| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Fix potential memory leak in rtw_txq_push_skb()
The skb passed to the rtw_hci_tx_write() is expected to be freed when
the function fails, but the error path in rtw_txq_push_skb() does not
free the skb before returning. This can lead to a memory leak in
rtw_txq_push() where a dequeued skb is passed to rtw_txq_push_skb(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: add .shutdown callback to stop rfkill polling on reboot
Since the hardware rfkill polling was introduced, arm64 platforms can
panic with an asynchronous SError during warm reboot:
SError Interrupt on CPU8, code 0x00000000be000011 -- SError
Workqueue: events_power_efficient rfkill_poll [rfkill]
rtw89_pci_ops_read8+0x94/0x160 [rtw89_pci]
rtw89_core_rfkill_poll+0x50/0x1e0 [rtw89_core]
rtw89_ops_rfkill_poll+0x40/0x68 [rtw89_core]
ieee80211_rfkill_poll+0x3c/0x70 [mac80211]
cfg80211_rfkill_poll+0x40/0x2a0 [cfg80211]
rfkill_poll+0x30/0x88 [rfkill]
Kernel panic - not syncing: Asynchronous SError Interrupt
On the reboot path the kernel only runs device_shutdown(), which calls
each driver's .shutdown callback; .remove is not invoked. The rtw89 PCI
driver had no .shutdown callback, so nothing stopped the rfkill polling
work while the platform was tearing the PCIe link down. Once the link
is gone, the next MMIO read from the poll handler targets a
non-responding device and is reported as a fatal asynchronous SError on
arm64.
Add rtw89_pci_shutdown(), wired to all rtw89 PCI device drivers, which
sets a new RTW89_FLAG_SHUTDOWN flag (mirroring the USB
RTW89_FLAG_UNPLUGGED pattern). When the flag is set,
rtw89_ops_rfkill_poll() returns early, so no MMIO read is issued to the
chip after shutdown begins and the SError no longer occurs.
This does not call the full .remove path from .shutdown, to keep the
shutdown handler minimal and avoid running the non-idempotent teardown
twice. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the
interrupt handler to report a status change. If the wait times out, or is
interrupted before the handler runs, the function returns without
balancing the enable_irq() call.
Disable the IRQ before leaving the failed wait path. Also preserve an
interrupted wait's original error code instead of converting it to
-ETIMEDOUT inside the helper. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: drop dma_buf reference on foreign-fd prime import
ttm_prime_fd_to_handle() returns -ENOSYS when the imported fd's
dma_buf->ops do not match the ttm_object_device's ops, but does so
without releasing the reference acquired by dma_buf_get(). Any
unprivileged renderD client passing a non-vmwgfx prime fd through the
DRM_VMW_GB_SURFACE_REF{,_EXT} path leaks one dma_buf reference per
call and indefinitely pins the foreign exporter's GEM resources.
Funnel the error path through the existing dma_buf_put() so the
reference is always dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix leak of ungot volume
Fix afs_lookup_volume_rcu() so that it doesn't leak a dying volume if
afs_try_get_volume() fails. |
| A weakness has been identified in D-Link DWR-M920 1.1.7. This issue affects the function sub_41E60C of the file /boafrm/formPinManageSetup. This manipulation of the argument newPin causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| Affected versions of MISP permit unauthenticated or weakly constrained request paths to perform persistent work without adequate input bounds or rate limiting.
The users/forgot password-reset endpoint accepted an attacker-controlled email value without first imposing a reasonable length bound or validating its format. That value was then used to create an audit log entry and queue a password-reset job, causing the supplied value to be persisted more than once per request. The commit explicitly states that an unbounded unauthenticated request field was stored twice per call with no throttle.
The fix adds:
- a maximum email input length of 1024 bytes;
- email-format validation before persistent work;
- a per-source pre-authentication request budget;
- HTTP 429 responses when that budget is exceeded;
- a 15-minute cooldown for API-access request emails;
- POST-only handling and CSRF protection for the API-access request endpoint.
The new flood filter is specifically intended to limit persistent storage costs from anonymous requests such as password resets, registrations, and failed REST authentication attempts.
Version affected: ≤2.5.45 |
| compression is a Node.js and Express compression middleware. In versions before 1.8.2, when a client aborts the connection while a compressed response is still being sent, the zlib stream created to compress that response is never destroyed, so each aborted compressed response leaks its native zlib memory. A remote unauthenticated attacker can repeatedly open requests and disconnect early, exhausting the available memory and crashing the server. All applications using compression are affected. The issue is fixed in compression 1.8.2, and users should upgrade to 1.8.2 or later. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix layout fence worker double-reference race
The workqueue core clears WORK_STRUCT_PENDING before the callback
is invoked, so delayed_work_pending() in lm_breaker_timedout() can
return false while the fence worker is already running. This lets
the breaker take a duplicate sc_count reference and schedule a new
worker that coalesces with the in-progress one. The extra reference
is never put, leaking the layout stateid.
Replace the racy delayed_work_pending() check with an
ls_fence_inflight boolean set atomically with
refcount_inc_not_zero() under ls_lock, and cleared under ls_lock
before the final nfs4_put_stid() on the dispose path; the retry
path intentionally retains it. Remove the self-rearm
mod_delayed_work() at the top of the worker. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:msghandler: Cancel work cleanly on an error
If an error occurs during startup of an IPMI interface, it may have
scheduled work to run. The work needs to be canceled before the
interface can be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject connection when transport allocation fails
handle_connect_req() returns without action when
svc_rdma_create_xprt() fails to allocate the new transport.
