| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT
RT migration is done aggressively. When a CPU schedules out a high
priority RT task for a lower priority task, it will look to see if there's
any RT tasks that are waiting to run on another CPU that is of higher
priority than the task this CPU is about to run. If it finds one, it will
pull that task over to the CPU and allow it to run there instead.
Normally, this pulling is done by looking at the RT overloaded mask (rto)
which contains all the CPUs in the scheduler domain with RT tasks that are
waiting to run due to a higher priority RT task currently running on their
CPU. The CPU that is about to schedule a lower priority task will grab the
rq lock of the overloaded CPU and move the RT task from that CPU's runqueue
to the local one and schedule the higher priority RT task.
This caused issues when a lot of CPUs would schedule a lower priority task
at the same time. They would all try to grab the same runqueue lock of
the CPU with the overloaded RT tasks. Only the first CPU that got in will
get that task. All the others would wait until they got the runqueue lock
and see there's nothing to pull and do nothing. On systems with lots of
CPUs, this caused a large latency (up to 500us) which is beyond what
PREEMPT_RT is to allow.
The solution to that was to create an RT_PUSH_IPI logic. When any CPU
wanted to pull a task, instead of grabbing the runqueue lock of the
overloaded CPU, it would start by sending an IPI to the overloaded CPU,
and that IPI handler would have the CPU with the waiting RT task do a push
instead. Then that handler would send an IPI to the next CPU with
overloaded RT tasks, and so on. Note, after the first CPU starts this
process, if another CPU wanted to do a pull, it would see that the process
has already begun and would only increment a counter to have the IPIs
continue again.
The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause
a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded
context on PREEMPT_RT but they can run in an interrupt context in non-RT.
If an IPI lands on a CPU that has just woken up multiple RT tasks and the
current CPU is running a non RT or a low priority RT task, instead of
doing a push, it would simply do a schedule on that CPU. But if a softirq
was also executing on this CPU, the schedule would need to wait until the
softirq finished. Until then, the CPU would still be considered overloaded
as there are RT tasks still waiting to run on it.
A live lock occurred on a workload that was doing heavy networking traffic
on a large machine where the softirqs would run 500us out of 750us. And it
would also be waking up RT tasks, causing the RT pull logic to be
constantly executed.
When a softirq triggered on a CPU with RT tasks queued but not running
yet, and the other CPUs would see this CPU as being overloaded, they would
send an IPI over to it. The CPU would notice that the waiting RT tasks are
of higher priority than the currently running task and simply schedule
that CPU instead. But because the softirq was executing, before it could
schedule, it would receive another IPI to do the same. The amount of IPIs
would slow down the currently running softirq so much that before it could
return back to task context, it would execute another softirq never
allowing the CPU to schedule. This live locked that CPU.
