| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings. |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available. |
| Memory Corruption via Uncanceled AIO Requests on Error: libkcapi's one-shot AIO path can return an error before all submitted IOCBs are drained, allowing later kernel writes into caller-owned output buffers. |
| A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe/TCP subsystem in the Linux kernel. This issue may allow a malicious user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation. |
| A vulnerability was found in MariaDB. An OpenVAS port scan on ports 3306 and 4567 allows a malicious remote client to cause a denial of service. |
| An out-of-bounds memory access flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user generates a malicious (too big) networking packet when napi frags is enabled. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| A flaw was found in dogtag-pki and pki-core. The token authentication scheme can be bypassed with a LDAP injection. By passing the query string parameter sessionID=*, an attacker can authenticate with an existing session saved in the LDAP directory server, which may lead to escalation of privilege. |
| A use-after-free flaw was found in the Linux kernel's netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system. |
| A NULL pointer dereference flaw was found in vmxnet3_rq_cleanup in drivers/net/vmxnet3/vmxnet3_drv.c in the networking sub-component in vmxnet3 in the Linux Kernel. This issue may allow a local attacker with normal user privilege to cause a denial of service due to a missing sanity check during cleanup. |
| A vulnerability was found in subscription-manager that allows local privilege escalation due to inadequate authorization. The D-Bus interface com.redhat.RHSM1 exposes a significant number of methods to all users that could change the state of the registration. By using the com.redhat.RHSM1.Config.SetAll() method, a low-privileged local user could tamper with the state of the registration, by unregistering the system or by changing the current entitlements. This flaw allows an attacker to set arbitrary configuration directives for /etc/rhsm/rhsm.conf, which can be abused to cause a local privilege escalation to an unconfined root. |
| An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h->nets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system. |
| A vulnerability was found in insights-client. This security issue occurs because of insecure file operations or unsafe handling of temporary files and directories that lead to local privilege escalation. Before the insights-client has been registered on the system by root, an unprivileged local user or attacker could create the /var/tmp/insights-client directory (owning the directory with read, write, and execute permissions) on the system. After the insights-client is registered by root, an attacker could then control the directory content that insights are using by putting malicious scripts into it and executing arbitrary code as root (trivially bypassing SELinux protections because insights processes are allowed to disable SELinux system-wide). |
| A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server. |
| IN THE EXTENSION SCRIPT, a SQL Injection vulnerability was found in PostgreSQL if it uses @extowner@, @extschema@, or @extschema:...@ inside a quoting construct (dollar quoting, '', or ""). If an administrator has installed files of a vulnerable, trusted, non-bundled extension, an attacker with database-level CREATE privilege can execute arbitrary code as the bootstrap superuser. |
| A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period. |
| A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure. |
| A flaw was found in Samba’s vfs_worm module. The module is intended to provide write-once, read-many (WORM) protections by preventing modification of files after a configurable grace period. Due to insufficient validation during rename operations, an authenticated user with write access to a share could overwrite a protected file by renaming a newly created file over the existing WORM-protected file. |
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| A flaw was found in RESTEasy's SourceProvider. This vulnerability allows an unauthenticated attacker to perform an unauthenticated remote file read. By sending a specially crafted XML body with a DOCTYPE declaration referencing external entities to an endpoint that accepts application/xml and returns Source or StreamSource, the server can be tricked into resolving the entity and including sensitive file contents in the HTTP response. This is due to the SourceProvider.writeTo() method creating a SAXParser without disabling external entity resolution, leading to an XML External Entity (XXE) vulnerability. |
| A flaw was found in the cookie parsing logic of the libsoup HTTP library, used in GNOME applications and other software. The vulnerability arises when processing the expiration date of cookies, where a specially crafted value can trigger an integer overflow. This may result in undefined behavior, allowing an attacker to bypass cookie expiration logic, causing persistent or unintended cookie behavior. The issue stems from improper validation of large integer inputs during date arithmetic operations within the cookie parsing routines. |