Export limit exceeded: 426098 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 426098 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (426098 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99301 1 Linux 2 Linux, Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.
CVE-2026-99302 1 Linux 2 Linux, Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)
CVE-2026-99304 1 Linux 2 Linux, Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8)
CVE-2026-99306 1 Linux 2 Linux, Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks it with newmap->possible_max_rank, which comes straight off the wire: ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then overwrites it with the size of the "in" set. Neither is bounded by CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks than the bitmap holds makes test_bit() read past the end of targets[]. The clear_bit() loop above indexes the same bitmap, though it is additionally bounded by mdsc->max_sessions. The map arrives on the monitor connection, which is unauthenticated in legacy msgr mode. CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the reserved inode ranges in super.h are laid out one rank apart over that span, so a map claiming more ranks is corrupt. Reject it where the rank space is established rather than letting the count reach check_new_map(). BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968) Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127 Workqueue: ceph-msgr ceph_con_workfn Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) check_new_map (fs/ceph/mds_client.c:5968) ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060) extra_mon_dispatch (fs/ceph/super.c:802) mon_dispatch (net/ceph/mon_client.c:1483) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> The buggy address belongs to stack of task kworker/1:2/127 and is located at offset 288 in frame: check_new_map (fs/ceph/mds_client.c:5846) This frame has 1 object: [32, 288) 'targets'
CVE-2026-99310 1 Linux 2 Linux, Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: nfsd: hold cl_lock in client_has_openowners() client_has_openowners() walks clp->cl_openowners and reads so_stateids without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched creds can use-after-free the nfs4_openowner. BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140 fs/nfsd/nfs4state.c:3718 client_has_openowners() nfsd4_exchange_id nfsd4_proc_compound nfsd_dispatch svc_process Take clp->cl_lock while client_has_openowners() walks the openowner list.
CVE-2026-126232 1 Fortinet 4 Fortianalyzer, Fortianalyzercloud, Fortimanager and 1 more 2026-11-16 7.5 High
A improper certificate validation vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer Cloud 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager Cloud 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11 may allow a MITM attacker to impersonate the radius server via a rogue RADIUS server.
CVE-2026-99291 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SMB2 CREATE response buffer overflow smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE (448-byte) buffer for a single SMB2_CREATE response. That buffer also holds a 4-byte length field, which only leaves 444 bytes for the SMB2 body. The AAPL response made this buffer too small. After 8f1b796ff113, a request with AAPL response contexts may need at least 456 bytes. In the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128 bytes, and writes 12 bytes past the allocation. KASAN reports: BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0 Write of size 128 at addr ffff88800370954c by task kworker/0:0/9 ... create_aapl_rsp_buf+0x31/0x6e0 smb2_open+0x58f9/0xef10 ... smb2_allocate_rsp_buf+0x19d/0x370 ... The buggy address is located 332 bytes inside of allocated 448-byte region [ffff888003709400, ffff8880037095c0) Reserve enough space for any fixed CREATE response KSMBD can build. Store the required allocation size in the per-dialect values table. This keeps the small buffer for other commands and avoids using the max transaction buffer for every CREATE.
CVE-2026-99298 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: net: ipv4: add zero check for snd_cwnd_clamp When RTAX_CWND is locked, user is able to pass 0 into it. This could lead to writing 0 to tp->snd_cwnd, leading to a division by zero error. Oops: divide error: 0000 [#1] SMP KASAN NOPTI Call Trace: <IRQ> tcp_reno_cong_avoid (net/ipv4/tcp_cong.c:510 (discriminator 1)) tcp_ack (net/ipv4/tcp_input.c:3517 net/ipv4/tcp_input.c:3873 net/ipv4/tcp_input.c:4440) tcp_rcv_established (net/ipv4/tcp_input.c:6685) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1854) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2248) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207 (discriminator 1)) ip_local_deliver_finish (net/ipv4/ip_input.c:241 (discriminator 1)) ip_local_deliver (./include/linux/netfilter.h:325 ./include/linux/netfilter.h:319 net/ipv4/ip_input.c:262) ip_rcv (./include/net/dst.h:481 (discriminator 6) net/ipv4/ip_input.c:492 (discriminator 6) ./include/linux/netfilter.h:325 (discriminator 6) ./include/li) __netif_receive_skb_one_core (net/core/dev.c:6297 (discriminator 4)) __netif_receive_skb (net/core/dev.c:6410) process_backlog (net/core/dev.c:6761) __napi_poll.constprop.0 (net/core/dev.c:7830) net_rx_action (net/core/dev.c:7893 net/core/dev.c:8050) handle_softirqs (kernel/softirq.c:645) __irq_exit_rcu (kernel/softirq.c:679 kernel/softirq.c:519 kernel/softirq.c:758) irq_exit_rcu (kernel/softirq.c:775) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1062 (discriminator 35) arch/x86/kernel/apic/apic.c:1062 (discriminator 35)) RIP: 0010:tcp_cong_avoid_ai (net/ipv4/tcp_cong.c:482) Fix by checking if user pass in zero as parameter and if lock is present.
