| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: clear IPv4 options after rebasing tunnel ICMP errors
ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the
quoted original request before passing it to icmp_send(). However,
IPCB(skb)->opt still describes the outer IPv4 header.
A timestamp option in the outer header can therefore leave an offset
that points into the quoted transport header after the rebase.
__ip_options_echo() treats a byte at that stale location as the option
length and copies it into the fixed-size option storage on the
__icmp_send() stack, causing a stack out-of-bounds write.
Clear the stale option metadata after resetting the network header.
Keep the remaining control block fields, including the ingress
interface used by the ICMP response path. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - fix information leak in evdev_pass_values()
In evdev_pass_values(), the input_event structure is allocated on the
kernel stack and populated field-by-field. However, it is never fully
initialized. On architectures where struct input_event contains explicit
or implicit padding (such as the 32-bit __pad field on SPARC64), these
padding bytes are left uninitialized.
When this event structure is subsequently passed to the client buffer
and later copied to userspace, the uninitialized padding bytes leak
kernel stack memory, potentially exposing sensitive information.
Similar issues exist in __evdev_queue_syn_dropped and __pass_event.
Fix this by explicitly zeroing the entire event structure with memset()
before populating its fields. This ensures all padding bytes are cleared
before the data crosses the security boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check
in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT
endpoint size. Both are taken independently from different endpoints
in usbio_probe(), so the check is wrong when they differ.
Use rxbuf_len for the IN direction. This matches the buffer that
actually holds the response data. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write on Type II inbound URBs
data_ep_set_params() sizes each URB transfer buffer before it adds the
Format Type II transfer delimiter:
u->packets = urb_packs;
u->buffer_size = maxsize * u->packets;
if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
u->packets++; /* for transfer delimiter */
u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
buffer_size is computed from the pre-increment packet count and never
recomputed, so for a Type II endpoint the buffer is one packet short of
the packet count the URB is built with.
prepare_inbound_urb() then lays out one iso frame per packet and never
consults buffer_size:
offs = 0;
for (i = 0; i < urb_ctx->packets; i++) {
urb->iso_frame_desc[i].offset = offs;
urb->iso_frame_desc[i].length = ep->curpacksize;
offs += ep->curpacksize;
}
urb->transfer_buffer_length = offs;
urb->number_of_packets = urb_ctx->packets;
The last descriptor therefore points one packet past the end of the
transfer buffer, where the host controller writes device data on every
inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound
their fill loops by ctx->buffer_size, so only capture is affected.
fmt_type comes from the device's audio streaming descriptors, so any
device advertising a Type II capture format hits this once userspace sets
hw_params on the stream.
KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report
per inbound transfer:
BUG: KASAN: slab-out-of-bounds in dummy_timer
Write of size 64 at addr ffff0000186171c0 by task cons02/166
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 166:
usb_alloc_coherent
snd_usb_endpoint_set_params
The buggy address is located 0 bytes to the right of
allocated 64-byte region [ffff000018617180, ffff0000186171c0)
Compute buffer_size after the delimiter packet has been accounted for,
and bound the fill loop by buffer_size, as prepare_silent_urb() already
does on the outbound side. This grows every Type II URB allocation by
one maxsize packet.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: at91sam9_wdt: prevent timer rearm during teardown
at91_ping() rearms the watchdog timer from its callback. timer_delete()
neither waits for a running callback nor prevents it from rearming the
timer, so probe failure or driver removal can leave the timer accessing the
devm-allocated at91wdt after it has been freed.
Use timer_shutdown_sync() on both teardown paths. It waits for a running
callback and rejects any attempt by the callback to rearm the timer. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: clear control chunk transport if it is being removed
sctp_make_heartbeat_ack() caches the destination transport in
chunk->transport without taking a reference. When src_out_of_asoc_ok is
enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead
of being transmitted immediately.
If the peer transport is removed while the chunk is still queued,
sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing,
but only clears cached transport pointers in out_chunk_list. The queued
control chunk therefore retains a dangling transport pointer.
Once an ASCONF_ACK clears the suppression and the queued control chunk is
transmitted, SCTP dereferences the stale transport pointer, leading to a
use-after-free.
Fix this by also clearing chunk->transport for queued control chunks in
control_chunk_list when removing the transport. |
| In the Linux kernel, the following vulnerability has been resolved:
net/openvswitch: check Ethernet header length in key_extract()
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: fix potential use-after-free in tunnel segmentation
__skb_udp_tunnel_segment() gets the UDP header before ensuring the
tunnel header is in the skb head. If the pull reallocates skb->head,
the saved UDP header pointer is no longer valid.
