| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark signal tracepoint siginfo arguments as scalar
The signal_generate and signal_deliver tracepoints declare their info
argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore
treats it as a trusted pointer for tp_btf programs.
Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special
values for this argument. Those values are zero and one respectively,
and are not pointers. A tp_btf program can currently dereference either
value and fault the kernel. In particular, signal_generate can run from
timer interrupt context, turning the fault into a kernel panic.
Record both tracepoints in raw_tp_null_args[] and mark argument one as
a non-pointer. This preserves scalar access to the cookie while rejecting
direct and helper-mediated pointer use. Merely marking it nullable would
not suffice because SEND_SIG_PRIV is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: disable LZ4 rolling decompression for now
LZ4 rolling decompression [1] was introduced to reduce the memory
footprint of temporary pages:
For many cases, it is needed for users to read small data within
a compressed extent (pcluster), either due to random small read, or
since uptodate folios (typically order-0) cannot be reused for
decompression again since decompression algorithm refills
already-uptodate folios.
Rolling decompression works because LZ4 is LZ77-based and only refers
to the most recent 64 KiB of decompressed data, so in theory only a
bounded rolling window of temporary pages is needed when decompressing.
It can save a lot of temporary memory, e.g.
601,960-byte data can be compressed into a 256k LZ4 compressed extent,
which means it needs 146 extra pages per request in the worst case if
rolling decompression is disabled.
However, the upstream LZ4 implementation is not under EROFS' control:
For example, the literal copy memmove() may still **copy long literals
backward** on x86 based on the address comparison even when the source
and destination ranges do not overlap (IOWs, inline decompression
doesn't need to be considered here). That breaks the rolling assumption
and makes the optimization broken.
Disable it for now to make sure the data correctness first since EROFS
is used everywhere now: The rolling window approach can be revived once
we either ensure that the official LZ4 code always copies forward for
non-overlapping ranges or maintain our own LZ4 implementation in EROFS.
The main impact is a higher runtime memory footprint; However, recent
commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4
decompression") helps mitigate this when enabled but it's still not
perfect.
[1] https://www.usenix.org/conference/atc19/presentation/gao
§ 3.3 Decompression |
| A path traversal vulnerability (CWE-22) in the embedded VMDK filesystem extractor in Google OSV-SCALIBR versions 0.3.6 through 0.5.0 allows an attacker who controls the scan target to write arbitrary files to the host system. When scanning crafted VMDK images, insufficient validation of archive path entries allows file extractions to escape destination directories. |
| A flaw was found in GDB's STABS debug format parser. The
read_member_functions() function in gdb/stabsread.c contains a linked
list removal bug in the code that separates destructor and non-destructor
member functions of C++ classes. The bug causes the destructor entries to
remain in the main function list while the list length counter is
decremented, resulting in an out-of-bounds write when the function list
is copied to its final allocated array. An attacker can craft an ELF
binary with malicious .stab and .stabstr sections that triggers this
out-of-bounds write when a user opens the file in GDB and performs any
symbol-inspection operation such as setting a breakpoint. The inferior
process does not need to be executed. Under controlled conditions, this
was demonstrated to achieve execution of arbitrary commands within the
GDB process. |
| Reflected XSS in Netron versions <=9.1.2 on desktop application through unsanitized node names allows an attacker to hide certain nodes, perform port scanning or abuse a Chrome n-day to achieve Remote Code Execution. |
| Reflected XSS in Netron versions <=9.1.2 on desktop application through unsanitized node names allows an attacker to hide certain nodes, perform port scanning or abuse a Chrome n-day to achieve Remote Code Execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op. For the FIN case that is harmless - the socket the FIN
arrived on is the very socket the teardown just released. It is not
harmless for a dropper that attached something to the path first.
