| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure cmd stream ends with a stop op
While the QSIZE register setting should prevent an out of bounds access
of the command stream, it is not clear whether the h/w generates an
interrupt in this case as is required (to prevent a timeout). As a stop op
is expected end of the command stream, let's just ensure it is present. A
stop op in the middle of the command stream also makes no sense. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_input: stop callbacks before unregistering input device
virtinput_remove() unregisters the input device before resetting the
virtio device. virtinput_recv_events() drops vi->lock around input_event(),
so clearing vi->ready does not stop a callback that passed the entry check.
It can still use vi->idev, requeue buffers and kick the queue.
Reset first, as virtinput_freeze() already does. With the preceding core
change, reset waits for callbacks before input_unregister_device() can
free vi->idev. Recheck vi->ready after taking the lock again: keep draining
completed events so an input packet is not truncated, but stop requeueing
buffers and kicking the queue.
With evdev attached, input_unregister_handle() currently waits for an RCU
grace period, which also waits out IRQ callbacks. This masks the lifetime
bug on PCI and MMIO, but does not protect sleepable callbacks on other
transports. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file->triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) < 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Allow list_del during perf_event_overflow()
A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec()
interface to get the PMU call back function pmu::sched_task
invoked at schedule in and schedule out. This is achieved
by walking along the list anchored by sched_cb_list.
The following scenario might lead to a list corruption.
perf_pmu_sched_task()
for_each_list_entry(..., &sched_cb_list)
+--> __perf_pmu_sched_task()
+--> event->pmu->sched_task())
+--> PMU_push_sample()
+--> perf_event_overflow()
+--> __perf_event_overflow()
+--> pmu->stop()
+--> perf_sched_cb_dec()
remove entry from sched_cb_list
while list node in use.
This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been
invoked and perf_event::event_limit hits zero.
Prevent the list corruption and convert for_each_list_entry()
to for_each_list_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: platform: Use acpi_bus_get_primary_device()
The acpi_get_first_physical_node() usage in acpi_platform_fill_resource()
and acpi_create_platform_device() is generally unsafe because in theory
the device returned by it may be freed at any time [1].
It is also inefficient because acpi_get_first_physical_node() is called
multiple times for the same argument which can be avoided.
Address these issues by using acpi_bus_get_primary_device() instead of
acpi_get_first_physical_node() and adjusting the code to call it just
once at the beginning of and acpi_create_platform_device() and drop
the device reference acquired by it upon the return from that function. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_refcount field as unique
BPF_REFCOUNT is not marked as a unique field, while it should be. Fix
this oversight. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Recover HW before retire hung submit
During recovery, it is not safe to retire the hung submit before we
recover the GPU. Retiring the submit triggers BO free and that can
result in GPU pagefaults since the GPU may be actively accessing those
BOs.
To fix this, retire the submits after gpu recovery is complete in
recover_worker().
Patchwork: https://patchwork.freedesktop.org/patch/730655/ |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: fork: Initialize function graph state before copy_exec_state()
dup_task_struct() copies the parent's task_struct, including ret_stack.
ftrace_graph_init_task() clears the copied function graph state, but it
currently runs after copy_exec_state().
For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state.
If that allocation fails, copy_process() reaches bad_fork_free and
free_task() calls ftrace_graph_exit_task(). Since the child still carries
the parent's ret_stack pointer, the unwind frees the parent's active
function graph return stack. The parent subsequently accesses freed memory
from function_graph_enter_regs().
KASAN reports:
[ 22.190920] ==================================================================
[ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90
[ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1
[ 22.205134]
[ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy)
[ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 22.213750] Call Trace:
[ 22.215271] <TASK>
[ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.217774] dump_stack_lvl+0x4e/0x70
[ 22.220531] print_report+0x157/0x4b4
[ 22.223202] ? fixup_red_left+0x9/0x30
[ 22.224407] ? complete_report_info+0x83/0x110
[ 22.226679] ? function_graph_enter_regs+0xa76/0xb90
[ 22.228084] kasan_report+0xce/0x100
[ 22.230109] ? function_graph_enter_regs+0xa76/0xb90
[ 22.232860] ? stack_trace_save+0x4/0xd0
[ 22.234156] function_graph_enter_regs+0xa76/0xb90
[ 22.236090] ? kasan_save_stack+0x30/0x50
[ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10
[ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80
[ 22.239628] ? stack_trace_save+0x4/0xd0
[ 22.242121] ? stack_trace_save+0x4/0xd0
[ 22.243588] ftrace_graph_func+0xda/0x160
[ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.246520] 0xffffffffa0000095
[ 22.250528] ? stack_trace_save+0x9/0xd0
[ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0
[ 22.253152] stack_trace_save+0x9/0xd0
[ 22.254264] kasan_save_stack+0x30/0x50
[ 22.273631] kasan_save_track+0x14/0x30
[ 22.276763] kasan_save_free_info+0x3b/0x70
[ 22.278296] __kasan_slab_free+0x43/0x70
[ 22.280157] kmem_cache_free+0xbf/0x3b0
[ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.284001] free_task+0xa2/0x160
[ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.286752] copy_process+0x2aae/0x7bc0
Initialize the child function graph state immediately after
dup_task_struct(), before the first fallible operation. |
| In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl through user and PID namespaces because cad_pid was registered in
pid_table[]. Moving cad_pid back to the global reboot sysctl table
corrected that namespace and permission mismatch, but did not fix the
underlying lifetime race.
