| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate sockaddr length per family in listener_set
nfsd_sock_nl_policy declares NFSD_A_SOCK_ADDR as a bare NLA_BINARY
attribute with no minimum length. A CAP_NET_ADMIN caller can send a
16-byte NFSD_A_SOCK_ADDR with sa_family=AF_INET6, causing a 12-byte
OOB read across three consumers (rpc_cmp_addr_port, svc_find_listener,
kernel_bind).
nfsd_nl_listener_set_doit() also parsed and validated each listener
entry inline in two separate loops, interleaved with mutating the
running listener configuration. The validation was duplicated, used an
open-coded "nla_len < sizeof(struct sockaddr)" check that was too short
for AF_INET6, and handled a malformed entry inconsistently depending on
which loop noticed it.
Add an nfsd_nl_validate_listeners() helper that walks the entire list
once and confirms each entry parses, carries both an address and a
transport name, and is long enough for its address family
(sizeof(struct sockaddr_in) for AF_INET, sizeof(struct sockaddr_in6)
for AF_INET6, -EAFNOSUPPORT otherwise). Call it before taking
nfsd_mutex or creating the serv, so a malformed request fails cleanly
with no side effects.
Since every entry is known valid by the time the two existing loops
run, drop the redundant presence and per-family length checks from
both, leaving only the nla_parse_nested() call needed to extract the
data. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations
nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked
delegations but does not set SC_STATUS_FREED before releasing cl_lock.
revoke_delegation() uses this flag to detect whether FREE_STATEID has
already processed the delegation -- without it, the freed delegation is
added to cl_revoked via list_add(), producing a use-after-free when
cl_revoked is later traversed in __destroy_client().
The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already
sets SC_STATUS_FREED correctly. Apply the same pattern to the
SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid(). |
| In the Linux kernel, the following vulnerability has been resolved:
zram: validate deflate params
We must validate user-supplied deflate winbits before we pass it to
zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is
outside of valid ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID
vgic_v2_deactivate() passes the INTID a guest wrote to GICV_DIR straight
to vgic_get_vcpu_irq(), and treats a failed lookup as a "can't happen"
condition with WARN_ON_ONCE().
The guest can make it happen at will, though: for any INTID outside of
the implemented SGI, PPI and SPI ranges the lookup returns NULL, since
GICv2 has no LPIs. A guest running with EOImode==1 writing such an INTID
to GICV_DIR triggers the WARN, and panics hosts running with
panic_on_warn.
Drop the WARN and ignore failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from
the RCRB MMIO block using a readl() loop bounded by sizeof(struct
aer_capability_regs). This struct is a software layout and its embedded
struct pcie_tlp_log is larger than the on-wire AER capability. As a
result the loop reads past the mapped AER register block.
The over-read also populates the software-only tail fields including
header_log.header_len. An out-of-range header_len passed to
pcie_print_tlp_log() can then loop past the header log buffer and cause
a second out-of-bounds read.
The read was correct when introduced, but struct pcie_tlp_log has since
grown (Header Log and TLP Prefix Log sizes, header_len and flit fields),
so sizeof(struct aer_capability_regs) no longer matches the physical AER
capability.
Bound the read to the physical AER registers, header through the 16 byte
Header Log. Zero the destination first so the software-only fields are
deterministic. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: remove default configfs groups on teardown
f_midi2_alloc_inst() creates default configfs child groups for the
default endpoint and default block using configfs_add_default_group(),
setting their internal refcount to 1.
However, during function teardown in f_midi2_free_inst() or EP cleanup
in f_midi2_ep_opts_release(), configfs_remove_default_groups() is
never called, therefore never dropping the refcount and leaking struct
f_midi2_ep_opts and f_midi2_block_opts.
Add the missing configfs_remove_default_groups() in the afformentioned
functions to free the structs properly. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash passing ERR_PTR to kthread_stop()
event_test_stuff() calls kthread_run() and unconditionally passes the
returned task_struct pointer to kthread_stop(). kthread_run() returns an
error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for
example under memory pressure during the boot-time event self-test.
kthread_stop() then dereferences the invalid pointer, crashing the kernel.
