| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: fix plock invalid read
This patch fixes an invalid read showed by KASAN. A unlock will allocate a
"struct plock_op" and a followed send_op() will append it to a global
send_list data structure. In some cases a followed dev_read() moves it
to recv_list and dev_write() will cast it to "struct plock_xop" and access
fields which are only available in those structures. At this point an
invalid read happens by accessing those fields.
To fix this issue the "callback" field is moved to "struct plock_op" to
indicate that a cast to "plock_xop" is allowed and does the additional
"plock_xop" handling if set.
Example of the KASAN output which showed the invalid read:
[ 2064.296453] ==================================================================
[ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm]
[ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484
[ 2064.308168]
[ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9
[ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 2064.311618] Call Trace:
[ 2064.312218] dump_stack_lvl+0x56/0x7b
[ 2064.313150] print_address_description.constprop.8+0x21/0x150
[ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.316595] kasan_report.cold.14+0x7f/0x11b
[ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.318687] dev_write+0x52b/0x5a0 [dlm]
[ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm]
[ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10
[ 2064.321926] vfs_write+0x17e/0x930
[ 2064.322769] ? __fget_light+0x1aa/0x220
[ 2064.323753] ksys_write+0xf1/0x1c0
[ 2064.324548] ? __ia32_sys_read+0xb0/0xb0
[ 2064.325464] do_syscall_64+0x3a/0x80
[ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.327606] RIP: 0033:0x7f807e4ba96f
[ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48
[ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f
[ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010
[ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001
[ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80
[ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001
[ 2064.342857]
[ 2064.343226] Allocated by task 12438:
[ 2064.344057] kasan_save_stack+0x1c/0x40
[ 2064.345079] __kasan_kmalloc+0x84/0xa0
[ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220
[ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm]
[ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0
[ 2064.351070] fcntl_setlk+0x281/0xbc0
[ 2064.352879] do_fcntl+0x5e4/0xfe0
[ 2064.354657] __x64_sys_fcntl+0x11f/0x170
[ 2064.356550] do_syscall_64+0x3a/0x80
[ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.360745]
[ 2064.361511] Last potentially related work creation:
[ 2064.363957] kasan_save_stack+0x1c/0x40
[ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.368100] call_rcu+0x11b/0xf70
[ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.372404] receive_from_sock+0x290/0x770 [dlm]
[ 2064.374607] process_recv_sockets+0x32/0x40 [dlm]
[ 2064.377290] process_one_work+0x9a8/0x16e0
[ 2064.379357] worker_thread+0x87/0xbf0
[ 2064.381188] kthread+0x3ac/0x490
[ 2064.383460] ret_from_fork+0x22/0x30
[ 2064.385588]
[ 2064.386518] Second to last potentially related work creation:
[ 2064.389219] kasan_save_stack+0x1c/0x40
[ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.393303] call_rcu+0x11b/0xf70
[ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.397694] receive_from_sock+0x290/0x770
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use strscpy() instead of strlcpy()
current->comm[] is not a string (no guarantee for a zero byte in it).
