| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
nfs4_server_common_setup() allocates server->delegation_hash_table
first, but server->destroy - the only path that frees the table via
nfs4_destroy_server() - is not assigned until the very end of the
function. If any intermediate step fails (the is_ds_only_client()
check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()),
the function returns with server->destroy still NULL, so the caller's
nfs_free_server() skips the destroy callback and the hash table is
leaked (4 KiB per attempt with the default delegation watermark).
This is trivially reachable from userspace: every failed NFSv4 mount
leaks one allocation. A client that persistently retries a mount that
cannot succeed leaks kernel memory without bound. Observed in
production where a Longhorn backup poller retried mount.nfs4 against
an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of
unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated
12 GiB of leaked slab before the source was identified via the
kmem:kmalloc tracepoint (call_site=nfs4_delegation_hash_alloc).
Reproducer:
# server exports NFSv3 only (or export path absent for v4)
while :; do mount -t nfs4 <server>:/missing /mnt; done
# watch SUnreclaim in /proc/meminfo grow 4 KiB per iteration
Free the table on the error paths between the allocation and the
assignment of server->destroy. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject oversized Read segments at decode time
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts()
plda_init_interrupts() initializes IRQ domains and creates IRQ mapping but
does not unwind them when later step fails.
If platform_get_irq() or either irq_create_mapping() fails
in plda_init_interrupts(), the domains are never deinitialized. If
irq_create_mapping() fails, port->intx_irq stays initialized.
Hence, remove the IRQ domains in the error path by calling
plda_pcie_irq_domain_deinit().
Since plda_pcie_irq_domain_deinit() now disposes of the intx_irq and
msi_irq mappings itself before removing their domains, the msi_irq
mapping failure path can go directly to err_irq_domain_deinit instead of
disposing of port->intx_irq separately first.
This issue was found by automated review of sashiko-bot
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
iommu_mock_device_add() first calls iommu_fwspec_init(), which on
success allocates both dev->iommu (via dev_iommu_get()) and
dev->iommu->fwspec. If the subsequent device_add(dev) call fails,
the error path only calls iommu_fwspec_free(dev), which frees
fwspec but leaves dev->iommu still allocated.
This triggers the following kmemleak report when fuzzing with Syzkaller:
BUG: memory leak
unreferenced object 0xffff888011e0a200 (size 192):
comm "syz.1.1695", pid 24885, jiffies 4295222527
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................
backtrace (crc 25df5bb3):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4575 [inline]
slab_alloc_node mm/slub.c:4899 [inline]
__kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
dev_iommu_get+0x10c/0x1a0 drivers/iommu/iommu.c:408
iommu_fwspec_init+0x288/0x4d0 drivers/iommu/iommu.c:3087
iommu_mock_device_add+0x46/0xb0 drivers/iommu/iommu.c:385
mock_dev_create drivers/iommu/iommufd/selftest.c:1025 [inline]
iommufd_test_mock_domain drivers/iommu/iommufd/selftest.c:1066 [inline]
iommufd_test+0x2f8a/0x6190 drivers/iommu/iommufd/selftest.c:2072
iommufd_fops_ioctl+0x367/0x540 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by calling dev_iommu_free(dev) instead of iommu_fwspec_free(dev)
in the device_add() failure path. dev_iommu_free() frees both fwspec
and the outer dev_iommu struct and clears dev->iommu. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Release current IOAS on xa_store() failure
iommufd_take_all_iova_rwsem() takes an object reference and the
iova_rwsem write lock before storing the IOAS in the temporary ioas_list
xarray.
If xa_store() fails, the current IOAS has not been inserted into
ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS
objects already present in that xarray, so it cannot release the current
IOAS.