Check the result of kthread_run() before passing it to kthread_stop(). Use
WARN_ON() so that a failure to create the self-test thread does not go
unnoticed, matching the ring-buffer self-test fix in commit
91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: always drain cache_cleaner before destroying a cache_detail
sunrpc_destroy_cache_detail() only cancels the global cache_cleaner
delayed_work when cache_list is empty. During per-netns teardown
cache_list is never empty because init_net's caches remain registered,
so the cancel never fires. After unlink, the caller proceeds to
cache_destroy_net() which kfrees the cache_detail while cache_clean()
may still hold a dangling pointer to it. The result is a
use-after-free: cache_dequeue() takes cd->queue_lock on freed memory,
and cache_put() dereferences cd->cache_put as a function pointer from
freed slab.
Drop the list_empty guard so that cancel_delayed_work_sync() always
runs, ensuring any in-flight cache_clean() completes before the
cache_detail is freed. Re-arm the cleaner afterwards if other caches
are still registered. |
| In the Linux kernel, the following vulnerability has been resolved:
module: validate string table section types
In elf_validity_cache_sechdrs, section sizes and offsets are validated,
unless the section type is SHT_NULL or SHT_NOBITS.
Later, elf_validity_cache_secstrings and elf_validity_cache_index_str
access the section name table (.shstrtab) and symbol string table
(.strtab) headers without first ensuring that their types are
SHT_STRTAB. If a section type is SHT_NULL or SHT_NOBITS, sh_offset has
not been validated and may reference out-of-bounds memory when
dereferenced in elf_validity_cache_secstrings or
elf_validity_cache_strtab.
Validate that both string section headers are of type SHT_STRTAB before
caching them. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: report non-retryable errors separatedly
The error codes BLK_STS_NOTSUPP and BLK_STS_INVAL should not cause leg
failure on dm-raid1. This patch changes the interface to dm-io, so that
it reports two error bitmaps - error_bits and unsup_bits. The unsup_bit
bitmap tracks BLK_STS_NOTSUPP or BLK_STS_INVAL errors, the error_bits
bitmap tracks all the other errors.
dm-raid1 is changed so that it won't fail a leg if it receives an error
in the unsup_bits bitmap.
This patch (with 62dc37a819a5) fixes misbehavior if the user uses
unaligned bio vectors on dm-raid1. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame()
ni_read_frame() decompresses an LZNT $DATA frame into the vmapped target
pages and then trusts decompress_lznt()'s return value:
unc_size = decompress_lznt(frame_ondisk, ondisk_size, frame_mem,
frame_size);
if ((ssize_t)unc_size < 0) err = unc_size;
else if (!unc_size || unc_size > frame_size) err = -EINVAL;
decompress_lznt() stops as soon as the compressed stream is exhausted
(e.g. a zero chunk header) and returns the number of bytes it actually
wrote, which may be far less than frame_size. The bytes between unc_size
and frame_size are never written. The only memset() that follows zeroes
the region beyond i_valid; when the frame lies entirely within the file's
valid size that memset() does not run, so the gap retains whatever was in
the just-vmapped pages. All pages are then marked uptodate and returned
to userspace, disclosing uninitialized (recently-freed) kernel page
memory. A crafted compressed file whose stream decompresses to only a few
bytes leaks the remainder of every frame on a plain read(2), which is
enough to recover kernel pointers and defeat KASLR.
Zero the [unc_size, frame_size) tail immediately after a successful LZNT
decompress so the remainder reads back as zero. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: validate report size in mcp2221_raw_event()
mcp2221_raw_event() never validates the size of incoming HID reports.
In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3]
as the copy length without checking that 4 + data[3] bytes actually
exist in the received report. A malicious or misbehaving USB device can
send a short report with a large data[3], causing the memcpy to read
past the valid report data in the HID transfer buffer and leak
uninitialized kernel memory back to userspace through the I2C/SMBus
read path.
