| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw (npm package `openclaw`) versions >= 2026.7.2 and < 2026.9.2 contain a race condition in the Discord realtime voice transcript path. Concurrent control-classified voice transcripts could consume speaker context belonging to another participant after an asynchronous control check, causing a transcript to inherit another speaker's owner status. In Discord agent-proxy voice sessions using the affected realtime control path, an utterance from a non-owner participant could reach the downstream agent boundary marked as owner, so owner-sensitive behavior is applied to the wrong speaker. Exploitation depends on concurrent transcript timing and on the tools and commands available to the affected agent. The issue is fixed in 2026.9.2; as a workaround, disable Discord realtime voice for agents that distinguish owner and non-owner senders. |
| OpenClaw (npm package 'openclaw') versions >= 2026.5.28 and < 2026.8.1 mishandle archive listings in the tar.bz2 skill installer: bounded command-output suffixes were treated as complete listings of the archive. A crafted .tar.bz2/.tbz2 skill archive can push prohibited entries out of both retained listings so that entry-count and size checks pass, and the archive is then extracted in full. If an operator approves installation of such a malicious or compromised skill archive, over-limit files or entry counts are persisted in the skill tools directory, consuming disk space or inodes. The issue bypasses OpenClaw's extraction budgets but does not by itself execute archive contents. Fixed in 2026.8.1. |
| OpenClaw (npm package 'openclaw') before 2026.8.1 does not apply the originating sender's global or per-agent toolsBySender policy when handling outbound attachments. A sender that has been explicitly denied filesystem read tools can still cause a known local file to be read and returned via a final-response media directive or a message attachment, disclosing local file contents to an admitted requester whose agent turn did not include the read tool. Exploitation requires knowledge or derivation of a useful host path and a delivery flow that accepts local attachments. The issue is fixed in version 2026.8.1. |
| OpenClaw versions before 2026.8.1 contain an authorization bypass vulnerability in webhook TaskFlow cancellation that allows attackers to cancel unrelated sessions. An attacker with a webhook route secret can supply an arbitrary child session key to cancel ACP or subagent work outside the route's configured authority. |
| OpenClaw versions before 2026.8.1 fail to bind working directory context to reusable exec approvals, allowing approved commands to execute in different directories. Attackers with an allow-always approval can reuse it to run the same command against unreviewed files or repositories with materially different effects. |
| OpenClaw's Discord integration (npm package @openclaw/discord) before version 2026.9.3 could lose the sender-scoped media policy in the emoji and sticker upload actions before loading a local file. A sender permitted to invoke those actions could cause OpenClaw to read a host path that the same sender's configured media roots would otherwise reject, placing bytes from an out-of-policy local file into an outbound emoji or sticker upload. Exploitation requires access to the guild asset action and knowledge or derivation of a useful local path; the issue does not permit unrestricted filesystem browsing or code execution. The issue is fixed in @openclaw/discord 2026.9.3. |
| ClawHub (openclaw/clawhub) application/backend contains a flaw in the skill report moderation flow: four distinct ordinary authenticated accounts can report a visible skill and trigger automatic hiding (moderationStatus: hidden) of that skill from the catalog without any moderator decision. Because the reporter quota counts only reports filed against visible targets, the same accounts can repeat the process against additional skills; official skills are not exempt. The issue was confirmed at revision cbfee7343ddc867316dd9b3de6fa8856730f9f41; the complete historical affected range was not established. The fix (PR #3681) is included in revision 8c2de6c506bb4efabe3f0c2ffb8370b9e23d4650; self-hosted deployments should update to that revision or a later descendant. The npm CLI and OpenClaw runtime are separate products and are not affected. |
| OpenClaw versions 2026.5.1 through 2026.7.0 fail to apply the configured exec approval path to Google Meet node commands. The googlemeet.chrome command accepts caller-supplied audio command arrays and executes them on a paired node without going through the normal system.run approval flow. In deployments with the Google Meet plugin enabled, a paired Chrome node, and the googlemeet.chrome node command allowed, a tool-enabled agent able to invoke that command can execute attacker-selected processes on the paired node, impacting files, credentials, browser profiles, and availability on that node. The issue is fixed in 2026.7.1; as a workaround, remove googlemeet.chrome from allowed node commands or disable the Google Meet plugin. |
| ClawHub (the openclaw/clawhub application/backend) does not bind anonymous HTTP API requests to a trusted caller identity, so all direct anonymous API requests share a single default quota allowance. A remote, unauthenticated caller can drain that shared allowance and thereby deny or degrade API access for unrelated visitors. In addition, when the TRUST_FORWARDED_IPS option is enabled without an authenticated edge/proxy, clients can supply arbitrary forwarded IP headers to select quota identities of their choosing and evade rate limiting. The issue was confirmed at revision cbfee7343ddc867316dd9b3de6fa8856730f9f41; the complete historical affected range was not established. It is fixed in revision 8c2de6c506bb4efabe3f0c2ffb8370b9e23d4650 (PR #3684), where direct anonymous calls are redirected to the public API origin without consuming quota and forged identity assertions return HTTP 401. The npm CLI and OpenClaw runtime are separate products and are not affected. |
| ClawHub (openclaw/clawhub) contains an incorrect authorization vulnerability in the ClawHub application/backend: an organization-owned skill retains the ownerUserId of its original publisher, and transfer and lifecycle authorization checks trust that historical user before requiring current organization privileges. An authenticated user who originally published an organization skill can therefore transfer, delete, or restore that skill — taking control of its trusted name and history — even after their organization privileges have been revoked or downgraded. The issue was confirmed at revision cbfee7343ddc867316dd9b3de6fa8856730f9f41; the complete historical affected range was not established. It is fixed by PR #3680, included in revision 8c2de6c506bb4efabe3f0c2ffb8370b9e23d4650, which was deployed to clawhub.ai on 2026-09-11; self-hosted deployments should update to that revision or a later descendant. The npm CLI and OpenClaw runtime are separate products and are not affected. |
