| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inefficient algorithmic complexity in the Erlang/OTP asn1 OBJECT IDENTIFIER decoder allows a remote unauthenticated attacker to cause denial of service by sending a crafted OID during the TLS handshake.
The BER OID decoder asn1rtt_ber:dec_subidentifiers/3 in lib/asn1/src/asn1rtt_ber.erl and the equivalent PER helper asn1rtt_per_common:dec_subidentifiers/3 in lib/asn1/src/asn1rtt_per_common.erl accumulate a base-128 subidentifier into an unbounded integer using (Av bsl 7) + H per continuation byte. Each shift and addition on the growing accumulator is linear in the number of bits already accumulated, giving quadratic total work in the size of a single subidentifier. The JER helper asn1rtt_jer:json2oid/1 in lib/asn1/src/asn1rtt_jer.erl exhibits the same class of unbounded-integer parsing when decoding a dot-separated OID from JSON. A DER-encoded OBJECT IDENTIFIER with one very large arc (approximately 262 KB of continuation bytes) consumes roughly 13 seconds of CPU on typical hardware.
The vulnerable decoder is generated into every ASN.1 module that contains an OBJECT IDENTIFIER, including OTP-PUB-KEY which is reached during X.509 certificate parsing via public_key:pkix_decode_cert/2. This decoder runs before any signature or trust chain verification, so any Erlang service that parses peer TLS certificates is exposed: the default for TLS clients (which always parse the server certificate) and for mutual-TLS servers (which parse client certificates).
This vulnerability is associated with program files lib/asn1/src/asn1rtt_ber.erl, lib/asn1/src/asn1rtt_per_common.erl and lib/asn1/src/asn1rtt_jer.erl and program routines asn1rtt_ber:dec_subidentifiers/3, asn1rtt_per_common:dec_subidentifiers/3 and asn1rtt_jer:json2oid/1.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.18, OTP 28.5.0.7, and OTP 29.1.1, corresponding to asn1 from 3.0 before 5.3.4.3, 5.4.3.1, and 5.5.2. Whether OTP before OTP 17.0, corresponding to asn1 before 3.0, is affected is unknown. |
| Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, 9.6.2.3, and 9.7.2. |
| Incorrect Authorization vulnerability in Erlang OTP (inets modules) allows unauthenticated access to CGI scripts protected by directory rules when served via script_alias.
When script_alias maps a URL prefix to a directory outside DocumentRoot, mod_auth evaluates directory-based access controls against the DocumentRoot-relative path while mod_cgi executes the script at the ScriptAlias-resolved path. This path mismatch allows unauthenticated access to CGI scripts that directory rules were meant to protect.
This vulnerability is associated with program files lib/inets/src/http_server/mod_alias.erl, lib/inets/src/http_server/mod_auth.erl, and lib/inets/src/http_server/mod_cgi.erl.
This issue affects OTP from OTP 17.0 before OTP 26.2.5.19, OTP 27.3.4.10, and OTP 28.4.2, corresponding to inets from 5.10 before 9.1.0.6, 9.3.2.4, and 9.6.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| The Erlang/OTP ssl TLS 1.2 (and earlier) and DTLS client does not verify that the cipher suite selected by the server in ServerHello was among the suites offered by the client in ClientHello. The client-side tls_handshake:hello/5 handler validates the negotiated protocol version and the downgrade sentinel but hands the server-chosen suite directly to ssl_handshake:handle_server_hello_extensions/9, which installs it without a membership check. The TLS 1.3 client path performs this check (per RFC 8446), so it is not affected.
An on-path attacker between the client and the intended server can respond with a ServerHello selecting an anonymous key exchange suite such as TLS_DH_anon_* or TLS_ECDH_anon_* that the client never offered. Anonymous suites do not require the server to present a certificate, so the entire verify_peer and cacerts configuration is bypassed: the attacker completes the handshake with its own ephemeral parameters, no certificate is validated, no hostname is checked, and ssl:connect returns {ok, Socket}. All subsequent application traffic is readable and modifiable by the attacker.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to ssl from 5.3.4 before 11.2.12.11, from 11.3 before 11.6.0.4, and from 11.7 before 11.7.4. Whether OTP before OTP 17.0, corresponding to ssl before 5.3.4, is affected is unknown. |
| Improper Enforcement of Message Integrity During Transmission in a Communication Channel vulnerability in Erlang/OTP ssl (tls_gen_connection module) allows a network-positioned attacker to inject unauthenticated plaintext that the TLS client application later treats as authenticated server data.
