Gallery Plugin – FooGallery plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 2.4.26. This makes it possible for authenticated attackers, with contributor level or higher to read the contents of arbitrary folders on the server, which can contain sensitive information such as folder structure. |
| Kirby CMS through 5.1.4 allows an authenticated user with 'Editor' permissions to cause a persistent Denial of Service (DoS) via a malformed image upload. The application fails to properly validate the return value of the PHP getimagesize() function. When the system attempts to process this file for metadata or thumbnail generation, it triggers a fatal TypeError. |
| The issue was addressed with improved checks. This issue is fixed in macOS Monterey 12.7.4, macOS Sonoma 14.4, macOS Ventura 13.6.5. An app may be able to break out of its sandbox. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, progressive_decompress_tile_upgrade() detects a mismatch via progressive_rfx_quant_cmp_equal() but only emits WLog_WARN, execution continues. The wrapped value (247) is used as a shift exponent, causing undefined behavior and an approximately 80 billion iteration loop (CPU DoS). This issue has been patched in version 3.24.2. |
| Hardcoded Password Vulnerability have been found in CENTUM. Affected products contain a hardcoded password for the user account (PROG) used for CENTUM Authentication Mode within the system. Under the following conditions, there is a risk that an attacker could log in as the PROG user.
The default permission for the PROG users is S1 permission (equivalent to OFFUSER). Therefore, for properly permission-controlled targets of operation and monitoring, even if an attacker user in as the PROG user, the risk of critical operations or configuration changes being performed is considered low. (If the PROG user's permissions have been changed for any reason, there is a risk that operations or configuration changes may be performed under the modified permissions. The CVSS values below are for the default permissions.)
Additionally, exploiting this vulnerability requires an attacker to already have access to the HIS screen controls. Therefore, an attacker can already operate and monitor at that point, regardless of this vulnerability.
The conditions under which this vulnerability is exploited:
If all of the following conditions are met, the affected products are vulnerable to this vulnerability.
-An attacker obtains the hardcoded password using a certain method.
-The HIS with the affected product installed is configured in CTM authentication mode.
-An attacker must have direct access to the aforementioned HIS or be able to break into it remotely using a certain method and perform screen operations.
The affected products and versions are as follows: CENTUM VP R5.01.00 to R5.04.20, R6.01.00 to R6.12.00 and R7.01.00. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, for MQTT deployments using usercodes/passwords: MQTT passwords are incorrectly classified as a non-authenticating identity statement (JWT) and exposed via monitoring endpoints. Versions 2.11.14 and 2.12.6 contain a fix. As a workaround, ensure monitoring end-points are adequately secured. Best practice remains to not expose the monitoring endpoint to the Internet or other untrusted network users. |
| IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 product stores user credentials and other sensitive information in plain text which can be read by a local user. |
| GV Edge Recording Manager (ERM) v2.3.1 improperly runs application components with SYSTEM-level privileges, allowing any local user to gain full control of the operating system.
During installation, ERM creates a Windows service that runs under the LocalSystem account.
When the ERM application is launched, related processes are spawned under SYSTEM privileges rather than the security context of the logged-in user.
Functions such as 'Import Data' open a Windows file dialog operating with SYSTEM permissions, enabling modification or deletion of protected system files and directories.
Any ERM function invoking Windows file open/save dialogs exposes the same risk.
This vulnerability allows local privilege escalation and may result in full system compromise. |