| The @openclaw/slack npm package before 2026.8.1 contains an authorization flaw in its Slack download-file handler: when a file lacks the share metadata used to prove it belongs to the requested conversation, the conversation-authorization check fails open. An authenticated caller restricted to a single conversation who knows or obtains a file identifier can therefore download file contents from outside that conversation's scope, disclosing data across configured conversation boundaries. The issue does not allow listing arbitrary Slack files and does not bypass Slack authentication itself. The issue is fixed in version 2026.8.1. |
| OpenClaw versions before 2026.7.1 fail to properly authorize non-owner users executing MCP configuration changes through /mcp set and /mcp unset commands. Attackers can persist arbitrary stdio MCP commands that execute with OpenClaw process privileges when configuration loads, compromising host confidentiality, integrity, and availability. |
| OpenClaw is an agent gateway distributed via npm. In versions >= 2026.4.10 and < 2026.7.1, persistent memory dreaming mutations omit owner permission checks. An authorized but non-owner external-channel sender can issue the persistent '/dreaming on' and '/dreaming off' commands to enable or disable the Gateway's Memory Core dreaming behavior, disabling background memory processing or re-enabling durable memory promotion where the owner expected it to remain disabled; the practical confidentiality, integrity, and availability impact depends on stored conversation material and subsequent memory use. Read-only status and help commands remain governed by normal command policy. The issue is fixed in version 2026.7.1. As a workaround, disable dreaming commands in external channels or restrict channel command access to owners. |
| OpenClaw (npm package 'openclaw') before 2026.7.1 does not enforce the administrator scope requirement on browser control when it is reached through the node.invoke method, although direct browser.request access requires administrator scope. In Gateway deployments that honor caller identity and narrower operator scopes, a write-scoped caller with access to a connected browser-capable node can inspect pages, navigate tabs, or interact with browser-visible applications without the configured admin requirement; practical impact depends on the browser profile and signed-in state. Shared-secret token and password callers are considered fully trusted operators under OpenClaw's security model and are not affected. The issue is fixed in 2026.7.1. |
| OpenClaw is an npm-distributed agent runtime. In versions >= 2026.2.26 and < 2026.7.1, PowerShell command analysis on Windows hosts running in exec allowlist mode could approve an exact executable resolved from PATH but subsequently execute a same-named executable located in the workspace directory. If lower-trust content can place an executable with an approved basename into an agent-writable workspace and steer an approved PowerShell command that uses a bare executable name, OpenClaw may run the workspace file instead of the allowlisted path, executing arbitrary code with the privileges of the Gateway or node-host user. The issue does not require replacement of the approved executable itself. Version 2026.7.1 contains a fix; as a workaround, avoid bare executable names in approved PowerShell commands and keep executable files out of agent-writable workspaces. |
| OpenClaw (npm package 'openclaw') before 2026.7.1 improperly handles case sensitivity in the model-facing cron tool: a mixed-case payload kind can pass the agent-facing shell-execution guard and later normalize into a command job. An actor able to steer a tool-enabled agent can therefore create a persistent cron job that executes attacker-selected commands with the privileges of the OpenClaw process user, resulting in access to host files and credentials and impact to scheduled service availability. The issue is limited to cron jobs created or edited through the model-facing cron tool; direct CLI and authorized Gateway scheduling surfaces are trusted operator controls. Fixed in 2026.7.1. |
| OpenClaw versions before 2026.8.1 contain a server-side request forgery vulnerability in browser wait predicates that allows attackers to bypass SSRF protections by reaching blocked destinations. Attackers can use the wait --fn function against an existing browser session to request loopback or private destinations without navigation checks applied to other browser actions. |
| OpenClaw versions >= 2026.3.25 and < 2026.8.1 apply invalid-token rate limiting for Synology Chat webhooks before authentication and key the limit on the raw proxy socket address. In deployments where OpenClaw sits behind a trusted reverse proxy or tunnel and multiple external clients share a single socket address, an unauthenticated sender can exhaust the shared invalid-token budget, causing subsequent legitimate Synology Chat webhook callbacks to be rejected until the rate-limit window expires. The attacker cannot obtain a valid token or read message data; the impact is temporary loss of channel availability. Fixed in 2026.8.1. |
| OpenClaw versions before 2026.8.1 fail to properly restrict access to operator command cron jobs, allowing model-visible agent callers to read and execute ownerless command jobs. Attackers can inspect stored environment variables and force-run disabled or unscheduled command jobs to access secrets and execute operator-authored commands. |
| OpenClaw (npm package `openclaw`) before 2026.8.1 does not neutralize leading characters that spreadsheet applications interpret as formulas when the Control UI exports session data to CSV. Although session labels were quoted as CSV text, a lower-trust participant who can influence a session label or the first user message can place a formula-like cell in the Usage export; if an operator opens that export in a spreadsheet application with formula evaluation enabled, the cell may be evaluated with the permissions of the spreadsheet user. OpenClaw itself does not evaluate the formula, and practical impact depends on the spreadsheet application's security settings. The issue is fixed in 2026.8.1. |