strlcpy(s1, s2, l) is calling strlen(s2), potentially
causing out-of-bound access, as reported by syzbot:
detected buffer overflow in __fortify_strlen
------------[ cut here ]------------
kernel BUG at lib/string_helpers.c:980!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 4087 Comm: dhcpcd-run-hooks Not tainted 5.18.0-rc3-syzkaller-01537-g20b87e7c29df #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:fortify_panic+0x18/0x1a lib/string_helpers.c:980
Code: 8c e8 c5 ba e1 fa e9 23 0f bf fa e8 0b 5d 8c f8 eb db 55 48 89 fd e8 e0 49 40 f8 48 89 ee 48 c7 c7 80 f5 26 8a e8 99 09 f1 ff <0f> 0b e8 ca 49 40 f8 48 8b 54 24 18 4c 89 f1 48 c7 c7 00 00 27 8a
RSP: 0018:ffffc900000074a8 EFLAGS: 00010286
RAX: 000000000000002c RBX: ffff88801226b728 RCX: 0000000000000000
RDX: ffff8880198e0000 RSI: ffffffff81600458 RDI: fffff52000000e87
RBP: ffffffff89da2aa0 R08: 000000000000002c R09: 0000000000000000
R10: ffffffff815fae2e R11: 0000000000000000 R12: ffff88801226b700
R13: ffff8880198e0830 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5876ad6ff8 CR3: 000000001a48c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
<IRQ>
__fortify_strlen include/linux/fortify-string.h:128 [inline]
strlcpy include/linux/fortify-string.h:143 [inline]
__set_page_owner_handle+0x2b1/0x3e0 mm/page_owner.c:171
__set_page_owner+0x3e/0x50 mm/page_owner.c:190
prep_new_page mm/page_alloc.c:2441 [inline]
get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408
alloc_pages+0x1aa/0x310 mm/mempolicy.c:2272
alloc_slab_page mm/slub.c:1799 [inline]
allocate_slab+0x26c/0x3c0 mm/slub.c:1944
new_slab mm/slub.c:2004 [inline]
___slab_alloc+0x8df/0xf20 mm/slub.c:3005
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3092
slab_alloc_node mm/slub.c:3183 [inline]
slab_alloc mm/slub.c:3225 [inline]
__kmem_cache_alloc_lru mm/slub.c:3232 [inline]
kmem_cache_alloc+0x360/0x3b0 mm/slub.c:3242
dst_alloc+0x146/0x1f0 net/core/dst.c:92 |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp: fix struct clk leak on probe errors
Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral). |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp: fix reset-controller leak on probe errors
Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).
Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix list iterator in fastrpc_req_mem_unmap_impl
This is another instance of incorrect use of list iterator and
checking it for NULL.
The list iterator value 'map' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty (in this case, the
check 'if (!map) {' will always be false and never exit as expected).
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'map' as a dedicated pointer to
point to the found element.
Without this patch, Kernel crashes with below trace:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 0000ffff7fb03750
...
Call trace:
fastrpc_map_create+0x70/0x290 [fastrpc]
fastrpc_req_mem_map+0xf0/0x2dc [fastrpc]
fastrpc_device_ioctl+0x138/0xc60 [fastrpc]
__arm64_sys_ioctl+0xa8/0xec
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xd4/0xfc
do_el0_svc+0x28/0x90
el0_svc+0x3c/0x130
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x18c/0x190
Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6)
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
uaccess: fix integer overflow on access_ok()
Three architectures check the end of a user access against the
address limit without taking a possible overflow into account.
Passing a negative length or another overflow in here returns
success when it should not.
Use the most common correct implementation here, which optimizes
for a constant 'size' argument, and turns the common case into a
single comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: use try_get_ops() in tpm-space.c
As part of the series conversion to remove nested TPM operations:
https://lore.kernel.org/all/[email protected]/
exposure of the chip->tpm_mutex was removed from much of the upper
level code. In this conversion, tpm2_del_space() was missed. This
didn't matter much because it's usually called closely after a
converted operation, so there's only a very tiny race window where the
chip can be removed before the space flushing is done which causes a
NULL deref on the mutex. However, there are reports of this window
being hit in practice, so fix this by converting tpm2_del_space() to
use tpm_try_get_ops(), which performs all the teardown checks before
acquring the mutex. |
| jsPDF is a library to generate PDFs in JavaScript. Prior to 3.0.1, user control of the first argument of the addImage method results in CPU utilization and denial of service. If given the possibility to pass unsanitised image urls to the addImage method, a user can provide a harmful data-url that results in high CPU utilization and denial of service. Other affected methods are html and addSvgAsImage. The vulnerability was fixed in jsPDF 3.0.1. |
| MongoDB Server may access non-initialized region of memory leading to unexpected behaviour when zero arguments are called in internal aggregation stage. This issue affected MongoDB Server v6.0 version 6.0.3. |
