| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Microhard Systems IPn4G 1.1.0 contains a service vulnerability that allows authenticated users to enable a restricted SSH shell with a default 'msshc' user. Attackers can exploit a custom 'ping' command in the NcFTP environment to escape the restricted shell and execute commands with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible uaf for 'bfqq->bic'
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic. |
| Microhard Systems IPn4G 1.1.0 contains hardcoded default credentials that cannot be changed through normal gateway operations. Attackers can exploit these default credentials to gain unauthorized root-level access to the device by logging in with predefined username and password combinations. |
| IBM ApplinX 11.1 is vulnerable due to a privilege escalation vulnerability due to improper verification of JWT tokens. An attacker may be able to craft or modify a JSON web token in order to impersonate another user or to elevate their privileges. |
| In certain Arm CPUs, a CPP RCTX instruction executed on one Processing Element (PE) may inhibit TLB invalidation when a TLBI is issued to the PE, either by the same PE or another PE in the shareability domain. In this case, the PE may retain stale TLB entries which should have been invalidated by the TLBI. |
| A Buffer Access with Incorrect Length Value vulnerability in the jdhcpd daemon of Juniper Networks Junos OS, when DHCP snooping is enabled, allows an unauthenticated, adjacent, attacker to send a DHCP packet with a malformed DHCP option to cause jdhcp to crash creating a Denial of Service (DoS) condition.
Continuous receipt of these DHCP packets using the malformed DHCP Option will create a sustained Denial of Service (DoS) condition.
This issue affects Junos OS:
* from 23.1 before 23.2R2-S3,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R2.
This issue isn't applicable to any versions of Junos OS before 23.1R1.
This issue doesn't affect vSRX Series which doesn't support DHCP Snooping.
This issue doesn't affect Junos OS Evolved.
There are no indicators of compromise for this issue. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the pfe (packet forwarding engine) of Juniper Networks Junos OS on MX Series causes a port within a pool to be blocked leading to Denial of Service (DoS).
In a DS-Lite (Dual-Stack Lite) and NAT (Network Address Translation) scenario, when crafted IPv6 traffic is received and prefix-length is set to 56, the ports assigned to the user will not be freed. Eventually, users cannot establish new connections. Affected FPC/PIC need to be manually restarted to recover.
Following is the command to identify the issue:
user@host> show services nat source port-block
Host_IP External_IP Port_Block Ports_Used/ Block_State/
Range Ports_Total Left_Time(s)
2001:: x.x.x.x 58880-59391 256/256*1 Active/- >>>>>>>>port still usedThis issue affects Junos OS on MX Series:
* from 21.2 before 21.2R3-S8,
* from 21.4 before 21.4R3-S7,
* from 22.1 before 22.1R3-S6,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2-S1,
* from 23.4 before 23.4R1-S2, 23.4R2.
This issue does not affect versions before 20.2R1. |
| An Out-of-bounds Read vulnerability in Juniper Networks Junos OS and Junos OS Evolved's routing protocol daemon (rpd) allows an unauthenticated, network-based attacker to send malformed BGP packets to a device configured with packet receive trace options enabled to crash rpd.
This issue affects:
Junos OS:
* from 21.2R3-S8 before 21.2R3-S9,
* from 21.4R3-S7 before 21.4R3-S9,
* from 22.2R3-S4 before 22.2R3-S5,
* from 22.3R3-S2 before 22.3R3-S4,
* from 22.4R3 before 22.4R3-S5,
* from 23.2R2 before 23.2R2-S2,
* from 23.4R1 before 23.4R2-S1,
* from 24.2R1 before 24.2R1-S1, 24.2R2.
Junos OS Evolved:
* from 21.4R3-S7-EVO before 21.4R3-S9-EVO,
* from 22.2R3-S4-EVO before 22.2R3-S5-EVO,
* from 22.3R3-S2-EVO before 22.3R3-S4-EVO,
* from 22.4R3-EVO before 22.4R3-S5-EVO,
* from 23.2R2-EVO before 23.2R2-S2-EVO,
* from 23.4R1-EVO before 23.4R2-S1-EVO,
* from 24.2R1-EVO before 24.2R1-S2-EVO, 24.2R2-EVO.
This issue requires a BGP session to be established.
This issue can propagate and multiply through multiple ASes until reaching vulnerable devices.
This issue affects iBGP and eBGP.
This issue affects IPv4 and IPv6.
An indicator of compromise may be the presence of malformed update messages in a neighboring AS which is unaffected by this issue:
For example, by issuing the command on the neighboring device:
show log messages
Reviewing for similar messages from devices within proximity to each other may indicate this malformed packet is propagating:
rpd[<pid>]: Received malformed update from <IP address> (External AS <AS#>)
and
rpd[<pid>]: Malformed Attribute |
| A Missing Release of Memory after Effective Lifetime vulnerability in the Juniper Tunnel Driver (jtd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-based attacker to cause Denial of Service.