Fix this by treating cad_pid as an RCU-protected pointer at both read
sites and by waiting for a grace period before dropping the old reference
on the write side.
call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid()
also queues pid->rcu; queueing the same rcu_head twice can corrupt the
RCU callback list.
Original KASAN crash stack:
kernel/pid.c:545 pid_nr_ns() # reads freed pid->level
kernel/pid.c:556 pid_vnr() # calls pid_nr_ns()
kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there. |
| A flaw was found in librsvg. When processing an SVG document containing nested XML inclusions (Xincludes) with duplicate entity declarations, a use-after-free error can occur. This vulnerability arises because the library incorrectly frees an XML entity that is still in use by the parser. An attacker could potentially exploit this to cause a denial of service or execute arbitrary code. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free race in sample_restore_put()
Concurrent teardown of TC sample rules sharing the same restore
context may re-read restore->count after dropping restore_lock.
At that point another thread may already have completed cleanup and
freed the restore object.
Use the result of the refcount decrement while holding restore_lock to
determine whether cleanup is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch, prevent mc_list repopulation during vport disable
In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead
of esw_vport_change_handle_locked() so vport->allmulti_rule is
NULL before the change handler observes it.
During FW-fatal recovery the disable runs while dev->state ==
INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode()
fails and returns early, leaving vport->allmulti_rule intact, so
esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries
to vport->mc_list whose flow rules are then installed in the FDB
by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the
FDB with those refs still held, corrupting the sub-tree and
leaving dangling flow_rule pointers in vport->mc_list.
Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`:
refcount_t: underflow; use-after-free.
tree_put_node+0xef/0x110 [mlx5_core]
clean_tree+0x44/0xd0 [mlx5_core] (x5)
mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core]
mlx5_unload+0x65/0xd0 [mlx5_core]
... mlx5_health_try_recover
BUG: unable to handle page fault for address: 0000000003000055
down_write+0x1c/0x60
mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core]
esw_del_mc_addr+0x7b/0x170 [mlx5_core]
esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core]
esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core]
mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core]
... mlx5_load ... mlx5_health_try_recover
esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule
via its local state machine even when the FW del fails. With the
rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change
handler closes, no rules are installed during disable, and the
reload starts with a clean mc_list. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields when recycling rhtab elements
rhtab_map_update_existing() and rhtab_delete_elem() call
bpf_obj_free_fields() when replacing or deleting a value. These map
operations can run from BPF programs in NMI context, where releasing a
referenced kptr or another complex field is not generally safe.
Array and hash maps avoid that problem by cancelling only the asynchronous
fields which can be stopped safely in the caller context. Other ownership
state remains attached to the allocation until its memory allocator
destructor performs the final cleanup.
Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This
cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to
release referenced kptrs when the allocation is eventually destroyed.
[ kkd: Rebased, used direct helper calls, and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check ancestor frames for rbtree callbacks
bpf_rbtree_add() invokes its comparator while the caller holds the root
lock. The native insertion code retains raw parent and link pointers across
the callback, so the verifier prohibits unlocking, consuming tree nodes,
or changing RCU state from that callback.
in_rbtree_lock_required_cb() only checks the innermost verifier frame.
Static subprogram calls are permitted while holding a spin lock, and such a
call pushes a frame without in_callback_fn set. Consequently, all callback
restrictions disappear in the nested frame. The subprogram can unlock the
tree, remove and drop the node being compared, then relock. Native insertion
resumes with the stale parent pointer and links freed memory into the tree.
Walk all active frames for the rbtree callback instead. Benign static
subprograms remain permitted, while callback restrictions follow execution
into nested frames. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: detach failed sprout device from transaction update list
When creating the first metadata chunk for a sprout filesystem,
create_chunk() adds the new device to the transaction dev_update_list
through device->post_commit_list.
If the subsequent system chunk creation fails, btrfs_init_new_device()
aborts the transaction and releases the device while post_commit_list is
still linked. This triggers a warning in btrfs_free_device() and leaves
the transaction list referencing freed memory.
Detach the device while holding chunk_mutex before releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use rcu_assign_pointer() for __rcu list updates
Several places in net/ipv6/mcast.c update RCU-protected lists
(np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer
assignments instead of rcu_assign_pointer():
1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did:
*map = ma->next;
without rcu_assign_pointer() while concurrent readers traverse
idev->mc_list locklessly under rcu_read_lock().
2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group
from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and
np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing
with lockless readers in inet6_mc_check().
3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to
np->ipv6_mc_list via raw assignment before publishing mc_lst.
4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers
passed into rcu_assign_pointer() lacked explicit dereference helpers.
Fix these by consistently using rcu_assign_pointer() along with
mc_dereference() / sock_dereference(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: folio_put() after error
dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of
kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator
corruption.
While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF
by future callers. |