Get the UDP header after the pull to avoid a potential use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix buffer length in create_direct_keys()
We have seen in our CI the following KASAN message:
BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core]
Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764
[...]
[<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core]
[<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core]
[<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa]
[<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa]
[...]
The buggy address is located 4128 bytes inside of
allocated 4384-byte region [0000000176794000, 0000000176795120)
So in essence we read 16 bytes beyond 4384-byte allocation.
create_direct_keys calculates the pointer and length for in and out
buffers.
The size calculation for in includes the entire structure
size (out + in + mtt[]) but the pointer passed to cmd_exec points only
to the 'in' field, skipping the 'out' field.
This causes mlx5_copy_to_msg() to read beyond the allocated buffer
by sizeof(out) bytes when copying command data.
Properly calculate the input size to match the pointer and allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages()
Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma)
before returning an error code to the caller. This is incorrect:
amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling
amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo
that registration. Calling vm_ops->close() manually — which drops the
shmem pages_pin_count and the GEM object reference that backs the VMA —
before the mmap syscall has even returned causes those resources to be
released while the VMA is still alive. The kernel VMA teardown will call
vm_ops->close() a second time when the process later unmaps the range,
producing a reference count underflow.
Replace both hard-error returns with a deferred-fault approach that keeps
the VMA alive and retries page insertion through the HMM range-fault path. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject inline extents without valid headers
[BUG]
For a crafted btrfs image, the following KASAN can be triggered when
reading an inline lzo compressed file extent:
BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700
Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x70
print_report+0xd1/0x610
kasan_report+0xe0/0x110
__asan_report_load_n_noabort+0x13/0x20
lzo_decompress+0x57d/0x700
btrfs_decompress+0x140/0x1c0
uncompress_inline+0x147/0x1b0
btrfs_get_extent+0xb23/0x10a0
btrfs_do_readpage.constprop.0+0x538/0x1ac0
btrfs_readahead+0x32f/0x5f0
read_pages+0x16f/0x850
page_cache_ra_unbounded+0x296/0x490
do_page_cache_ra+0xd9/0x130
page_cache_sync_ra+0x3ee/0x6f0
filemap_get_pages+0x306/0x15c0
filemap_read+0x329/0xd00
btrfs_file_read_iter+0x1f8/0x2b0
vfs_read+0x4ef/0x720
ksys_read+0xf8/0x1d0
__x64_sys_read+0x71/0xb0
x64_sys_call+0x1ab0/0x1b70
do_syscall_64+0x61/0x470
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
[CAUSE]
For an inline lzo compressed file extent, there should always be one lzo
header, recording the total length of the compressed data, followed by
one segment header, recording the compressed lzo payload.
But if a crafted inline lzo compressed file extent contains only an lzo
header, without the segment header or payload, lzo_decompress() will
still try to read the segment header, causing a read beyond the item
boundary.
Furthermore if the inline lzo compressed file extent is the first item
of the leaf, it will be at the extent buffer boundary. The above
out-of-boundary read will go beyond the extent buffer boundary,
triggering the above KASAN report.
[FIX]
Validate the total length of the inlined lzo compressed file extent, to
make sure there is at least one LZO header and one segment header, and a
non-zero payload.
[ Rework the commit message to remove slop ] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: handle NULL b_addr in xfs_buf_free
When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with
bp->b_addr still NULL. The code falls through to the folio_put path
which calls virt_to_folio(NULL), dereferencing an invalid address and
causing a kernel crash.
Call Trace:
xfs_buf_free+0x25f/0x510
xfs_buf_alloc+0xc98/0x19b0
xfs_buf_find_insert+0x55/0x14d0
xfs_buf_get_map+0x122b/0x17c0
xfbtree_init_leaf_block+0x11c/0x4a0
xfbtree_init+0x1bb/0x460
xrep_rmap_setup_scan+0x100/0x1f0
xrep_rmapbt+0x41/0xc0
Fix this by skipping folio_put() when bp->b_addr is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us144mkii: re-anchor capture URBs on resubmission
capture_urb_complete() resubmits each capture URB without anchoring it:
usb_get_urb(urb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
Anchoring is a property of a submission, not of the URB. The giveback
path calls usb_unanchor_urb() before urb->complete(), so an URB
resubmitted from its own completion handler is off the anchor. The
capture URBs are anchored once, at stream start, so from the first
completion onward tascam->capture_anchor is empty.
tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the
stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor)
to reap the capture URBs before anything is freed. With the anchor empty
those calls return immediately and the URBs stay queued on the host
controller.
