| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered on the D-Link DWR-932B router. /var/miniupnpd.conf has no deny rules. |
| GNU patch 2.7.2 and earlier allows remote attackers to cause a denial of service (memory consumption and segmentation fault) via a crafted diff file. |
| By flooding a Juniper Networks router running Junos OS with specially crafted IPv6 traffic, all available resources can be consumed, leading to the inability to store next hop information for legitimate traffic. In extreme cases, the crafted IPv6 traffic may result in a total resource exhaustion and kernel panic. The issue is triggered by traffic destined to the router. Transit traffic does not trigger the vulnerability. This issue only affects devices with IPv6 enabled and configured. Devices not configured to process IPv6 traffic are unaffected by this vulnerability. This issue was found during internal product security testing. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. Affected releases are Juniper Networks Junos OS 11.4 prior to 11.4R13-S3; 12.3 prior to 12.3R3-S4; 12.3X48 prior to 12.3X48-D30; 13.3 prior to 13.3R10, 13.3R4-S11; 14.1 prior to 14.1R2-S8, 14.1R4-S12, 14.1R8; 14.1X53 prior to 14.1X53-D28, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R3-S10, 14.2R4-S7, 14.2R6; 15.1 prior to 15.1F2-S5, 15.1F5-S2, 15.1F6, 15.1R3; 15.1X49 prior to 15.1X49-D40; 15.1X53 prior to 15.1X53-D57, 15.1X53-D70. |
| In all Qualcomm products with Android releases from CAF using the Linux kernel, when downloading a file, an excessive amount of memory may be consumed. |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| The Googlemaps plugin 3.2 and earlier for Joomla! allows remote attackers with control of a sub-domain belonging to a victim domain to cause a denial of service via the 'url' parameter to plugin_googlemap3_kmlprxy.php. NOTE: this vulnerability exists because of an incomplete fix for CVE-2013-7428. |
| The jpc_dec_tiledecode function in jpc_dec.c in JasPer before 1.900.8 allows remote attackers to cause a denial of service (assertion failure) via a crafted file. |
| A vulnerability in Cisco WebEx Network Recording Player for WebEx Recording Format (WRF) files could allow an attacker to cause a denial of service (DoS) condition. An attacker could exploit this vulnerability by providing a user with a malicious WRF file via email or URL and convincing the user to open the file. A successful exploit could cause an affected player to crash, resulting in a DoS condition. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, and Cisco WebEx WRF players. Cisco Bug IDs: CSCve30294, CSCve30301. |
| A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. |
| A vulnerability in the TCP state machine of Cisco RF Gateway 1 devices could allow an unauthenticated, remote attacker to prevent an affected device from delivering switched digital video (SDV) or video on demand (VoD) streams, resulting in a denial of service (DoS) condition. The vulnerability is due to a processing error with TCP connections to the affected device. An attacker could exploit this vulnerability by establishing a large number of TCP connections to an affected device and not actively closing those TCP connections. A successful exploit could allow the attacker to prevent the affected device from delivering SDV or VoD streams to set-top boxes. Cisco Bug IDs: CSCvf19887. |
| Crypto++ 5.6.4 incorrectly uses Microsoft's stack-based _malloca and _freea functions. The library will request a block of memory to align a table in memory. If the table is later reallocated, then the wrong pointer could be freed. |
| A vulnerability in 802.11 Wireless Multimedia Extensions (WME) action frame processing in Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the 802.11 WME packet header. An attacker could exploit this vulnerability by sending malformed 802.11 WME frames to a targeted device. A successful exploit could allow the attacker to cause the WLC to reload unexpectedly. The fixed versions are 8.0.140.0, 8.2.130.0, and 8.3.111.0. Cisco Bug IDs: CSCva86353. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| The validateSignature method in the SAML2\Utils class in SimpleSAMLphp before 1.14.10 and simplesamlphp/saml2 library before 1.9.1, 1.10.x before 1.10.3, and 2.x before 2.3.3 allows remote attackers to spoof SAML responses or possibly cause a denial of service (memory consumption) by leveraging improper conversion of return values to boolean. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE 3.16 could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a race condition that could occur when the affected software processes an SNMP read request that contains certain criteria for a specific object ID (OID) and an active crypto session is disconnected on an affected device. An attacker who can authenticate to an affected device could trigger this vulnerability by issuing an SNMP request for a specific OID on the device. A successful exploit will cause the device to restart due to an attempt to access an invalid memory region. The attacker does not control how or when crypto sessions are disconnected on the device. Cisco Bug IDs: CSCvb94392. |
| A vulnerability in SMART-SSL Accelerator functionality for Cisco Wide Area Application Services (WAAS) 6.2.1, 6.2.1a, and 6.2.3a could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition where the WAN optimization could stop functioning while the process restarts. The vulnerability is due to a Secure Sockets Layer/Transport Layer Security (SSL/TLS) alert being incorrectly handled when in a specific SSL/TLS connection state. An attacker could exploit this vulnerability by establishing a SMART-SSL connection through the targeted device. The attacker would then send a crafted stream of SSL/TLS traffic. An exploit could allow the attacker to cause a DoS condition where WAN optimization could stop processing traffic for a short period of time. Cisco Bug IDs: CSCvb71133. |
| Cybozu Garoon before 4.2.1 allows remote attackers to cause a denial of service. |
| A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072. |
