| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| llama.cpp before b3701 contains an out-of-bounds read vulnerability in llama_decode_internal and llama_encode_internal that allows remote unauthenticated attackers to read memory by supplying unvalidated token IDs. Attackers can send integer-array prompts to the llama-server /completion endpoint with IDs outside 0 to n_vocab to read embedding memory out of bounds or crash the process. |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### snapshot command index-out-of-bound |
| frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1. |
| Isar is an integration system for automated root filesystem generation. In versions 0.11 and newer, /etc/apt/trusted.gpg.d is created manually during bootstrap setup to be able to deploy local keys. By that, the directory is owned by the calling user (the one that executes Isar) instead of root. If the calling user's id is identical to one of an unprivileged user inside the image, this user is able to alter existing keys and deploy new ones, silently breaking the apt repo integrity protection. The issue is has no impact on those images that use an immutable rootfs, or if apt is never invoked. Changing only the keys does not trigger an exploit, it's just one step in a chain. An attacker would also have to manipulate a remote repo or intercept non-secure communication with it. This issue has been patched via commit 29e84ed. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, alternateArrayAccess in src/mms/iso_mms/server/mms_read_service.c does not validate an alternate-access sub-array range when numberOfElements is greater than zero. An out-of-range MmsValue_getElement call returns NULL, and the sub-array branch passes that value to MmsValue_isDeletable, causing a NULL pointer dereference. A remote MMS Read request can therefore crash servers whose data models contain arrays, while the single-element error path handles the same invalid index safely. This issue is fixed in version 1.6.2. |
| Improper validation of array index vulnerability in Velneo vServer. This issue affects vServer: from 36.0 before 36.6 and from 37.0 before 37.2. |
| `_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table.
The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this.
Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate vmw_surface_metadata::array_size
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate free block extents against the partition length
udf_free_blocks() checks the logical block number and count against the
partition length, but drops the extent offset from that final bound. A
crafted extent can pass the guard while logicalBlockNum + offset + count
points past the partition, which later indexes past the space bitmap
array.
A single ftruncate(2) on a file backed by such an extent reliably
panics the kernel. This is a local availability issue. On desktop
systems where UDisks/polkit allows the active user to mount removable
UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply
the crafted filesystem and trigger the panic by truncating a writable
file on it. Systems that require root or CAP_SYS_ADMIN to mount the
image have a higher prerequisite.
No confidentiality or integrity impact is claimed: the reproduced
primitive is an out-of-bounds read of a bitmap pointer slot followed by
a kernel panic.
Use the already computed logicalBlockNum + offset + count value for the
partition length check. Also make load_block_bitmap() reject an
out-of-range block group before indexing s_block_bitmap[], so corrupted
callers cannot walk past the flexible array. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: simple-mux: Fix enum control bounds check
simple_mux_control_put() rejects values greater than e->items, but
enum control values are zero based. For the two-entry mux used by this
driver, valid values are 0 and 1, so value 2 must be rejected as well.
Accepting e->items can store an invalid mux state, pass it to the GPIO
setter, and pass it on to the DAPM mux update path where it is used as
an index into the enum text array.
Use the same >= e->items check used by the ASoC enum helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: validate rx_req_idx to prevent out-of-bounds array access
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
TID getting from ieee80211_get_tid() might be out of range of array size
of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise,
UBSAN warn:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30
index 10 is out of range for type 'rtl_tid_data [9]' |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: reject a kset that overruns its segment
cache_replay(), the writeback worker and the GC worker read a kset of
get_kset_onmedia_size() bytes and advance the position by it. A forged
key_num makes that size exceed the segment's remaining space, so the
advance walks past the segment and trips the cache_pos_advance() BUG_ON.
Reject a kset whose on-media size exceeds cache_seg_remain() before use. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject non-negative offsets in stack_slot_obj_get_spi()
bpf_get_spi() computes (-off - 1) / BPF_REG_SIZE using C division,
which truncates toward zero. For off == 0, this produces spi 0, the
same index used by the valid stack slot at fp-8.
stack_slot_obj_get_spi() currently checks alignment and the resulting
spi bounds, but does not reject the non-negative offset itself. It can
therefore validate a PTR_TO_STACK register holding fp+0 against an
iterator stored at fp-8 even though the runtime receives the actual fp+0
pointer. An effectful iterator kfunc can then interpret memory outside
the BPF stack as iterator state.
Reject non-negative offsets before converting the offset to an spi. All
valid stack objects begin at a negative offset from the frame pointer. |
| FreeRDP before 3.32.0 stores the server-supplied signed MS-RDPEGT geometry origin unchecked in an unsigned video surface coordinate, so the blit clamp in gdiVideoShowSurface() wraps in 32-bit arithmetic and is skipped. A malicious RDP server can send a negative topLevelLeft to clients connecting with /video, causing an out-of-bounds write of decoded H.264 picture data or a client abort. |
| Improper validation of array index vulnerability in Samsung Open Source Vyond allows Input Data Manipulation.
This issue affects Vyond: before be6e297b0c4836e20d73b2f8a40a561ea496ebaa. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: handle inline data with a nonzero offset
nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset
into the per-command inline scatterlist. The bounds check admits any
offset with off + len <= inline_data_size, but the mapping still assumes
the data begins in the first inline page:
sg->offset = off;
sg->length = min_t(int, len, PAGE_SIZE - off);
When a port is configured with inline_data_size > PAGE_SIZE (settable up
to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size]
makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and
the block backend reads far past the first inline page. num_pages(len)
also ignores the offset, so an in-bounds offset whose [off, off+len)
span crosses a page boundary under-counts the scatterlist.
Map the offset properly: split it into a page index and an in-page
offset, start the scatterlist at that page, and size the page count from
page_off + len. Because the request scatterlist may now start at
inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL
identity test in nvmet_rdma_release_rsp() to a range test; otherwise the
persistent inline scatterlist is mistaken for an allocated one and
nvmet_req_free_sgls() frees an inline page (and warns in
free_large_kmalloc()). |