rds_tcp_accept_one() is such a dropper. Its path claim in
rds_tcp_accept_one_path() transitions RDS_CONN_DOWN ->
RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous
socket in softirq context, an administrative reset - can put the path
into RDS_CONN_ERROR between that claim and the state check that
follows, which accepts RDS_CONN_ERROR. The accept then installs the
freshly accepted socket with rds_tcp_set_callbacks() while the queued
teardown - which sampled tc->t_sock before this socket existed - is
still running. rds_connect_path_complete() fails its transition to
RDS_CONN_UP and drops the path again, queueing the pass that should
reap the socket it just installed. If the in-flight shutdown's final
transition consumes that drop's RDS_CONN_ERROR, the queued pass finds
the path in RDS_CONN_DOWN and does nothing. The installed socket is
never torn down: it sits established with its callbacks armed and its
rds_tcp_connection on rds_tcp_tc_list, the peer sees a connection that
nothing ever reads, and the path is wedged in RDS_CONN_DOWN until some
later event drops it again. Reproduced with widened race windows as
an ever-growing receive queue on a socket owned by a path stuck in
RDS_CONN_DOWN, with the peer's send path wedged behind it.
Make the final transition only DISCONNECTING -> DOWN. If it fails
because the path is in RDS_CONN_ERROR, a drop raced the teardown:
cancel the reconnect timer and clear RDS_RECONNECT_PENDING - the one
piece of the skipped tail that must not be left behind - and return,
letting the pass the drop queued finish the job: it tears down
whatever attached to the path in the meantime, completes the
transition to RDS_CONN_DOWN, and re-arms the reconnect from its own
tail.
The timer quiesce in that branch matters because the racing drop does
not always queue that pass: rds_conn_path_drop() returns without
queueing when a destroy is pending - exactly the situation during a
netns teardown or module unload, when a FIN on the dying socket is
processed while rds_conn_path_destroy() flushes cp_down_w. If the
flushed pass is the one that takes this return, no later pass exists,
and rds_conn_path_destroy() would find cp_conn_w still armed
(WARN_ON) and then free a path whose reconnect timer can still fire.
With the cancel in the branch, every exit of a shutdown pass leaves
the timer quiesced no matter which pass completes the transition.
The FIN case keeps making progress, one pass later and still without
noisy logging. Any other state keeps today's rds_conn_path_error()
handling; no current cp_state writer can leave a DISCONNECTING path
in anything but RDS_CONN_ERROR (every other writer is a cmpxchg from
a non-DISCONNECTING state), so that branch is defensive.
On kernels without the preceding patches the same hazard exists with
the sample-based quiesce; the fix applies there equally. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire the fastpath locks in rds_conn_shutdown()
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state. acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.
Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently"). Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.
Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly with a wake-up afterwards. Both are released with
clear_bit_unlock(), so that the ring re-initialization done by the
transport shutdown and the transmit state rewritten by
rds_send_path_reset() are ordered before either bit is seen clear by
the next acquire_in_xmit() or acquire_refill().
The fastpath users of these bits - rds_send_xmit() and
rds_ib_recv_refill() - are trylock style and back off while teardown
owns the locks, so no new lock dependency is introduced for them.
rds_tcp_reset_callbacks() is different: since the previous patch it
acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now
spans the teardown instead of at most one send batch. That waiter
runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue
and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so
a duelling SYN accepted while its path is being torn down parks
accept processing for the duration of the teardown - for TCP bounded
by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB
path's drain in rds_ib_conn_path_shutdown() has no round cap, but no
blocking waiter either: rds_tcp_reset_callbacks() is the only blocking
acquirer of these bits and waits only on its own TCP path, and the
fastpaths are trylock-and-back-off on both transports, so a long IB
drain lengthens only that path's own quiesce. The
window is narrow: the accept-side state check has to pass before the
teardown moves the path to RDS_CONN_DISCONNECTING.
