| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE -
which is a valid index - so add a check for this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate sequence number of TX release report
Hardware rarely reports abnormal sequence number in TX release report,
which will access out-of-bounds of wd_ring->pages array, causing NULL
pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U
6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1)
Call Trace:
<IRQ>
rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)]
rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)]
net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759
handle_softirqs+0xbe/0x290 kernel/softirq.c:601
? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)]
__local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423
</IRQ>
<TASK>
rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)]
? irq_thread+0xa7/0x340 kernel/irq/manage.c:0
irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314
? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202
? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220
kthread+0xea/0x110 kernel/kthread.c:376
? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287
? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
To prevent crash, validate rpp_info.seq before using. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate doorbell_offset in user queue creation
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
(cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec) |
| In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS,
This patch protects against invalid index out of bounds access to mw_sizes
When invalid access print message to user that configuration is not valid. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mchp-ipc-sbi: fix out-of-bounds access in mchp_ipc_get_cluster_aggr_irq()
The cluster_cfg array is dynamically allocated to hold per-CPU
configuration structures, with its size based on the number of online
CPUs. Previously, this array was indexed using hartid, which may be
non-contiguous or exceed the bounds of the array, leading to
out-of-bounds access.
Switch to using cpuid as the index, as it is guaranteed to be within
the valid range provided by for_each_online_cpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise
When user provides a bogus pat_index value through the madvise IOCTL, the
xe_pat_index_get_coh_mode() function performs an array access without
validating bounds. This allows a malicious user to trigger an out-of-bounds
kernel read from the xe->pat.table array.
The vulnerability exists because the validation in madvise_args_are_sane()
directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without
first checking if pat_index is within [0, xe->pat.n_entries).
Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug
builds, it still performs the unsafe array access in production kernels.
v2(Matthew Auld)
- Using array_index_nospec() to mitigate spectre attacks when the value
is used
v3(Matthew Auld)
- Put the declarations at the start of the block
(cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
A malicious or compromised VIO server can return a num_written value in the
discover targets MAD response that exceeds max_targets. This value is
stored directly in vhost->num_targets without validation, and is then used
as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which
is only allocated for max_targets entries. Indices at or beyond max_targets
access kernel memory outside the DMA-coherent allocation. The
out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI
MADs that are sent back to the VIO server, leaking kernel memory.
Fix by clamping num_written to max_targets before storing it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: validate connector number in ucsi_notify_common()
The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a
7-bit field (0-127) that is used to index into the connector array in
ucsi_connector_change(). However, the array is only allocated for the
number of connectors reported by the device (typically 2-4 entries).
A malicious or malfunctioning device could report an out-of-range
connector number in the CCI, causing an out-of-bounds array access in
ucsi_connector_change().
Add a bounds check in ucsi_notify_common(), the central point where CCI
is parsed after arriving from hardware, so that bogus connector numbers
are rejected before they propagate further. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Fix missing SPDIFI1 index handling
SPDIF1 DAIO type isn't properly handled in daio_device_index() for
hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds
array access. Follow the hw20k1 pattern and return the proper index
for this type, too. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
module: Fix kernel panic when a symbol st_shndx is out of bounds
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
s390/syscalls: Add spectre boundary for syscall dispatch table
The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
__io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte
SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second
half of the SQE would be past the end of the sq_sqes array. The current
check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented
when a 128-byte SQE is encountered, not on every iteration. The actual
array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask
(the last slot) while the wrap check passes.
Fix by checking sq_idx directly. Keep the sq_head increment so the loop
still skips the second half of the 128-byte SQE on the next iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix missing bounds check on DEFAULT table in verify_dfa()
The verify_dfa() function only checks DEFAULT_TABLE bounds when the state
is not differentially encoded.
When the verification loop traverses the differential encoding chain,
it reads k = DEFAULT_TABLE[j] and uses k as an array index without
validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count,
therefore, causes both out-of-bounds reads and writes.
[ 57.179855] ==================================================================
[ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660
[ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993
[ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 57.181563] Call Trace:
[ 57.181572] <TASK>
[ 57.181577] dump_stack_lvl+0x5e/0x80
[ 57.181596] print_report+0xc8/0x270
[ 57.181605] ? verify_dfa+0x59a/0x660
[ 57.181608] kasan_report+0x118/0x150
[ 57.181620] ? verify_dfa+0x59a/0x660
[ 57.181623] verify_dfa+0x59a/0x660
[ 57.181627] aa_dfa_unpack+0x1610/0x1740
[ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470
[ 57.181640] unpack_pdb+0x86d/0x46b0
[ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181656] ? aa_unpack_nameX+0x1a8/0x300
[ 57.181659] aa_unpack+0x20b0/0x4c30
[ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181664] ? stack_depot_save_flags+0x33/0x700
[ 57.181681] ? kasan_save_track+0x4f/0x80
[ 57.181683] ? kasan_save_track+0x3e/0x80
[ 57.181686] ? __kasan_kmalloc+0x93/0xb0
[ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130
[ 57.181697] ? policy_update+0x154/0x330
[ 57.181704] aa_replace_profiles+0x15a/0x1dd0
[ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181712] ? aa_loaddata_alloc+0x77/0x140
[ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181717] ? _copy_from_user+0x2a/0x70
[ 57.181730] policy_update+0x17a/0x330
[ 57.181733] profile_replace+0x153/0x1a0
[ 57.181735] ? rw_verify_area+0x93/0x2d0
[ 57.181740] vfs_write+0x235/0xab0
[ 57.181745] ksys_write+0xb0/0x170
[ 57.181748] do_syscall_64+0x8e/0x660
[ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 57.181765] RIP: 0033:0x7f6192792eb2
Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE
entries unconditionally. |
| An out-of-bounds read in the read_global_param() function (libavcodec/av1dec.c) of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A possible security vulnerability has been identified in Apache Kafka.
By default, the broker property `sasl.oauthbearer.jwt.validator.class` is set to `org.apache.kafka.common.security.oauthbearer.DefaultJwtValidator`. It accepts any JWT token without validating its signature, issuer, or audience. An attacker can generate a JWT token from any issuer with the `preferred_username` set to any user, and the broker will accept it.
We advise the Kafka users using kafka v4.1.0 or v4.1.1 to set the config `sasl.oauthbearer.jwt.validator.class` to `org.apache.kafka.common.security.oauthbearer.BrokerJwtValidator` explicitly to avoid this vulnerability. Since Kafka v4.1.2 and v4.2.0 and later, the issue is fixed and will correctly validate the JWT token. |
