| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ComfyUI-Easy-Use version 1.3.6 contains a path traversal vulnerability in the `save_preview()` handler for POST `/easyuse/save/{name}`. The handler checks the source directory before appending a user-supplied filename and allows the request to select the `custom_nodes` directory as a copy destination. An unauthenticated attacker who can reach the ComfyUI server can overwrite an installed custom node’s Python entry point with an uploaded file. When ComfyUI restarts and loads the modified node, the attacker’s code runs with the privileges of the ComfyUI process. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Bold Themes Bold Page Builder bold-page-builder allows Stored XSS.This issue affects Bold Page Builder: from n/a through 5.9.11. |
| A flaw was found in SSSD's PAM responder. A local attacker can send an authentication request without first negotiating the client protocol version. The responder dereferences a NULL protocol-version pointer and crashes, disrupting SSSD-backed authentication. Repeated crafted requests can sustain the denial of service. |
| In FRRouting 8.4 and later, bgpd frees the same memory twice when dynamic BGP neighbors disconnect, if the peer-group used by a "bgp listen range" also has a Site-of-Origin configured ("neighbor PG soo"). Each dynamic neighbor shares the peer-group's SoO value instead of getting its own copy, but frees it as its own when the neighbor is deleted, which happens as soon as its connection closes. The first disconnect leaves the peer-group pointing at freed memory, and the second disconnect frees it again, causing bgpd to abort and drop all BGP sessions on the router. Any host whose address falls inside the listen range can trigger this by opening and closing two TCP connections to the BGP port, without sending any BGP message and without knowing the AS number, and can repeat it each time bgpd restarts. If the peer-group has a TCP-MD5 password, only hosts that know the password can trigger it. Two ordinary flaps of legitimate dynamic neighbors have the same effect. Between the two frees, displaying the configuration ("show running-config") or establishing a dynamic neighbor also reads the freed memory, which can crash bgpd after a single disconnect. Only configurations that combine a listen range with a SoO on the same peer-group are affected. |
| The request-callout plugin in Kong Gateway Enterprise and Kong AI Gateway omits callout headers not sent by the client from its cache key, allowing a cached callout response for a caller to be served to another. |
| Winter CMS is a content management system built on the Laravel PHP framework. From 1.0.420 until 1.2.14, the backend Table widget partial modules/backend/widgets/table/partials/_table.php emits the search query parameter without HTML encoding inside a script template. A script-closing sequence in a crafted top-level GET URL terminates the raw-text template and causes the remaining input to be parsed as backend markup, even when the widget uses searching: false. Any Table or DataTable page is a sink, including the core Editor Settings route /backend/system/settings/update/winter/backend/editor, and an unauthenticated attacker can induce an authorized backend user to follow the link. Script executing in the victim's backend origin can read the CSRF token and issue credentialed requests with that user's permissions. For the core sink, a victim with backend.manage_editor, normally a Developer-role user or superuser, can edit CMS templates, so the injected script can conditionally chain to server-side code execution; this does not grant permissions the victim lacks and does not apply automatically to every third-party plugin sink. This issue is fixed in version 1.2.14. |
| Winter CMS is a content management system built on the Laravel PHP framework. From 1.2.13 until 1.2.14, the Backend\Controllers\MyAccount controller inherits the FormController actions create, update, and preview while declaring an empty $requiredPermissions array, and formFindModelObject() resolves a caller-supplied record identifier through an unscoped Backend\Models\User query. Any authenticated backend user can request another sequential user identifier through /backend/backend/myaccount/preview/{other_user_id} or the inherited update action and read profile data including name, login, email, avatar, role, group membership, superuser status, and throttle state. Password material is not exposed, and existing model authorization guards block cross-user writes. This issue is fixed in version 1.2.14. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.5, on JRuby, applications that parse untrusted XML with DTDLOAD, DTDVALID, or NOENT can have the NONET restriction bypassed when an external DTD or entity uses a short-form IPv4 host or uses absolute paths resolved against a network URL. The resolver can treat these identifiers as local and send a network request, potentially enabling server-side request forgery. CRuby and default parse options are not affected. This issue is fixed in version 1.19.5. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. From 1.12.0 until 1.19.5, the C extension on CRuby and TruffleRuby has a Nokogiri::HTML5 serializer that does not escape text inside noscript elements or angle brackets inside attribute values. When an application sanitizes untrusted HTML with the default parsing options, allows noscript, and sends serialized output to a scripting-enabled browser, the browser can parse markup that Nokogiri did not produce, enabling mutation cross-site scripting. Using parse_noscript_content_as_text: true is the recommended workaround, not the vulnerable default. JRuby is not affected because it does not implement Nokogiri::HTML5. This issue is fixed in version 1.19.5. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.5, the CRuby native extension can leave Ruby wrappers pointing to freed memory when Nokogiri::XML::Node#[]= or Nokogiri::XML::Node#lang= replaces an existing attribute value after code has accessed the attribute's child nodes. Replacing the value frees native child nodes while their wrappers remain reachable, and later use of those wrappers can cause an invalid read or process segfault. JRuby is not affected. This issue is fixed in version 1.19.5. |
| OpenObserve is a cloud-native observability platform. Prior to 1.1.0, the shared authentication validator in src/api/common/src/auth/validator.rs accepts an empty or whitespace-only HTTP Basic password for an account whose password_ext value is missing or empty. SSO-provisioned and migration-created users can have this state, allowing an unauthenticated attacker who knows an affected user's email address and organization to authenticate on protected non-ingestion API routes with the victim's role and permissions. A compromised privileged account can expose or modify telemetry, alerts, streams, users, and security configuration. An account with search permission can submit a DataFusion COPY ... TO statement through the search API to create or overwrite attacker-controlled files at service-process-writable locations, creating a conditional escalation to pre-authentication remote code execution. This issue is fixed in version 1.1.0. |
| fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. Prior to 5.12.0, when the non-default stopNodes option is enabled, readStopNodeData() in OrderedObjParser.js calls readTagExp() for each less-than character in an unterminated stop-node body and repeatedly rescans the remaining input while looking for a closing greater-than character. An attacker who supplies XML containing many tag fragments without a later closing character can cause quadratic rescanning before parsing fails, blocking a Node.js event loop and causing CPU-exhaustion denial of service. This issue is fixed in version 5.12.0. |
| Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Action Pack is a framework for handling and responding to web requests. Prior to 8.1.4.1 and 8.0.5.2, Action Pack session stores other than ActionDispatch::Session::CookieStore (CacheStore, MemCacheStore, and third-party stores built on AbstractStore, AbstractSecureStore or the session mixins) write the session cookie without a SameSite attribute, regardless of config.action_dispatch.cookies_same_site_protection, which defaults to :lax. Only CookieStore applies the configured policy. In browsers that do not treat a cookie without the attribute as SameSite=Lax, a cross-site request could carry the session cookie, possibly leading to cross-site request forgery against actions that do not verify an authenticity token, such as those of API-only applications. Applications are affected when they use a session store other than CookieStore and do not pass same_site: to config.session_store. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| Action View is a framework for handling view template lookup and rendering and provides view helpers for building HTML. Prior to 8.1.4.1 and 8.0.5.2, the fix for CVE-2026-33168 skips blank HTML attribute names in Action View tag helpers, but it tests the name before converting it to a string. A Symbol name made only of whitespace, such as :" ", is not blank, because Symbol#blank? is Symbol#empty?, so it reaches the attribute escaping, which emits an attribute with no name and produces malformed HTML. The asset tag helpers, such as image_tag, video_tag and audio_tag, symbolize their options, so a whitespace String name passed to them takes the same path. A carefully crafted attribute value could then be misinterpreted by the browser as a separate attribute name, possibly leading to XSS. Applications that allow users to specify custom HTML attribute names are affected. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| Active Storage makes it simple to upload and reference files in cloud services and attach those files to Active Record objects. From 8.0 until 8.0.5.2 and 8.1.4.1, when Active Storage serves a file through its proxy controllers, ActiveStorage::Streaming#send_blob_stream handles an error from the storage service by calling head to send a 404 or 500 response. If the error occurs after the first chunk has been written, the response is already committed, and head replaces the response body while the server is still reading the original ActionController::Live buffer. That buffer is never closed, so the server thread handling the request blocks until the process restarts. Repeated failed downloads could exhaust the server's threads, possibly resulting in a DoS vulnerability. Applications are affected when they store files on a service that streams a download in several requests, such as Amazon S3, an S3-compatible service or Google Cloud Storage, and draw Active Storage's default routes. The proxy routes are drawn whether or not proxy mode is the default for the application. A file deleted while it is being served, or any other storage error partway through a download, triggers the condition. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| Media Encoder is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. Exploit depends on conditions beyond the attacker's control. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is changed. |
| Action Pack is a framework for handling and responding to web requests. Prior to 8.1.4.1 and 8.0.5.2, ActionController::Live::Buffer#close pushes its end-of-stream marker onto the response's bounded queue while it holds the buffer's monitor. When the client has stopped reading and the queue is full, the push blocks, and Buffer#abort, which runs when the client disconnects or a write times out, waits indefinitely for the same monitor. Each such response could permanently hold a web server thread and its ActionController::Live thread, possibly resulting in a DoS vulnerability through thread exhaustion. Applications that stream responses with ActionController::Live, including send_stream, are affected. Applications that serve large files through Active Storage proxy mode are exposed to unauthenticated clients. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| Action Pack is a framework for handling and responding to web requests. Prior to 8.1.4.1 and 8.0.5.2, Action Pack negotiates the format of a rendered response from the Accept, X-Requested-With and, for XHR requests without Accept, Content-Type request headers, but ActionController::Rendering#_set_vary_header adds Vary: Accept only when the request carries a usable Accept header and the response has no Vary header yet. A response to a request without Accept, or to an XHR request, therefore omits the headers that selected its representation, and a response whose Vary the application set before rendering (for example Vary: Accept-Language) never gains Accept. A shared cache that honours Vary could store such a response and serve it to later clients that request a different representation, possibly leading to cache poisoning in which visitors receive, until the entry expires, a page without its layout or HTML in place of JSON. The attacker cannot choose the content of the response. Applications that render negotiated responses from actions marked public (for example with expires_in ..., public: true) behind a shared cache that honours Vary, such as Thruster or Rack::Cache, are affected. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| Active Storage makes it simple to upload and reference files in cloud services and attach those files to Active Record objects. Prior to 8.1.4.1 and 8.0.5.2, ActiveStorage::Filename#base and #extension_with_delimiter, and therefore #extension, pass the stored filename unmodified to File.basename and File.extname, which raise ArgumentError when the name contains a NUL byte. Active Storage stores the client-supplied filename verbatim, so a user who is permitted to upload an attachment could persist such a filename on databases that accept NUL bytes in string columns, such as SQLite and MySQL/MariaDB. Each subsequent request that builds a variant or preview of the blob, opens it, or renders it as an Action Text attachment then raises, possibly resulting in a persistent DoS vulnerability for the pages that display the blob until it is purged or its filename is corrected. Applications that use PostgreSQL are not affected, because PostgreSQL rejects the row. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