Add a minimum size check at entry and validate that the source range
fits within the received report before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size()
When the else branch of cifs_file_set_size() finds a writable file handle
via find_writable_file(), it borrows tcon and server from the handle's
tlink, attempts the handle-based set_file_size() RPC, and then releases
the handle with cifsFileInfo_put().
If set_file_size() fails, execution falls through to the path-based
fallback, which reuses the borrowed tcon and server under the
"if (tcon == NULL)" guard. Since tcon is not NULL at that point, the
guard is skipped. If cifsFileInfo_put() dropped the last reference on a
tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE
cleared, as happens during reconnection or session teardown),
cifs_put_tlink() will have freed tcon; the subsequent set_path_size()
call is then a use-after-free.
Setting tcon = NULL after cifsFileInfo_put() causes the existing guard
to take the cifs_sb_tlink() path, which acquires a fresh reference for
the path-based operation or fails cleanly if the session is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
MDSMap export_targets entries are monitor controlled. check_new_map()
uses each entry as a bit number in a fixed stack bitmap, so a rank
outside the protocol namespace can make set_bit() write past the end of
the array.
Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not
validate against possible_max_rank here because maps may legitimately
reference ranks beyond a temporarily reduced max_mds. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: gate nfs3 setacl by argp->mask
nfsd3_proc_setacl() calls set_posix_acl() unconditionally for both
ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT, passing argp->acl_access and
argp->acl_default verbatim. The NFSv3 ACL decoder only populates
those pointers when the corresponding mask bit is set:
nfs3svc_decode_setaclargs()
if (args->mask & NFS_ACL) decode into acl_access
if (args->mask & NFS_DFACL) decode into acl_default
/* otherwise the pointer stays NULL (pc_argzero) */
nfsd3_proc_setacl()
set_posix_acl(.., ACL_TYPE_ACCESS, argp->acl_access)
set_posix_acl(.., ACL_TYPE_DEFAULT, argp->acl_default)
set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this
ACL type" operation. A NULL pointer that means "the client did not
send this arm" is therefore indistinguishable from "the client
asked to remove this ACL". A SETACL with mask=NFS_ACL silently
drops the directory's default ACL; mask=0 drops both.
The sibling nfsd3_proc_getacl() already consults argp->mask before
touching each arm; mirror that in setacl.
Fix by wrapping each set_posix_acl() call in the matching mask bit
check and initializing error to 0 before inode_lock so that a
request with neither bit set leaves the on-disk ACLs untouched and
returns nfs_ok. The out_drop_lock path and the unconditional
posix_acl_release() at out: are preserved; both NULL-tolerate the
skipped arms. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: gate nfs2 setacl by argp->mask
The NFSACL v2 SETACL path shares the decoder convention used by its
v3 sibling: nfsaclsvc_decode_setaclargs() fills in argp->acl_access
only when NFS_ACL is set in the request mask and argp->acl_default
only when NFS_DFACL is set, leaving the other pointer NULL because
the argument buffer is zeroed up to pc_argzero before decode.
nfsacld_proc_setacl() then hands both pointers to set_posix_acl()
unconditionally. set_posix_acl(idmap, dentry, type, NULL) is the VFS
"remove this ACL type" operation, so an omitted arm is
indistinguishable from an explicit request to delete that ACL. A
SETACL carrying only NFS_ACL silently strips the directory's default
ACL; mask=0 strips both.
This is the same defect just fixed in nfsd3_proc_setacl(); apply the
same remedy. Gate each set_posix_acl() call on its mask bit and
initialize error to 0 so that a request with neither bit set leaves
the on-disk ACLs untouched and returns success. The out_drop_lock
path and the unconditional posix_acl_release() in
nfsaclsvc_release_setacl() already tolerate the skipped arms. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid empty mapping pairs
Reject an attribute with empty mapping pairs if it has inconsistent
highest VCN and size. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound page_lcns[] index by the log record
The copy_lcns loop and the redo shorten loop index page_lcns[] at j + i,
where i runs up to the log record's lcns_follow. That count is checked only
against the record's own length, not the target entry, so check_dp_table()
(which validates the entry's lcns_follow) does not cover it: the copy_lcns
entry may even be freshly allocated after that check, and find_dp() bounds j
but not i. A crafted record thus overflows page_lcns[] of an otherwise valid
entry.