Receipt of specifically malformed IPv6 packets, destined to the device, causes kernel memory to not be freed, resulting in memory exhaustion leading to a system crash and Denial of Service (DoS). Continuous receipt and processing of these packets will continue to exhaust kernel memory, creating a sustained Denial of Service (DoS) condition.
This issue only affects systems configured with IPv6.
This issue affects Junos OS Evolved:
* from 22.4-EVO before 22.4R3-S5-EVO,
* from 23.2-EVO before 23.2R2-S2-EVO,
* from 23.4-EVO before 23.4R2-S2-EVO,
* from 24.2-EVO before 24.2R1-S2-EVO, 24.2R2-EVO.
This issue does not affect Juniper Networks Junos OS Evolved versions prior to 22.4R1-EVO. |
| A NULL Pointer Dereference vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker causing specific, valid control traffic to be sent out of a Dual-Stack (DS) Lite tunnel to crash the flowd process, resulting in a Denial of Service (DoS). Continuous triggering of specific control traffic will create a sustained Denial of Service (DoS) condition.
On all SRX platforms, when specific, valid control traffic needs to be sent out of a DS-Lite tunnel, a segmentation fault occurs within the flowd process, resulting in a network outage until the flowd process restarts.
This issue affects Junos OS on SRX Series:
* All versions before 21.2R3-S9,
* from 21.4 before 21.4R3-S9,
* from 22.2 before 22.2R3-S5,
* from 22.4 before 22.4R3-S6,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2. |
| An Improper Input Validation vulnerability in the Juniper DHCP Daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause the jdhcpd process to crash resulting in a Denial of Service (DoS).
When a specifically malformed DHCP packet is received from a DHCP client, the jdhcpd process crashes, which will lead to the unavailability of the DHCP service and thereby resulting in a sustained DoS. The DHCP process will restart automatically to recover the service.
This issue will occur when dhcp-security is enabled.
This issue affects Junos OS:
* All versions before 21.2R3-S9,
* from 21.4 before 21.4R3-S10,
* from 22.2 before 22.2R3-S6,
* from 22.4 before 22.4R3-S6,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S4,
* from 24.2 before 24.2R2;
Junos OS Evolved: * from 22.4 before 22.4R3-S6-EVO,
* from 23.2 before 23.2R2-S3-EVO,
* from 23.4 before 23.4R2-S4-EVO,
* from 24.2 before 24.2R2-EVO.
. |
| An Improper Input Validation vulnerability in the syslog stream TCP transport of Juniper Networks Junos OS on MX240, MX480 and MX960 devices with MX-SPC3 Security Services Card allows an unauthenticated, network-based attacker, to send specific spoofed packets to cause a CPU Denial of Service (DoS) to the MX-SPC3 SPUs.
Continued receipt and processing of these specific packets will sustain the DoS condition.
This issue affects Junos OS: * All versions before 22.2R3-S6,
* from 22.4 before 22.4R3-S4,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S4,
* from 24.2 before 24.2R1-S2, 24.2R2
An indicator of compromise will indicate the SPC3 SPUs utilization has spiked.
For example:
user@device> show services service-sets summary
Service sets CPU
Interface configured Bytes used Session bytes used Policy bytes used utilization
"interface" 1 "bytes" (percent%) "sessions" ("percent"%) "bytes" ("percent"%) 99.97 % OVLD <<<<<< look for high CPU usage |
| The server supports authentication methods in which credentials are sent in plaintext over unencrypted channels. If an attacker were to intercept traffic between a client and this server, the credentials would be exposed. |
| The backup ZIPs are not signed by the application, leading to the possibility that an attacker can download a backup ZIP, modify and re-upload it. This allows the attacker to disrupt the application by configuring the services in a way that they are unable to run, making the application unusable. They can redirect traffic that is meant to be internal to their own hosted services and gathering information. |
| Missing Authorization vulnerability in Metagauss EventPrime eventprime-event-calendar-management allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects EventPrime: from n/a through <= 4.2.8.0. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in POSIMYTH Nexter Blocks the-plus-addons-for-block-editor allows Retrieve Embedded Sensitive Data.This issue affects Nexter Blocks: from n/a through <= 4.6.3. |
| Missing Authorization vulnerability in Theme-one The Grid the-grid allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects The Grid: from n/a through < 2.8.0. |
| Missing Authorization vulnerability in ExpressTech Systems Quiz And Survey Master quiz-master-next allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Quiz And Survey Master: from n/a through <= 10.3.3. |
| Missing Authorization vulnerability in Brecht WP Recipe Maker wp-recipe-maker allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Recipe Maker: from n/a through <= 10.2.4. |
| Missing Authorization vulnerability in Roxnor GetGenie getgenie allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects GetGenie: from n/a through <= 4.3.0. |