The CM core returns 0 for CONNECT_REQUEST events, so it does
not destroy the new rdma_cm_id. Each allocation failure under
memory pressure leaks one rdma_cm_id, and a remote peer driving
connection attempts can amplify this.
Reject the connection by returning a non-zero status from the
CM event handler, which tells the CM core to destroy the
orphaned cm_id. |
| A vulnerability was detected in Linksys RE7000 2.0.15. This affects the function platform_event_pingTest of the file /cgi-bin/json.cgi?PingTest of the component PingTest Handler. The manipulation of the argument pingTestIp/pingTestPktSize/pingTestTimes results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. |
| A vulnerability was detected in Tenda CP3 27.5.57.101. The affected element is the function sub_2F77E8 of the file Apis/system.c of the component Network Configuration Management. Performing a manipulation results in os command injection. The attack may be initiated remotely. |
| A flaw has been found in ramon-victor freegpt-webui up to 098db3dfeb41555c2ca9269df0f13e10ec1c35dc. Affected by this issue is the function getJailbreak of the file server/backend.py of the component Jailbreak Mode. Executing a manipulation can lead to allocation of resources. The attack can be executed remotely. The exploit has been published and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was identified in Advantech WISE-6610-NB, WISE-6610-EB, WISE-6610-TB, WISE-6610-JB, WISE-6610-CB, WISE-6610-EL-NB, WISE-6610-EL-EB, WISE-6610-EL-TB, WISE-6610-EL-JB, WISE-6610-EL-CB, WISE-6610P-DEA, WISE-6610P-DNA and WISE-6610P-DTA 1.2.1_20251110. This vulnerability affects the function nodered_lib_apply of the component Node-RED Library. Such manipulation of the argument act leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. Upgrading to version 1.2.4_20260821 is able to resolve this issue. It is advisable to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| Issue summary: When OpenSSL processes QUIC traffic from a peer that repeatedly
sends ack-eliciting packets while not acknowledging ACK-only responses, the
QUIC stack can retain ACK-only packet metadata for the lifetime of the
connection.
Impact summary: A remote peer that can complete a QUIC handshake can
cause connection-scoped memory growth which may lead to Denial of Service
through memory exhaustion, especially with sustained traffic or many concurrent
QUIC connections.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: When the OpenSSL QUIC stack sends an ACK-only packet,
there is no requirement by the QUIC protocol that the peer will acknowledge
that ACK-only packet (i.e. it is itself not ack-eliciting). However, the OpenSSL
implementation stores the metadata about the ACK frames regardless.
In and of itself that's ok, but if a malicious peer establishes a connection, and
then drives the connection such that ACK-only packets are forced from the
OpenSSL implementation peer (i.e., by sending numerous PING frames),
and then withholding any subsequent acks for ack-eliciting data, like
legitimate data, said malicious peer can force inappropriate memory growth
on the OpenSSL peer, potentially leading to a Denial of Service.
The fix is to ensure that we account for the transmission of the ACK-only
packet in the packet histories high and low watermark without actually storing
the ACK-only packet metadata itself.
FIPS impact: no
The OpenSSL FIPS module is not affected as the QUIC code is
outside the FIPS module boundary. |
| Issue summary: The OpenSSL Certificate Management Protocol (CMP) caches
additional certificates (extraCerts) sent in a CMP message, but never expunges
them (for instance if they are invalid). If a server reuses an OSSL_CMP_CTX
frequently, this cache of extraCerts may grow unboundedly, and a malicious
client may flood a CMP server with requests driving this growth.
Impact summary: Users utilizing a CMP server that reuses a single OSSL_CMP_CTX
for the lifetime of a server process may observe unbounded memory growth in the
event a malicious client repeatedly sends requests containing unique extra
certificates, which may lead to OOM conditions.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: If a remote user sends CMP messages to a server with a list of
extraCerts and the message is rejected, the extraCerts from the message remains
in the server contexts untrusted certificate stack. This exposes servers with
long lived ctx objects to Denial of Service attacks in which an attacker sends
messages intending to be rejected with a large list of additional certificates
repeatedly, forcing the server to store them indefinitely.
The issue was fixed by removing the added extra certs if the message is
rejected, using the same method as when the context is configured to not do
caching at all.
FIPS impact: no
As the CMP code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
nfs4_server_common_setup() allocates server->delegation_hash_table
first, but server->destroy - the only path that frees the table via
nfs4_destroy_server() - is not assigned until the very end of the
function. If any intermediate step fails (the is_ds_only_client()
check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()),
the function returns with server->destroy still NULL, so the caller's
nfs_free_server() skips the destroy callback and the hash table is
leaked (4 KiB per attempt with the default delegation watermark).
This is trivially reachable from userspace: every failed NFSv4 mount
leaks one allocation. A client that persistently retries a mount that
cannot succeed leaks kernel memory without bound. Observed in
production where a Longhorn backup poller retried mount.nfs4 against
an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of
unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated
12 GiB of leaked slab before the source was identified via the
kmem:kmalloc tracepoint (call_site=nfs4_delegation_hash_alloc).
Reproducer:
# server exports NFSv3 only (or export path absent for v4)
while :; do mount -t nfs4 <server>:/missing /mnt; done
# watch SUnreclaim in /proc/meminfo grow 4 KiB per iteration
Free the table on the error paths between the allocation and the
assignment of server->destroy. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject oversized Read segments at decode time
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module reference via
module_put(), but the caller _svc_xprt_create() does the same
on xpo_create failure, double-putting the single
try_module_get() it acquired. Take a compensating
__module_get() before the svc_xprt_put() to keep the count
balanced, matching the convention in svc_rdma_accept()'s error
path. |