Because krdsd is a single global workqueue, everything else queued
there - accept processing for other connections and network
namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop()
during namespace teardown - waits behind the parked accept worker for
that time. It cannot deadlock, although the waits do point at each
other: the teardown blocks until the bit's holder releases it, and
the holder may be that krdsd accept worker. The holder finishes
without needing anything the teardown owns: the sync cancels
rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on
the path's ordered cp_wq, whose only execution slot is occupied by
the blocked cp_down_w itself, so they are pending at most and cancel
without flushing - a reliance on cp_wq being ordered that is now
noted next to those cancels (on
---truncated--- |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Server-side request forgery (ssrf) in Microsoft Exchange Server allows an authorized attacker to perform spoofing over a network. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| The Okta Access Gateway does not sanitize the application label field before including it in the generated nginx configuration file. The unsanitized value is interpolated into an nginx server block directive, resulting in execution of injected directives. |
| A weakness has been identified in mathurvishal CloudClassroom-PHP-Project up to 5dadec098bfbbf3300d60c3494db3fb95b66e7be. The impacted element is an unknown function of the file loginlinkfaculty.php of the component Faculty Authentication. Executing a manipulation of the argument fid/pass can lead to sql injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in Sanluan PublicCMS up to 6.202506.e. This vulnerability affects the function CmsContentAdminController of the file publiccms-parent/publiccms-core/src/main/java/com/publiccms/controller/admin/sys/SysUserAdminController.java of the component exportExcel/exportData. This manipulation of the argument userId/deptId causes authorization bypass. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Flatpak passes through arbitrary vendor-extension keys unmodified when exporting an application's Desktop Entry (.desktop) and D-Bus Service (.service) files, instead of validating against an allowlist. A malicious Flatpak app can use this to cause denial of service (e.g. forced application restart loops) or to influence host D-Bus/systemd activation behavior beyond what the sandbox is intended to permit. |
| Use after free in Views in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| FriendsOfFlarum OAuth allows users to log in to Flarum with GitHub, Twitter, Facebook, and other providers. Prior to 1.7.4 and 2.0.0-beta.4, the Discord OAuth provider does not check the verified field returned for an OAuth email before passing the address to Flarum core as trusted through provideTrustedEmail(). When Discord sign-in is enabled, an unauthenticated attacker who knows the email address of a Flarum user can configure a Discord account with that unverified address and a verified phone number, then sign in to cause Flarum to match the trusted address, link the attacker-controlled Discord identity to the existing user, and authenticate as the victim without a password or victim interaction. Exploitation requires that the victim's email address is not already associated with a Discord account, and it can compromise administrator accounts. Other bundled providers were not confirmed to be practically exploitable by this method because their relevant authentication flows return only verified or confirmed email addresses. This issue is fixed in versions 1.7.4 and 2.0.0-beta.4. |
| The ConvertPlus plugin for WordPress is vulnerable to Deserialization of Untrusted Data in all versions up to, and including, 3.6.3 via the style parameter of the cp_display_preview_modal AJAX action. The vulnerability exists because the action's nonce guard is gated behind an isset() check and fails open when the cp_admin_page_nonce parameter is omitted entirely, no capability check is performed on the callback, and sanitize_text_field() — applied to the $style value before it is concatenated directly into a shortcode string evaluated by do_shortcode() — does not strip shortcode delimiters, allowing an attacker to inject a second, fully attacker-controlled [smile_modal] invocation that causes smile_modal_popup() to pass attacker-supplied base64-decoded bytes to maybe_unserialize() with no allowed_classes restriction. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject a PHP object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| InvoicePlane is a self-hosted open source application for managing invoices, clients, and payments. Prior to 1.7.2, InvoicePlane's Cron::recur() method writes an invalid cron key from the URL path directly to the application log without neutralizing CRLF characters. An unauthenticated requester can place forged log lines into the audit trail by supplying a crafted cron_key value. The injected entries can corrupt forensic records and interfere with log-based monitoring. This issue is fixed in version 1.7.2. |