The function tls_gen_connection:handle_protocol_record/3 rejects APPLICATION_DATA records that arrive in pre-handshake states when the TLS endpoint acts as a server, but does not apply the same check when the endpoint acts as a client. A network-positioned attacker can send plaintext APPLICATION_DATA records to the client during the handshake. The records are buffered and, once the handshake completes successfully, delivered to the application as if they were authenticated post-handshake data. The attacker cannot observe the client's response or steer the connection, so the impact is limited to blind injection of unauthenticated bytes. The injection window is wider for TLS versions prior to TLS 1.3 than for TLS 1.3.
This vulnerability is associated with program file lib/ssl/src/tls_gen_connection.erl.
TLS 1.3 is affected starting with OTP 22.0, when TLS 1.3 support was added.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.14, from OTP 28.0 before OTP 28.5.0.3, and from OTP 29.0 before OTP 29.0.3, corresponding to ssl from 5.3.4 before 11.2.12.10, from 11.3 before 11.6.0.3, and from 11.7 before 11.7.3. Whether OTP before OTP 17.0, corresponding to ssl before 5.3.4, is affected is unknown. |
| Erlang/OTP is a set of libraries for the Erlang programming language. In versions prior to OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25), Erlang/OTP SSH fails to enforce strict KEX handshake hardening measures by allowing optional messages to be exchanged. This allows a Man-in-the-Middle attacker to inject these messages in a connection during the handshake. This issue has been patched in versions OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25). |
| OTP is a set of Erlang libraries, which consists of the Erlang runtime system, a number of ready-to-use components mainly written in Erlang, and a set of design principles for Erlang programs. A regression was introduced into the ssl application of OTP starting at OTP-25.3.2.8, OTP-26.2, and OTP-27.0, resulting in a server or client verifying the peer when incorrect extended key usage is presented (i.e., a server will verify a client if they have server auth ext key usage and vice versa). |
| Erlang is a programming language and runtime system for building massively scalable soft real-time systems with requirements on high availability. OTP is a set of Erlang libraries, which consists of the Erlang runtime system, a number of ready-to-use components mainly written in Erlang. Packet size is not verified properly for SFTP packets. As a result when multiple SSH packets (conforming to max SSH packet size) are received by ssh, they might be combined into an SFTP packet which will exceed the max allowed packet size and potentially cause large amount of memory to be allocated. Note that situation described above can only happen for successfully authenticated users after completing the SSH handshake. This issue has been patched in OTP versions 27.2.4, 26.2.5.9, and 25.3.2.18. There are no known workarounds for this vulnerability. |
| Erlang/OTP is a set of libraries for the Erlang programming language. Prior to versions OTP-27.3.1, 26.2.5.10, and 25.3.2.19, a maliciously formed KEX init message can result with high memory usage. Implementation does not verify RFC specified limits on algorithm names (64 characters) provided in KEX init message. Big KEX init packet may lead to inefficient processing of the error data. As a result, large amount of memory will be allocated for processing malicious data. Versions OTP-27.3.1, OTP-26.2.5.10, and OTP-25.3.2.19 fix the issue. Some workarounds are available. One may set option `parallel_login` to `false` and/or reduce the `max_sessions` option. |
| Erlang/OTP is a set of libraries for the Erlang programming language. Prior to versions OTP-27.3.3, OTP-26.2.5.11, and OTP-25.3.2.20, a SSH server may allow an attacker to perform unauthenticated remote code execution (RCE). By exploiting a flaw in SSH protocol message handling, a malicious actor could gain unauthorized access to affected systems and execute arbitrary commands without valid credentials. This issue is patched in versions OTP-27.3.3, OTP-26.2.5.11, and OTP-25.3.2.20. A temporary workaround involves disabling the SSH server or to prevent access via firewall rules. |