tascam_free_urbs() then returns the capture transfer buffers with
usb_free_coherent(), and snd_card_free() releases the snd_card
allocation that embeds tascam (card->private_data). The controller
completes the queued URBs afterwards, writing device-supplied data into
the freed transfer buffer, and capture_urb_complete() dereferences the
freed driver object.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in dummy_timer
Write of size 512 at addr ffff000015b62000
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 64:
usb_alloc_coherent
tascam_alloc_urbs
tascam_probe
Freed by task 170:
usb_free_coherent
tascam_free_urbs
tascam_disconnect
usb_unbind_interface
BUG: KASAN: slab-use-after-free in capture_urb_complete
Read of size 4 at addr ffff0000170ee878
Freed by task 170:
release_card_device
snd_card_free
tascam_disconnect
Restore the usb_anchor_urb() between the reference count bump and the
resubmission. That also makes the handler's usb_unanchor_urb() failure
arm meaningful again and restores usb_kill_anchored_urbs() as a barrier
on the disconnect, suspend and stop-work paths.
The anchoring was removed on the premise that the URB is already anchored
from the initial submission, which does not hold once the first giveback
has run.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: Shut down rtpoll_timer in psi_cgroup_free()
psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath
and can race psi_trigger_destroy() taking down the last rtpoll trigger under
rtpoll_trigger_lock:
psi_schedule_rtpoll_work() psi_trigger_destroy()
rcu_read_lock();
task = rcu_dereference(rtpoll_task);
rcu_assign_pointer(rtpoll_task, NULL);
timer_delete(&rtpoll_timer);
mod_timer(&rtpoll_timer, ...);
rcu_read_unlock();
synchronize_rcu();
kthread_stop(task_to_destroy);
The group can then be freed with the re-armed timer still pending, and
poll_timer_fn() runs on freed memory.
461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling
mechanism") deleted the timer synchronously after the synchronize_rcu(),
which prevented this but raced trigger creation instead: the deletion could
cancel the timer that a new trigger set armed during the grace period and,
as creation also reinitialized the timer at the time, corrupt it.
8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the
initialization into group_init() and the deletion into the locked section,
trading the creation races for the window above.
Neither placement in the destruction path works. A pending timer firing
while the group is alive is harmless though. poll_timer_fn() just wakes the
rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's
lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it
by then. timer_shutdown_sync() because the timer is never armed again. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: read virtqueues under worker locks
Commit bd50c5dc182b ("vsock/virtio: add support for device
suspend/resume") made the *_run flags transition from false to true when
restore installs replacement virtqueues. The RX, TX and event workers
read their virtqueue before locking and checking the corresponding flag,
so a worker delayed across freeze and restore can observe the replacement
queue's running state while retaining a pointer to the deleted queue.
Read each virtqueue under its mutex after checking the run flag, keeping
the pointer and state in the same queue generation. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix sk_buff leak when the header checks reject a packet
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atlantic: free RX pages of consumed but not refilled buffers
aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to
hardware. Since the page reuse strategy was added, a cleaned RX buffer
keeps its page (and its DMA mapping) in the ring for reuse, and refill
is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES
slots are free. Slots that were consumed but not yet reposted therefore
sit in the complementary [sw_tail, sw_head) gap with a live page, and
the deinit walk never visits them: up to a refill batch worth of pages
and DMA mappings leak on every interface down.
Walk the whole ring instead and release whatever is still there. Also
bail out if the buffer ring is already gone: a partial
aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so
aq_ptp_ring_deinit() still gets here on the unwind path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: devmem: prevent net-iov / page mixing
We should either have net_iov or page backed frags in a single skb,
otherwise it blows up down the stack. Don't allow mixing in
zerocopy_fill_skb_from_devmem(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent in6_dev_get() from resurrecting inet6_dev
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits. |
| In the Linux kernel, the following vulnerability has been resolved:
net: smc: fix splice entry lifetime imbalance in smc_rx_splice
smc_rx_splice() passes pages to splice_to_pipe() before taking the
references that cover the lifetime of each splice entry. In the
VM-backed RMB path, splice_to_pipe() may drop unqueued entries through
smc_rx_spd_release(), while queued entries are released later via the
pipe buffer callback.
The old post-splice accounting also derives the number of queued VM pages
from an offset mutated while building the descriptor, and a multi-page
splice pairs one sock_hold() with multiple sock_put() calls.
Take the page and socket references for every candidate entry before
splice_to_pipe(), and drop the matching private state, page reference,
and socket reference from smc_rx_spd_release() for entries that never
get queued. This fixes a refcount imbalance that can underflow page
refcounts and trigger a use-after-free. |
