| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP Windows client before 3.29.0 contains a heap buffer overflow vulnerability in the clipboard virtual channel when processing CLIPRDR_FILE_CONTENTS_RESPONSE PDUs without validating the server-provided size against the destination buffer. A malicious RDP server can send a response with a data payload significantly larger than requested, causing arbitrary heap memory corruption that may enable remote code execution when a user performs a paste operation. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix len check in receive_big()
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for handle opening
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| A heap overflow in SMM module may allow an attacker with access to a second vulnerability that enables writing to SPI flash, potentially resulting in arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb
mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB
header onto every skb and assumes the headroom for them is already
there. That holds for locally generated traffic, where mac80211
reserves hw->extra_tx_headroom, but forwarded frames are sent through
ieee80211_8023_xmit(), which does not reserve it. Bridge a wired
interface to an mt7925u AP and the first forwarded frame that arrives
short panics the kernel:
skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1
kernel BUG at net/core/skbuff.c:212!
Call trace:
skb_panic+0x58/0x60 (P)
skb_push+0x58/0x60
mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common]
mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb]
__mt76_tx_queue_skb+0x54/0xe8 [mt76]
mt76_txq_schedule.part.0+0x204/0x478 [mt76]
mt76_txq_schedule_all+0x50/0x80 [mt76]
mt792x_tx_worker+0x68/0x100 [mt792x_lib]
__mt76_worker_fn+0x84/0x150 [mt76]
Whether a given setup hits it depends on how much headroom the ingress
netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging
onboard ethernet to a Netgear A9000; originally reported on an MT7986
router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet),
which leaves more headroom, helped narrow the trigger to the ingress
path.
The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76:
mt7921: don't assume adequate headroom for SDIO headers"), but mt7925
was copied from mt7921 without the fix. Add the same guard here. |
| Tapo
C100/C101 V5 contains a heap-based buffer overflow vulnerability in the RTSP
service. An authenticated attacker on the local network can send specially
crafted RTSP frame data containing oversized length values, resulting in
out-of-bounds heap writes.
Successful
exploitation can crash the RTSP service and trigger a device reboot, resulting
in a temporary denial-of-service condition. |
| pymonocypher uses cython to wrap the Monocypher C library. Prior to version 4.0.2.8, the argon2i_32 implementation does not check the nb_blocks size. If the caller does not provide a sufficiently large buffer based on the API contract, then argon2i_32 will write past the end of the buffer and possibly corrupt the heap. This issue has been patched in version 4.0.2.8. |
| A flaw was found in the AFP backend in gvfs. When mounting a share, a malicious AFP server can cause the DSI read path to process a length that exceeds the size requested by the client. The function does not verify the server-provided length against the pre-sized reply buffer, causing the operation to access past the intended boundaries. This issue allows a malicious server to overflow a heap buffer and crash the gvfsd-afp process, resulting in a denial of service. |
| A potential security vulnerability has been identified in the HP Support
Assistant for versions prior to 9.53.2.0. The vulnerability
could potentially allow a local attacker to escalate
privileges due to insufficient access controls. |
| A single crafted SSH message gives an unauthenticated network attacker an out-of-bounds stack write of attacker-controlled length and content against any application built on swift-nio-ssh. This vulnerability is addressed in swift-nio-ssh version 0.14.1. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a class permission count below its inherited common
security_get_permissions() maps an inherited common's permissions into
an array sized by the class's own permissions.nprim, but class_read()
takes that nprim verbatim from the policy image and never checks that it
covers the common. A class that inherits a common of N permissions while
declaring a smaller nprim is accepted, and on load the common's
permissions are written past the class-sized array -- an out-of-bounds
heap write.
Reject a class whose permission count is below its inherited common's.
Well-formed policies, where the class count already includes the
inherited permissions, are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a permission value exceeding the class permission count
perm_read() bounds a permission value by SEL_VEC_MAX but never by the
nprim of the owning class or common, which is taken verbatim from the
policy image. security_get_permissions() then writes perms[value - 1]
into an nprim-sized kcalloc() array, so a class declaring fewer
permissions than its largest permission value drives an out-of-bounds
heap write. The top-level symbol tables are validated this way; the
nested per-class permission table is not.
Reject a permission whose value exceeds nprim, which is already set when
perm_read() runs. Well-formed policies are unaffected.
[PM: tweak comment for line length] |
| Description
NGINX JavaScript (njs) has a vulnerability in the XML module's namespace prefix list parser, reachable through the xml.exclusiveC14n() method. An unauthenticated remote attacker can trigger it when an affected NGINX configuration passes an externally controlled XML namespace prefix list to that method. Both the njs and the QuickJS (qjs) engines are affected. A crafted prefix list causes an out-of-bounds write past the end of a heap allocation. With the njs engine, which is the engine used when the js_engine directive is absent, this corrupts adjacent objects and crashes the NGINX worker. With the QuickJS engine, the same call additionally leaks the prefix list on every invocation, causing worker memory to grow across requests. The official nginxinc/nginx-saml reference implementation is affected during SAML signature verification. It reads InclusiveNamespaces/@PrefixList from an untrusted SAML message and passes it to xml.exclusiveC14n() before the signature has been verified, so a valid SAML signature is not required. A crafted SAML Response, Assertion, LogoutRequest, or LogoutResponse is sufficient. Code execution has not been demonstrated and cannot be ruled out for all platforms, as the effect of the out-of-bounds write depends on conditions beyond the attacker's control.
Impact
This vulnerability allows remote attackers to cause a denial of service on the NGINX system, either through repeatable worker restarts or through worker memory growth or possibly trigger code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| GStreamer MRF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of MRF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29608. |
| GStreamer PNG File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29581. |
| Sudo through 1.9.17p2 fails to apply intercept policy checks to the execveat system call in ptrace-based intercept mode. Users permitted to run specific commands can execute denied programs by calling execveat directly or through fexecve, bypassing policy enforcement and logging. |
| A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| GIMP TIF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of TIF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29404. |
| GIMP TIF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of TIF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29398. |
| An issue was discovered in Denx U-Boot before 2026.04. An integer overflow vulnerability exists in function ext4fs_get_bgdtable, the size calculation can lead to under allocation and this underallocated buffer will be used in memcpy() which could lead to arbitrary code execution, a denial of service, or other unspecified impacts. |
