| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A command injection flaw was found in rpm. Installing or rebuilding a source RPM whose source or spec file basenames contain a %() macro construct causes rpm to execute an attacker-controlled shell command via popen() while relocating the source file list. This allows arbitrary command execution as the invoking (typically non-root) user, simply by installing, rebuilding, or otherwise processing an untrusted .src.rpm. |
| A flaw was found in rpm. An attacker can supply a crafted manifest file that, when processed by a user or automation using `rpm -q -p` or similar manifest-processing flows, leads to arbitrary code execution. This occurs because manifest entries are unexpectedly macro-expanded before being opened, allowing embedded shell commands to run with the privileges of the `rpm` process. Successful exploitation can lead to a full compromise of confidentiality, integrity, and availability for the affected account. |
| A command injection vulnerability was found in Argo CD Image Updater, where a proxy URL configured on an SSH Git repository is passed unsanitized into a shell-interpreted SSH command. An attacker able to set a malicious proxy value can inject shell metacharacters to execute arbitrary commands and access credentials in the context of the Image Updater process. |
| When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size.
Impact:
An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited. |
| A heap-based buffer overflow was found in the DHCPv6 and TFTP response builders of libslirp. When the host is configured with a small interface MTU, a guest-supplied DHCPv6 CLIENTID option or TFTP blksize option can overflow the reply buffer with attacker-controlled content and length, resulting in denial of service and potentially arbitrary code execution in the host process. The default interface MTU is not affected. |
| A flaw was found in dnsmasq. After a reduction of internal domain-name buffer sizes, the DNSSEC validator can write a few bytes past a name buffer when converting names to and from DNS wire format. An attacker who can cause the server to validate a crafted DNSSEC response may overwrite a small amount of adjacent heap metadata. DNSSEC support is not compiled in by default and must also be enabled at runtime. |
| A flaw was found in parted. A heap-based buffer overflow exists in libparted's file system resizing logic when handling FAT16 volumes. By convincing a user or administrator to resize a specially crafted FAT16 file system image with malformed directory metadata, an attacker can trigger an oversized read into a fixed-size memory buffer. This issue causes memory corruption, resulting in an application crash and a denial of service (DoS). |
| A flaw was found in parted. A heap-based buffer overflow can occur when processing a specially crafted FAT32 filesystem due to an integer calculation error during buffer allocation. A local attacker could exploit this by enticing a user or automated service to open a malicious filesystem image, resulting in an application crash leading to a Denial of Service (DoS) or potential memory corruption. |
| A flaw was found in gdk-pixbuf. When loading a specially crafted JPEG image containing chunked ICC profile markers, an error during ICC profile parsing can leave stale size metadata after the profile buffer is freed. A subsequent allocation in the same decode can cause an out-of-bounds write, potentially crashing the application. To exploit this flaw, an application using gdk-pixbuf must process the malicious JPEG image.
Affected version >= 2.26.4 |
| A flaw was found in 389-ds-base. A remote, authenticated attacker could exploit a vulnerability in the Simple Authentication and Security Layer (SASL) UNBIND process. By sending a specially crafted request, the attacker can cause a connection to stall, leading to resource exhaustion and a Denial of Service (DoS) for the server. |
| A web page that contains unusual WebGPU content loaded into the GPU GLES render process can trigger an OOB write in the GPU user-space driver, leading to memory corruption and possible browser/GPU process crash.
The software writes data past the end of an intended memory offset. Writing outside the bounds of allocated memory can corrupt adjacent memory, crash the process, or cause undefined behaviour. |
| TOTOLINK X18 V9.1.0cu.2053_B20230309 was discovered to contain a command injection vulnerability via the mac parameter in the setEasyMeshAgentCfg function. |
| A stack out-of-bounds write vulnerability was found in gfs2-utils. In savemeta, the height value from on-disk inode metadata is used as a loop bound without bounds checking, causing a stack buffer overflow that may lead to arbitrary code execution when processing crafted GFS2 filesystem images. |
| A stack out-of-bounds write vulnerability was found in gfs2-utils. In gfs2_edit, the di_height field from on-disk inode metadata is used as an array index without bounds checking, causing a stack buffer overflow that may lead to arbitrary code execution when processing crafted GFS2 filesystem images. |
| A flaw was found in iperf3. A remote unauthenticated attacker can exploit a vulnerability in the `JSON_read()` function, which accepts a peer-controlled message length and allocates memory without an upper bound. This allows the attacker to trigger excessive memory consumption, leading to a Denial of Service (DoS) through memory exhaustion, severe slowdown, or termination of the iperf3 service. |
| LibreOffice includes a dBASE database driver, which reads dBASE tables and their .ndx index files when a folder of dBASE files is used as a data source. A heap buffer overflow existed when an index page was read. The number of entries recorded in a page was not checked against the number of entries the page could hold, which comes from a different field of the index header. A crafted index could also make a page refer back to itself, so that reading it recursed without end. In fixed versions the index header and the entry count of each page are limited to what an index page can hold, and a page that refers back to one of its parent pages is not followed. |
| In the Linux kernel, the following vulnerability has been resolved:
module: Fix kernel panic when a symbol st_shndx is out of bounds
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler
The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in
bnxt_async_event_process() uses a firmware-supplied 'type' field
directly as an index into bp->bs_trace[] without bounds validation.
The 'type' field is a 16-bit value extracted from DMA-mapped completion
ring memory that the NIC writes directly to host RAM. A malicious or
compromised NIC can supply any value from 0 to 65535, causing an
out-of-bounds access into kernel heap memory.
The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte
and writes to bs_trace->last_offset and bs_trace->wrapped, leading to
kernel memory corruption or a crash.
Fix by adding a bounds check and defining BNXT_TRACE_MAX as
DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently
defined firmware trace types (0x0 through 0xc). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path. |