| pgAdmin versions 8.11 and earlier are vulnerable to a security flaw in OAuth2 authentication. This vulnerability allows an attacker to potentially obtain the client ID and secret, leading to unauthorized access to user data. |
| A denial-of-service vulnerability exists in the Rockwell Automation PowerFlex® 600T. If the device is overloaded with requests, it will become unavailable. The device may require a power cycle to recover it if it does not re-establish a connection after it stops receiving requests. |
| A vulnerability was found in D-Link DIR-852 1.00CN B09. This vulnerability affects unknown code of the file /htdocs/cgibin/hedwig.cgi of the component Web Management Interface. Performing manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was determined in D-Link DIR-852 1.00CN B09. This issue affects the function ssdpcgi_main of the file htodcs/cgibin of the component Simple Service Discovery Protocol Service. Executing manipulation of the argument ST can lead to command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer. |
| go-gh is a Go module for interacting with the `gh` utility and the GitHub API from the command line. A security vulnerability has been identified in `go-gh` that could leak authentication tokens intended for GitHub hosts to non-GitHub hosts when within a codespace. `go-gh` sources authentication tokens from different environment variables depending on the host involved: 1. `GITHUB_TOKEN`, `GH_TOKEN` for GitHub.com and ghe.com and 2. `GITHUB_ENTERPRISE_TOKEN`, `GH_ENTERPRISE_TOKEN` for GitHub Enterprise Server. Prior to version `2.11.1`, `auth.TokenForHost` could source a token from the `GITHUB_TOKEN` environment variable for a host other than GitHub.com or ghe.com when within a codespace. In version `2.11.1`, `auth.TokenForHost` will only source a token from the `GITHUB_TOKEN` environment variable for GitHub.com or ghe.com hosts. Successful exploitation could send authentication token to an unintended host. This issue has been addressed in version 2.11.1 and all users are advised to upgrade. Users are also advised to regenerate authentication tokens and to review their personal security log and any relevant audit logs for actions associated with their account or enterprise. |
| The WP Hotel Booking WordPress plugin before 2.2.3 lacks proper server-side validation for review ratings, allowing an attacker to manipulate the rating value (e.g., sending negative or out-of-range values) by intercepting and modifying requests. |
| The Password Reset with Code for WordPress REST API WordPress plugin before 0.0.17 does not use cryptographically sound algorithms to generate OTP codes, potentially leading to account takeovers. |
| pyjwt is a JSON Web Token implementation in Python. An incorrect string comparison is run for `iss` checking, resulting in `"acb"` being accepted for `"_abc_"`. This is a bug introduced in version 2.10.0: checking the "iss" claim changed from `isinstance(issuer, list)` to `isinstance(issuer, Sequence)`. Since str is a Sequnce, but not a list, `in` is also used for string comparison. This results in `if "abc" not in "__abcd__":` being checked instead of `if "abc" != "__abc__":`. Signature checks are still present so real world impact is likely limited to denial of service scenarios. This issue has been patched in version 2.10.1. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| NVIDIA Triton Inference Server contains a vulnerability in the model loading API, where a user could cause an integer overflow or wraparound error by loading a model with an extra-large file size that overflows an internal variable. A successful exploit of this vulnerability might lead to denial of service. |
| ClipBucket V5 provides open source video hosting with PHP. ClipBucket-v5 Version 2.0 to Version 5.5.1 Revision 199 are vulnerable to PHP Deserialization vulnerability. The vulnerability exists in upload/photo_upload.php within the decode_key function. User inputs were supplied to this function without sanitization via collection GET parameter and photoIDS POST parameter respectively. The decode_key function invokes PHP unserialize function as defined in upload/includes/classes/photos.class.php. As a result, it is possible for an adversary to inject maliciously crafted PHP serialized object and utilize gadget chains to cause unexpected behaviors of the application. This vulnerability is fixed in 5.5.1 Revision 200. |
| ClipBucket V5 provides open source video hosting with PHP. ClipBucket-v5 Version 5.5.1 Revision 199 and below is vulnerable to PHP Deserialization vulnerability. The vulnerability exists in upload/upload.php where the user supplied input via collection get parameter is directly provided to unserialize function. As a result, it is possible for an adversary to inject maliciously crafted PHP serialized object and utilize gadget chains to cause unexpected behaviors of the application. This vulnerability is fixed in 5.5.1 Revision 200. |