As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if
PREEMPT_RT is not enabled. |
| The WooCommerce PayPal Payments plugin for WordPress is vulnerable to Sensitive Information Disclosure due to an Insecure Direct Object Reference in all versions up to, and including, 3.3.2 via the `enqueue_paypal_insights_script_on_order_received()` function due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to obtain sensitive order information including order keys, which can then be leveraged to access full customer billing details (name, email, phone, address) via the WooCommerce Store API within a 10-minute grace period after order creation. |
| The Advanced Woo Labels – Product Labels & Badges for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'bg_color' parameter in all versions up to, and including, 2.48 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| FreeRDP before 3.29.0 contains a buffer over-disclosure vulnerability in the gateway WebSocket transport (libfreerdp/core/gateway/websocket.c). The client's Pong reply reuses a fixed 1024-byte response stream whose length is not sealed to the actual received Ping payload, so a malicious gateway/WebSocket peer sending a non-empty Ping control frame causes the client to reply with an overlong Pong that discloses bytes beyond the received payload (the peer receives the masking key and can unmask the reply). A zero-length Ping reaches an assertion and terminates the client (denial of service). |
| The Advanced Views – Display Custom Fields (ACF, Pods, MetaBox), Posts, CPT and Woo Products anywhere in Gutenberg, Elementor, Divi, Beaver… plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.9.1 via the register_rest_routes. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract sensitive admin-authored editor content — including template markup, CSS code, JavaScript code, and PHP controller variables — for any Layout or Post Selection post on the site. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11009963; Issue ID: MSV-7658. |
| The Subscriptions for WooCommerce plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 2.0.0. This is due to the `save_meta_boxes()` function persisting the `_wps_plan_user_role` membership plan meta from `$_POST` without an allowlist that excludes privileged roles — the only validations applied, `sanitize_key()` and `wp_roles()->is_role()`, both accept `'administrator'` as a valid value, and the UI's `disabled` attribute on the role dropdown is a client-side-only control trivially bypassed via DevTools or a direct POST request; additionally, because the `wps_membership_plan` custom post type is registered with `capability_type => 'post'`, any user who can edit posts satisfies the `current_user_can('edit_post', $post_id)` guard in `save_meta_boxes()`. This makes it possible for authenticated attackers, with Contributor-level access and above, to escalate their privileges to Administrator by storing `'administrator'` as the role granted on membership acquisition, which the Pro companion plugin then applies via `add_role()` during membership lifecycle events. Successful exploitation requires the Subscriptions for WooCommerce Pro companion plugin to be active, as it is the component that reads the stored `_wps_plan_user_role` meta via `get_post_meta()` and calls `add_role()` to apply the role during membership lifecycle events. |
| In Audio HAL, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10981454 (Note: For MT6880, MT6890, MT6988, MT6990) / AUTO00851293 (Note: For MT2735, MT2737); Issue ID: MSV-7638. |
| The Jeg Kit for Elementor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.1.1 via the `enqueue_scripts()` method in `class/dashboard/class-dashboard.php`. The plugin injects a `JkitDashboardOption` JavaScript object containing full plugin inventory (names, versions, paths, active status), system environment details (WordPress version, PHP version, site URLs, server capabilities), and potentially third-party API credentials (Mailchimp API key via `jkit_user_data`) as an inline script on the `post.php` admin page. Because this data is output without any capability check beyond post editing access, any authenticated user with Contributor-level access or above can view this sensitive configuration data by inspecting the page source. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive site configuration data, installed plugin details, and potentially third-party API keys. |
| In ccci, there is a possible out of bounds read due to a missing bounds check. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10981532; Issue ID: MSV-7660. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7748. |
| ClearOS 7.9 contains an OS command injection vulnerability in the Log Viewer component that allows authenticated attackers to execute arbitrary commands by submitting unsanitized input through the filter parameter, which is interpolated directly into a shell command in File.php. Attackers can inject command substitution payloads into the filter parameter to execute arbitrary commands as the webconfig user, and due to extensive NOPASSWD sudo privileges granted to that user by default, immediately escalate to root. |
| In TFA, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10991467; Issue ID: MSV-7764. |
| In DA, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10991588 (Note: For MT6880, MT6890, MT6990, MT6988, MT6986, MT6813) / AUTO00851171 (Note: For MT2735, MT2737); Issue ID: MSV-7790. |
| In hevc decoder, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11104718; Issue ID: MSV-8297. |
| In wlan AP driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00489200; Issue ID: MSV-7834. |
| In Audio HAL, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10960023 (Note: For MT6880, MT6890, MT6980D, MT6988, MT6990) / AUTO00851189 (Note: For MT2735, MT3737); Issue ID: MSV-7586. |
| The Fluent Forms – Customizable Contact Forms, Survey, Quiz, & Conversational Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'param' in all versions up to, and including, 6.2.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| In HFRP, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11049569; Issue ID: MSV-7931. |
| In display, there is a possible information disclosure due to a missing bounds check. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7757. |