Release the current IOAS rwsem and object reference before unwinding the
previously stored entries. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Free system certificate signatures
Multi-certificate support also allows the system authentication object
to store ->signature and ->save_signature, which leak when the driver is
removed. Free the signatures to avoid leaking memory. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: Fix possible memory leak in rtl92du_init_sw_vars()
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: pci: fix resource leak on failed NAPI setup
rtw_pci_probe() allocates PCI resources through
rtw_pci_setup_resource() before it sets up NAPI. If
rtw_pci_napi_init() fails, the error path jumps straight to
err_pci_declaim and skips rtw_pci_destroy(), leaving the PCI
resources allocated by rtw_pci_setup_resource() behind.
Add a dedicated cleanup label for the NAPI setup failure path so probe
destroys the PCI resources.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing current
mainline kernels. The tool is still under development and is not yet
publicly available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable rtw88 PCI board to test with, no runtime testing was able to be
performed. |
| ImageMagick before 7.1.2-30 and 6.9.13-55 fails to properly lower the memory budget when an operation inside OpenPixelCache fails. Repeated triggering of such failures can exhaust the process memory budget and result in a denial of service. |
| rpcapd can allocate up to 65536 bytes per each RPCAP_MSG_UPDATEFILTER_REQ or RPCAP_MSG_STARTCAP_REQ message received from the client, but it never frees the memory, so it leaks memory even under normal use. A malicious client can cause the server to leak memory substantially faster. |
| ImageMagick before 7.1.2-30 and 6.9.13-55 contains a memory leak in the MSL image decoder. A crafted MSL image triggers memory allocation without proper deallocation, allowing an attacker to exhaust memory and cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix DMA fence leak
In ffs_dmabuf_transfer(), a ffs_dma_fence object is kmalloc'd, with the
underlying dma_fence later initialized by dma_fence_init(), which sets
its kref counter to 1. Then, dma_resv_add_fence() gets a second
reference, and a pointer to the ffs_dma_fence is passed as the
usb_request's "context" field.
The dma-resv mechanism will manage the second reference, but the first
reference is never properly released; the ffs_dmabuf_cleanup() function
decreases the reference count, but only to balance with the reference
grab in ffs_dmabuf_signal_done().
The code will then slowly leak memory as more ffs_dma_fence objects are
created without being ever freed.
Address this issue by transferring ownership of the fence to the DMA
reservation object, by calling dma_fence_put() right after
dma_resv_add_fence(). The ffs_dma_fence then gets properly discarded
after being signalled. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix cancellation of a DIO and single read subrequests
When the preparation of a new subrequest for a read fails, if the
subrequest has already been added to the stream->subrequests list, it can't
simply be put and abandoned as the collector may see it. Also, if it
hasn't been queued yet, it has two outstanding refs that both need to be
put. Both DIO read and single-read dispatch fail at this; further, both
differ in the order they do things to the way buffered read works.
Fix cancellation of both DIO-read and single-read subrequests that failed
preparation by the following steps:
(1) Harmonise all three reads (buffered, dio, single) to queue the subreq
before prepping it.
(2) Make all three call netfs_queue_read() to do the queuing.
(3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't
know the length of the subreq at this point.
(4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq
and then call netfs_read_subreq_terminated() to deal with it. This
will pass responsibility off to the collector for dealing with it. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| stomper 5e2741e is vulnerable to Denial of Service. A malicious client can send partial STOMP frames and keep the TCP connections open, which, combined with the broker s use of edge-triggered epoll (EPOLLET) and MSG_PEEK in recv(), causes sockets to enter a permanent half-read state. When enough such connections accumulate, the broker stops receiving any further epoll events for those sockets and eventually hangs in epoll_wait, effectively refusing to process new messages. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the
driver's vdevice_size against the core structure size with a WARN_ON_ONCE.
On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it
skips the mutex_unlock(), leaving the igroup lock held and deadlocking the
next vDEVICE operation on that group.
Jump to out_unlock_igroup instead. |
| When a container-level ErrorHandler is configured (the mitigation for finding 221000), each delivery whose processing throws still permanently consumes one link credit. After initialCredits (default 100) failing messages the receiver's credit reaches zero and the broker stops delivering, leaving the listener silently stalled while isRunning() remains true.
Spring AMQP 4.1.0 |