Add dp_range_ok() and reject, before each loop, any record whose run does
not fit the entry. These are the only two page_lcns[] accesses indexed by
the record rather than the entry, so together with the entry validation
every access is now bounded.
[[email protected]: original patch contained changes to the problem already handled, applied partly] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: clear CALLBACK_RUNNING on failed delegation recall queue
nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit
at entry to serialize recall work, then calls nfsd4_run_cb() to queue
the recall. When the queue attempt fails the refcount bump is undone,
but the RUNNING bit is left set. The only site that clears the bit is
nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the
workqueue and is therefore unreachable when nothing was queued.
The bit becomes a permanent latch on dp->dl_recall.cb_flags: every
subsequent break_lease() on the same delegation hits the early-return
guard in nfsd_break_one_deleg() and silently skips the recall, so the
delegation is never broken and the conflicting open or lock stalls.
Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside
the refcount_dec. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix double end_creating() on the casefold-mismatch path
ovl_create_real() releases the new dentry twice when the casefold
consistency check fails. The S_IFDIR branch calls end_creating() and
sets err, then falls through to the common out: label which calls
end_creating() on the same dentry again:
case S_IFDIR:
newdentry = ovl_do_mkdir(ofs, dir, newdentry, attr->mode);
err = PTR_ERR_OR_ZERO(newdentry);
if (!err && ofs->casefold != ovl_dentry_casefolded(newdentry)) {
pr_warn_ratelimited(...);
end_creating(newdentry); /* first */
err = -EINVAL;
}
break;
...
if (err)
goto out;
...
out:
if (err) {
end_creating(newdentry); /* second, same dentry */
return ERR_PTR(err);
}
end_creating() is end_dirop(), which does inode_unlock() on the parent
and dput() on the dentry, so the parent directory's i_rwsem is unlocked
twice and the dentry is put twice. The second unlock releases a lock
that is not held, which is what wedges every later creation under that
parent, and the second dput() drops a reference that was never taken.
The branch was added by commit dfc7da402ccc ("ovl: Check for casefold
consistency when creating new dentries") as a bare dput(), which already
released the reference twice; commit fe497f0759e0 ("VFS: change
vfs_mkdir() to unlock on failure.") converted both sites to
end_creating(), adding the double unlock.
This is reachable by an unprivileged user. The casefold consistency of
the layers is validated at mount time in ovl_parse_layer(), and again on
every lookup in ovl_lookup_single(), but ofs->workdir is the internal
"work" subdirectory created inside the user-supplied workdir, and that
subdirectory is not re-checked. Marking it casefolded after the mount
therefore makes every ovl_create_temp() inherit the wrong state - and
that path reaches ovl_create_real() through ovl_start_creating_temp(),
which uses start_creating() with a generated name and so never runs the
lookup-time check.
unshare -Urm
mount -t tmpfs -o casefold=utf8-12.1.0 tmpfs mnt
mkdir -p mnt/lower/d mnt/upper mnt/work mnt/merged
mount -t overlay ovl -o lowerdir=mnt/lower,\
upperdir=mnt/upper,workdir=mnt/work mnt/merged
chattr +F mnt/work/work
mkdir mnt/merged/d/sub # directory copy-up
overlayfs: wrong inherited casefold (work/#5)
and the next copy-up blocks forever on the parent's i_rwsem:
mkdir D start_creating+0x65/0xb0
ovl_start_creating_temp+0xb0/0xe0 [overlay]
ovl_create_temp+0xa3/0x1d0 [overlay]
ovl_copy_up_one+0x1f1c/0x21c0 [overlay]
ovl_copy_up_flags+0xf5/0x140 [overlay]
ovl_create_object+0xb7/0x220 [overlay]
ovl_mkdir+0x23/0x40 [overlay]
Drop the end_creating() from the branch and let out: own the cleanup,
which is what every other error path in this function already does. |
