| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Remote Access SSL VPN functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust device memory resulting in a denial of service (DoS) condition to new Remote Access SSL VPN connections. This does not affect the management interface, though it may become temporarily unresponsive.
This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device web interface to stop responding, resulting in a DoS condition. |
| A vulnerability in the Remote Access SSL VPN functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker with a valid VPN connection to exhaust device memory resulting in a denial of service (DoS) condition.This does not affect the management or MUS interfaces.
This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key.
This vulnerability is due to heap corruption in OSPF when parsing packets. An attacker could exploit this vulnerability by sending crafted packets to the OSPF service. A successful exploit could allow the attacker to corrupt the heap, causing the affected device to reload, resulting in a DoS condition. |
| A vulnerability in of Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition.
This vulnerability is due to improper validation of user-supplied input. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the Remote Access SSL VPN, HTTP management and MUS functionality, of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust device memory resulting in a denial of service (DoS) condition requiring a manual reboot.
This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition. |
| Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an attacker to execute a cross-site scripting (XSS) attack or an open redirect attack. For more information about these vulnerabilities, see the Details section of this advisory. |
| Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an attacker to execute a cross-site scripting (XSS) attack or an open redirect attack. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) protocol inspection engine of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the configured file policies on an affected system. The vulnerability is due to errors when handling specific SSL/TLS messages. An attacker could exploit this vulnerability by sending crafted HTTP packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured file policies and deliver a malicious payload to the protected network. |
| A vulnerability in the protocol detection component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper detection of the initial use of a protocol on a nonstandard port. An attacker could exploit this vulnerability by sending traffic on a nonstandard port for the protocol in use through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems that would otherwise be blocked. Once the initial protocol flow on the nonstandard port is detected, future flows on the nonstandard port will be successfully detected and handled as configured by the applied policy. |
| A vulnerability in the normalization functionality of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to insufficient normalization of a text-based payload. An attacker could exploit this vulnerability by sending traffic that contains specifically obfuscated payloads through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious payloads to protected systems that would otherwise be blocked. |
| A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device. |
| A vulnerability in the Secure Sockets Layer (SSL) Virtual Private Network (VPN) Client Certificate Authentication feature for Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to establish an SSL VPN connection and bypass certain SSL certificate verification steps. The vulnerability is due to incorrect verification of the SSL Client Certificate. An attacker could exploit this vulnerability by connecting to the ASA VPN without a proper private key and certificate pair. A successful exploit could allow the attacker to establish an SSL VPN connection to the ASA when the connection should have been rejected. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvg40155. |
| A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718. |
| A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446. |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured file action policy that is intended to drop the Server Message Block Version 2 (SMB2) and SMB Version 3 (SMB3) protocols if malware is detected. The vulnerability is due to incorrect detection of an SMB2 or SMB3 file based on the total file length. An attacker could exploit this vulnerability by sending a crafted SMB2 or SMB3 transfer request through the targeted device. An exploit could allow the attacker to pass SMB2 or SMB3 files that could be malware even though the device is configured to block them. This vulnerability does not exist for SMB Version 1 (SMB1) files. This vulnerability affects Cisco Firepower System Software when one or more file action policies are configured, on software releases prior to 6.2.3. Cisco Bug IDs: CSCvg68807. |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured file action policy to drop the Server Message Block (SMB) protocol if a malware file is detected. The vulnerability is due to how the SMB protocol handles a case in which a large file transfer fails. This case occurs when some pieces of the file are successfully transferred to the remote endpoint, but ultimately the file transfer fails and is reset. An attacker could exploit this vulnerability by sending a crafted SMB file transfer request through the targeted device. An exploit could allow the attacker to pass an SMB file that contains malware, which the device is configured to block. This vulnerability affects Cisco Firepower System Software when one or more file action policies are configured, on software releases prior to 6.2.3. Cisco Bug IDs: CSCvc20141. |
| A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029. |
| A vulnerability in the application policy configuration of the Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data. |
| A vulnerability in the FTP inspection engine of Cisco Adaptive Security (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of FTP data. An attacker could exploit this vulnerability by sending malicious FTP traffic through an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device. |
| Multiple vulnerabilities in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their FTD instance and execute commands with root privileges in the host namespace. These vulnerabilities are due to insufficient protections on the underlying filesystem. An attacker could exploit these vulnerabilities by modifying critical files on the underlying filesystem. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running FTD instances. |