CVE-2026-116288 2026-11-16 N/A
In affected versions of Octopus Server, a user with permission to edit team scoped roles could escalate their privileges to deploy to projects and environments that they were not authorised to so.
CVE-2026-15707 2026-11-16 N/A
An uncontrolled search path vulnerability (CWE-427) in statically linked OpenSSL libraries within Netskope Client (stAgentSvc.exe) and Endpoint DLP (epdlp.exe) on Windows allows an authenticated local attacker to execute arbitrary code with elevated SYSTEM privileges. The services retain internal build-time paths referencing a secondary drive location. On Windows systems where default volume permissions allow standard users to create root-level directories on secondary drives, an attacker can place a malicious configuration file (openssl.cnf) that is loaded under the NT AUTHORITY\SYSTEM context upon service startup or system reboot. Under default operating system permissions, macOS and Linux are not susceptible, and mobile platforms are unaffected.
CVE-2026-121880 2 Posit, Posit Software, Pbc 4 Rstudio Server, Workbench, Posit Workbench and 1 more 2026-11-16 N/A
Authorization bypass through user-controlled key in the localhost port-proxy (/p/<token>/) in Posit Software, PBC RStudio Server and Posit Workbench before 2026.08.0 allows remote authenticated users to reach web applications and other services bound to 127.0.0.1 under a different user's session, and to view their live rendered content and data, via a proxy URL constructed from the attacker's own port token for an arbitrary port number. The port token is a documented obfuscation measure and not an authorization boundary, and the proxy does not verify that the requested port belongs to the requesting user's session. NOTE: exploitation requires an authenticated account on the same multi-user server and a target service listening on localhost at the time of access. Impact may be greater on hosts that co-locate additional privileged localhost services, and the bypass is not prevented by allow-shell=false; no setting restricts the port-proxy without disabling all application proxying.
CVE-2026-129545 2026-11-16 8.8 High
Kalmia through 0.2.0 contains a privilege escalation vulnerability that allows low-privileged authenticated users to modify any account via the /kal-api/auth/user/edit endpoint. Attackers holding only read permission can set their admin flag and 'all' permission or reset an administrator's password to fully take over the instance.
CVE-2026-129546 2026-11-16 6.5 Medium
Kalmia through 0.2.0 contains an information disclosure vulnerability that allows authenticated read-only users to retrieve Git deployment credentials via documentation API responses. Attackers can query GET /kal-api/docs/documentations or POST /kal-api/docs/documentation to obtain plaintext gitUser and gitPassword values and authenticate to external Git repositories.
CVE-2026-129547 2026-11-16 7.5 High
Kalmia through 0.2.0 contains an authentication bypass vulnerability in RsPressMiddleware that allows unauthenticated attackers to access private documentation by supplying any non-empty viewToken cookie. Attackers can send requests with a forged viewToken cookie, which is never validated as a JWT, to read all pages and assets of RequireAuth documentation sites.
CVE-2026-129548 2026-11-16 5.4 Medium
Kalmia through 0.2.0 contains a stored cross-site scripting vulnerability that allows read-only authenticated users to upload HTML or SVG files via the upload-file endpoint without type restrictions. Attackers can share links to files served unauthenticated through the file get route, executing JavaScript in the admin origin to steal administrator JWTs from localStorage.
CVE-2026-129549 2026-11-16 6.1 Medium
Tensei through 0.11.5 contains an unrestricted file upload vulnerability in the @tensei/media plugin that allows unauthenticated attackers to upload dangerous file types via the files/upload route. Attackers can set the multipart Content-Type to upload HTML or SVG files served from the application origin, causing stored cross-site scripting and storage consumption.
CVE-2026-129550 2026-11-16 9.1 Critical
Tensei through 0.11.5 contains a privilege escalation vulnerability in @tensei/auth that allows unauthenticated or authenticated users to assign themselves arbitrary roles via the exposed User Roles field. Attackers can supply a roles array during registration, a POST to the users route, or a PATCH to their own record to gain administrator permissions.
CVE-2026-129551 2026-11-16 6.5 Medium
Tensei through 0.11.5 contains a prototype pollution vulnerability in parseSortFromStringToObject of @tensei/rest that allows unauthenticated attackers to set Object.prototype properties via the sort parameter. Attackers can send a sort value like __proto__.<name>:<value> to list, fetch-one, update or delete routes before authorization, altering application logic and causing denial of service.
CVE-2026-129552 2026-11-16 9.8 Critical
Tensei through 0.11.5 contains an authentication bypass vulnerability in @tensei/auth that falls back to the hard-coded JWT signing key 'auth-secret-key' when JWT_SECRET is unset. Unauthenticated attackers can sign tokens with arbitrary user ids accepted by populateContextFromToken to impersonate any user, including administrators.
CVE-2026-129553 2026-11-16 6.1 Medium
Tensei through 0.11.5 contains an open redirect vulnerability in the @tensei/social-auth SocialAuthCallbackController that allows unauthenticated attackers to redirect users by supplying an unvalidated clientCallback query parameter. Attackers can craft links to the /:provider/callback route that send victims to attacker-controlled sites for phishing and leak the issued temporary access token appended after login.